Video není dostupné.
Omlouváme se.
Snow Day 2022! Cub Cadet 2166 Plowing Snow
Vložit
- čas přidán 20. 01. 2022
- Woohoo! We woke up to a little over six inches of snow Monday morning, so we put the snow plow on the salvaged Cub Cadet 2166 and cleared the driveway.
Are you into 2000 Series Cub Cadets, too? Join the conversation at / 3795820163780960
We post more stuff about our various endeavors all over the place!
/ solunagarage
/ solunagarage
/ solunagarage
Get more information about us and what we’re doing at www.SolunaGara...
Good stuff, Justin. Getting a plow, chains, weights, and snow cab for my 2554 tomorrow.
Snow cab!
I think this snowstorm surprised a lot of people. Another channel I follow is in the Canton area received around 18 inches. The Cadet did a great job.
Great little snow mover blade on this one. Light duty, nothing like the old IH stuff but you can't beat it for the small work. We were hoping for 10" but didn't quite get it.
Awesome video! Excited to see more!
Thanks! Appreciate you taking the time to comment.
Is that a lawn tractor or garden tractor?
Lawn tractors have a smaller weaker rear-end they do not have enough umph to push a lot or do any serious garden type work without blowing out the hydrostatic transmission.
I wouldnt push snow with a lawn tractor.
Bad idea.
Now looking at it after you pull out of the garage I notice a tiller attachment that means its a true garden tractor and it was built to push snow move large things and till up soil. Its a workhorse.
It's a garden tractor. A light duty one, but still has a strong frame, drivetrain, and rear end.
Thanks for your videos! especially the one on the new GT's. I recently purchased a GT3200, today I was plowing snow with it- and working very hard. The snow is hard and crusted with ice. The issue I had was towards the end of my work, the hydraulic system started failing, the plow would not lift, the power steering was hard to move, and the hydro got really sluggish. Could I have just overdone it? What might be the issue? I limped back into the garage, and got my old 1650 out. Thanks!
Thanks!
3000 Series are awesome machines, though they have their issues just like anything else.
Have you checked the fluid level? Has the filter been replaced with a proper hydraulic filter?
If the basics above are good, I would suspect you may have a failing charge pump gerotor.
@@SolunaGarage Thank you so much- and no- when I first got it I added the proper cub cadet hydro fluid but did not change the filter- I do have a new filter and need to do that. I will keep you posted- Thanks again!
Make sure you get the correct filter or equivalent - a standard automotive engine oil filter won't work. Good luck and let me know how it goes. Thanks for keeping the old 3200 alive!
The two I use:
Cub Cadet 923-3014
Wix 51410
@@SolunaGarage thanks so much, I’ll keep you posted
What tires are you running on the back of that? Id like to find some good snow tires for mine, but a lot on the market are too aggressive or not aggressive enough
Ocelot golf cart tires. 23 X 10.50 x 12
@@SolunaGarage I ordered some 20x10-8 carlisle alltrails for my 2135. Not sure how much bigger I could go beyond that and not rub fenders
@@jamespeck4895 23 X 10.50 x 12 fit fine. They are standard garden tractor size tires and you'll see them on the 2500 series and equivalents.
@@SolunaGarage How is the performance with the 23's compared with 20's?
The ride is better, absorbs shock and makes the jobs where you are on the machine for hours less painful. Performance is totally different, but that is based on the tread type and the fact that they are brand new rubber.
Is there a number for that plow assembly!?
# 302 42" Front Blade
Part Number 190-302-100
Thank you
I see them on CL and FB Marketplace for 100-200 pretty regularly. They are the most common attachment for the 2000 Series.
I gave 100 bucks for the snow blower attachment 4 years ago went to get it
Dam thing had only been used 2 or 3 times. I think I've used it more.