BLEW UP A PRIUS?! 2010+ Toyota Prius 1.8L 2ZR-FXE Engine Full Teardown
Vložit
- čas přidán 14. 05. 2024
- Check out our website at www.Importapart.com or email us at importapartsales@gmail.com for parts and part inquiries.
I've been tearing down engines on camera for 2 and a half years! Search my channel to see what I've torn down. Here's a few recents:
Mini Cooper/PSA N14 • JUNK Mini Cooper S (BM...
Ford 1.0 Ecoboost 3cyl • JUNK Ford Ecosport 1.0...
Infiniti/Nissan VR30DDTT • 60K Miles on 1 Oil Cha...
Dodge Ram 8.0 V10 • 8 LITERS OF DESTRUCTIO...
Todays engine is one often thought to be impossibly reliable, but like any engine ever made, the general public has found a way! A 2010+ Toyota Prius 2ZR-FXE. This is a 1.8L Atkinson cycle aluminum 4 cylinder that makes just shy of 100hp on its own. With the relatively low power output, you'd assume these low stress engines would run for ever but really, these engines are kinda notorious for this type of failure. That's why used engines are $2000-3000 even with higher mileage. The high price of a used engine usually means there's a significant demand and a relatively low supply of good used engines.
Why am I doing this? I own and run a full service auto salvage business and part of our model is dismantling blown up engines to salvage the good parts to resell. We do not rebuild engines, but we do supply parts to those that do!
I really hope you enjoyed this teardown, as always I love all of the comments, feedback, and even the criticism.
Catch you all on the next one!
-Eric - Auta a dopravní prostředky
Post your data sources... otherwise your blowing smoke from where the sun doesn't shine.
SURELY MY FRIEND
static.nhtsa.gov/odi/tsbs/2016/MC-10132912-9999.pdf
static.nhtsa.gov/odi/tsbs/2016/MC-10132913-9999.pdf
www.toyotaownersclub.com/forums/topic/187742-3rd-gen-prius-oil-consumption-head-gasket-issues/
priuschat.com/threads/egr-clogging-is-it-possible-to-avoid-it.233414/
priuschat.com/threads/how-to-prevent-the-3rd-gen-prius-headgaskets-failure.233115/
www.toyotaownersclub.com/forums/topic/187742-3rd-gen-prius-oil-consumption-head-gasket-issues/
I TRULY HOPE YOUR REQUEST HAS BEEN COMPLETELY SATISFIED
Sincerely,
- a guy who would never own nor recommend an early 3rd gen Prius.
Get schooled scrub 😂
Literally woulda took 5 mins on google tops but you had to make a fool of yourself
@@I_Do_Cars
You must hate Toyota's, but sure. You have provided 'facts'. What do you recommend for reliability? Audi? Perhaps BMW
@@hariranormal5584 I actually love Toyotas and I think they’re amongst some of the most reliable Japanese branded cars you can buy. I own two.
That’s why when they have a notorious problem it really stands out.
If you want to take what I say as an attack on the brand, I can’t help it. 🤷♂️
@@hariranormal5584 I mean look at the vehicle next to my name… it’s a Toyota 😉
"It's a reliable car" means you shouldn't be stranded by it or need to throw lots of money at it. It doesn't mean you can completely forgo preventative maintenance. A lot of people have a hard time with that distinction.
For "a lot of people" there might as well be a hamster-wheel under the hood ;)
😂😮😂
To the comments so far.
Even reliable engines need the oil checked or changed
Its electric, really the gas motors cheper then the batterys are
My kids prius battery failed under warranty the bill was over 2k for a rebuilt unit i believe ( seems the hampster was out of nuts)
No seriously its not a bad car, but you cant forget you have to matain the gas motor like any other car.
Gas mileage is friknig outstanding if driven right.
I think they should have just used a air cooled 26 hp diesel engine that runs on any fuel type to charge the battery and the battery for motion
The motor is a jet like the Abrams a1 tank but exhaust gases are reburnt and it only runs to charge the battery, heat off the motor can be used to keep the car warm in the winter and start on its own even without the key in a parked outside mode it uses detection to find the spaces its in or if its outside, its also a plug in hybrid so if its plugged in its always warmed up ready to be driven, no snow on it.
The body is aluminum/fiberglass and not ferrous materials so it cant rust its water tight dust tight and water dust nor anything else can get inside it parked
If there's a flood it just floats.
I know from experience that Toyotas are extremely popular among penny pinchers who buy them with the idea that you can save by skipping the maintenance on one. And on the rare occasions they do maintenance on it, it's the cheapest place they could find or just by themselves with very little clue about how to do things.
Old Toyotas here are often absolute ticking timebombs due to years of neglect and half assed repairs.
As a Taxi driver, I drove the Prius for 14 years. Never had one blow up. In fact, it was one of the most reliable cars I have ever driven. Considering what we put them through, that's quite an achievement!
Proof that regular inspection and maintenance works!
The only reason I bought one was because the taxi drivers in Chicago were driving them to 300,000 plus miles. If they can take the abuse of taxi style driving, my hwy driving was going to be easy on it.
What did you do for .get long millage
Most of the people who drive a Prius don’t know that you have to check the oil and change it on a regular basis. I watch your channel religiously. I’m a retired heavy duty mechanic and enjoy watching the carnage.
My 2010 started to go around 250,000. I pulled the head and installed a new head gasket, water pump and timing chain.
Also I think one of the most overlooked things is the pcv tube hiding under the intake manifold, completely clogged.
Back together and now with 25,000 miles on her still not burning any oil like it did previously. Thanks Gaskets Masters for some helpful tips.
it exploded🤣
My Fiat diesel (bought with broken cam chain) has been fully rebuilt and now doing fine. But the head and inlet manifold were severely clogged with soot. It had been driven ridiculously slowly leading to spot deposition and excessive loads on the cam chain. Pretty carp for 120K but Brits do 1/2 the miles of USA and mostly in town. These particular engines have sacrificial rockers so valves usually survive.
That's how they go. Did you have oil in your intake manifold? PCV is the culprit usually
You have to clean out the EGR cooler, EGR valve, and small passages from the EGR system in the intake manifold roughly every 80k-100k miles. At that same time change the PCV valve and also install an oil catch can so it doesn't get plugged up like yours did!
@@jimsgaragetoys4963 I just replaced my intake all together. Cleaning out the small passages within the intake is almost impossible. Better to just replace it and it takes less time
“How do you blow up an engine at 56mph in the left lane?” I laughed out loud😂
It’s so true. Prius drivers are some of the slowest and most annoying on the road and their engines still blow up because they’re poorly designed.
@@sharedknowledge6640 You were referring to the drivers right? 😆
@@sharedknowledge6640 Not only Prus drivers. All Toyota drivers . Always below speed limit
@@sharedknowledge6640 I had a teacher in high school with a Prius. He would go 55 in a 40 and pass students in the center turn lane.
@@sharedknowledge6640 I don't drive that way and I own a Prius. 2nd gen and I've had mine up to 130 mph. It's a weird thing too. At about 45 the aerodynamics of the body starts to really show. I've gotten on the highway, got up to sped and then 10 minutes later I'm doing 80+ and no, I wasn't "giving it the beans" either.
I’m sure you were having LT3 flashbacks with the dipstick. But the forklift practically lifting the engine by the dipstick, is a whole new level.
The dipstick resistance are going too send a terminator from the future too handlenthis guy
It's all fun and games until your dipstick gets seriously stuck.
I don't know why he even bothers with an engine stand, the manufacturers make the dipstick tubes that tight for good reason.
The dipstick is stronger as the connecting rods?
@@Swedish_John_Wickj
It's simply amazing the amount of torque that MG1 can put onto the engine. You can fully hydrolock one cylinder and the motor will spin the engine over regardless, leaving the rod in all sorts of fun shapes. On this engine, I would expect low oil to have caused the #3 rod bearing to spin, which lead to the localized overheating on the crank and subsequent failure.
I don't know where that engine comes feom but my Prime like to turn oil into mayonaise during winter so i buy the lacks of lubrification theory.
Water from outside in the oil? Strange. And its not coolant? @@marc-oliviercabot3380
not true. There is a clutch assembly pack with dampening springs in the torque converter to prevent this.
the clutch is always engaged but will release at a certain amounts of torque. Look at assembly diagrams of a prius Hybrid you can find this safety device.
I'm stunned, I never thought I'd see you save a WATER PUMP 🤯
He made $50 !
Our 2013 Prius V courtesy car made it 350k km before the head gasket went. It was burning quite a lot of oil at this point. Found a 130k km used engine and it's back up and running. Still a great vehicle. Still on the original hybrid battery. Wish Toyota would bring the Prius V back.
I think that wagon body with the new style would look pretty sweet. Sadly I doubt we'll ever see it as it seems if something isn't labeled SUV or crossover, nobody wants it. I'd love a Prius V Prime with AWD.
I've found out, that 300k km is the magic number for head gaskets. Usually the engine starts to fart exhaust into the coolant, and the temp needle starts acting really weird.
215,000 miles really isn't great for a toyota
Exactly. Mine blew at 340k
Answer for head gasket failing is water pump. After 200k km they aren’t efficient and engine get overheated if use at higher speed or oil hasn’t been changed in time. This electric pomp need to be changed every 200k km
Anything will fail if you fail to maintain it long enough
To be fair, if it takes a hammer, chisel and a fork lift to change the oil, I don't blame the owners.
@@CheezeCracker Actually the fork lift is standard protocol and specifically mentioned in the Prius owners manual.
@@LongBoy.0 well, at least that says a lot about Toyota, VW didn't warn me about pulling coil packs
As Mark Novak likes to say: "Do the maintenance!"
I drive a Subaru, and it gets a lot of miles on it, because it's my daily driver and I have a 42-mile commute. But...I don't redline the engine unless I have to (it had happened) and I'm careful to get the oil changed on time whenever it's due for a checkup.
@@CheezeCracker I own a 2008 Prius. 210k miles, original battery pack. Oil changes 3k or 6 months. I don't have that issue with the filter. That is either a problem with the last instillation, lack of oil changes or it rusted from being outside.
My mechanic for my Prius made it very clear to me that any time I run my vehicle more than 65 mph the oil consumption goes way up. Some sort of mechanism to keep the engines running long and happy at higher speeds and higher rpm. That amounts to about a quart of oil every 1000 miles or so 75mph. You have to check them often and keep them full of fresh, clean oil. If you only drive around town the oil level basically never drops. Mine is closing in on 300k and it's been a happy engine.
I would think that if you only drove around town the gas engine would rarely get used. Maybe that is why around town driving didn't use oil. But hwy driving, where the engine is constantly running, the engine is showing it's true colors as far as oil burn goes.
Check out these 2 service bulletins that Toyota put out for the 4-cylinder engine they were putting in the Corolla and Camry cars for a few years. (T-SB-0024-11 and T-SB-0094-11) They were burning a quart of oil every 800 to 1500 miles after 50k of use.
You've GOTTA be kidding me!
@@InquisitiveSearcher I think you're confused about what a Prius hybrid is, versus what a Prius Prime PHEV is. A Prius engine gets used around town, because you can't plug it in to charge it, and it really doesn't get far on battery alone.
A Prius Prime on the other hand, like my 2017 Prime, can go as far on electric after you charge it, as it can go on 1/2 gallon of gas. The EPA says 25 miles, but for me it's usually more like 30-35 miles, sometimes 40 if at modest speed. Yep, that means that I normally get 60, 70, even 80mpg on gas alone, without dropping the battery state of charge. My last 43.0 mile round trip to a grocery store yesterday got me 248.4mpg, and would have been more if I hadn't forgotten that the defroster (hence AC) was on for the first several miles. 43/248.4 = 0.173 gallons .... plus of course the 6.6kWh of electricity I had charged it with. From experience, I know that the $0.79 of electricity I used, saved me 0.50 gallons of gas, and that using only gas, I would have therefore used 0.673 gallons and averaged 63.9mpg despite the defroster mistake and all warmup losses (which also happened while burning the 0.173 gallons I actually used).
I love that every time I get home after using up my EV range, I can "make a half gallon of gas" at a cost of $1.58/gallon. And it never knocks in EV mode, so that's really comparable to premium gas, for $1.58/gallon. And via the deal offered (to everyone, not just EV/PHEV owners) by my town through an alternate electric supplier, my price of "EV gas" isn't going up above $1.58/gallon until the summer of 2026 at the soonest.
Maybe I just got a good one, but my 2017 Prius Prime has 111K miles, made two 8000 mile round trips out west and has not used even 0.2 quarts of oil on either trip. And at no point did I go as slow as 65mph on the highway for any extended period.
In Texas, where the speed limit was 80mph, I set the cruise control on 94mph for a full tank of gas. But that gets me about 34mpg, so I actually prefer 84mph to get 42mpg all day long when I'm covering a lot of ground. In another unnamed western state, where there is a lower speed limit but plenty of places where you can see 10 or 20 miles ahead and behind, I hit the governor at 104mph (where it doesn't sputter, just acts like you set the cruise on 104) and set the cruise at 103mph until approaching a curve or somewhere a cop could be hiding. In yet another place, I was at full throttle or under braking during a 4000 foot drop in altitude down into a canyon, and a 4000 foot climb back out of it, on a road that looks like a caricature of twists, turns, hairpins, and short straightaways between switchbacks. It's an awesome car to push hard. Much, much faster cars simply can't run with it under those conditions, and those who try, end up with actual smoke coming from their brakes before they give up.
On one of those two trips, I also spent 17 days in southern AZ in temps up to 119F, and left the engine on 24/7 all month, except when filling the gas tank and checking the oil. It didn't use any, despite the engine running 700 hours that month.
I use 0W20 Pennzoil Platinum (sometimes Ultra Platinum, not always), for whatever that is worth.
I don't notice any difference in toughness or oil consumption, between it and a 2005 Prius I had earlier and actually didn't part with as a spare car until I'd had the Prime for 5 years. Both sure seem bulletproof to me.
@@EfficientRVer : Well, regardless as to if I am confused between a Hybrid and a Prime, I think you'll agree that the info that the dealer is giving to @abpob6052 about expected/normal oil burn is a pile of horse manure.
If you read up on those 2 service bulletins I listed, of which Toyota put out years ago for another 4-cylinder engine they made, you'll find out that the problem was that Toyota was using a piston with out enough oil pass through holes at the bottom of the oil ring slot. The excess oil in the oil rings would carbonize and then prevent the oil rings from working at all. This left lots of oil on the cylinder walls that would get burned up so the engine went though a quart of oil every 800 to 1500 miles. Toyota would give the customer, free of charge, a short block with the new/updated pistons but the customer had to pay for the labor of putting it in the car.
The rate of oil burn that @abpob6052 talked about in the original post just sounds so very similar to what was happening in a 4-cylinder Toyota engine years ago. Maybe a similar problem?
This is one of the best videos to date. Fork lift appearance simply to check the oil, that's something I havent seen before. While checking the head gasket the compressor kicks on, a compressor test. "Perfect timing" indeed, and fantastic. So after much consideration I believe there are more jokes in this video than there were piston nuggets, and that oil pan looks like the bottom of a fryer at a bad county fair on closing night, so you know it was packed with burnt nuggets, but somehow still not quite as many. As always this is another fantastic, fun filled, action packed hybrid edition teardown. Great content.
Just got back from the local Autocross. Seems like watching an engine tear down is the next logical step of the night.
Well, it’s part of the fun and adventure 😁
Good on ya. Killing cones, and hopefully not con rods.
In a world full of crazy right now, your channel is a reprieve! Thanks for keeping some semblance of sanity for us Eric!
Sanity ? What's that ?
@@thomasfletcher760 As long as I don’t have to hear about Trump and all his BS! Now that’s INsanity…
@@randy6350Rent free... no one mentions his name, obviously the world isn't one man, and yet it doesn't stop the terminally deranged from bringing up that name at every available opportunity.
If this were pre ~2015, this type of behavior would be recognized by the DSM-V as a mental disorder.
yet here you are bringing it up nonetheless oh well @@randy6350
@@randy6350TDS
I was surprised to hear Eric say 222,000 miles is early for an engine failure.
I have a 2010 Prius, and because of public knowledge of this engine being an oil-burner, I meticulously have checked the oil as long as I've had it. It never burns a drop and is now at 252,000 miles. I'm not saying this to "defend" my Prius, but because I'm curious as to why mine has been so dependable and near perfect, while this engine has a reputation of being the opposite. Even more so, because my car is not a garage queen or grocery getter. My previous vehicle was a Silverado Duramax 4x4, and I've treated my Prius nearly the same (off-road access trails, overloaded hauling, trips through the mountains, etc...). I'm paranoid that something bad could happen at any moment now. But every oil change (I do it myself), the dipstick shows exactly full, just as when I previously filled it after last change. And the oil is nice pale golden color, looks like it doesn't need to be changed.
Did the oil burning problem start at the end of 2010? Were ALL the engines from 2010 to 2015 the same, built at the same plant? I'm really curious to know if I have a ticking time bomb and the inevitable is coming at any time now.
Props to the dipstick! When you have to tag team it with a forklift, you know it was epic!
I could have gotten that dipstick out in a much shorter time, but the way you did it is WAY more epic and it will now be the way I do it from now on.
Do my spark plugs the same 😂😂
That tickled me too!
Diesel injectors....
50 ton gantry crane with sawzall-cut access hole through hood?
I love your postmortem inspections of engines. It's amazing how much you can learn by tearing into these dead engines!
We have 35 Priuses, many over 250k miles and a couple over 300k. We have been cycling them out over 5 years and never had one blow up. Head one head gasket, a few leak oil from the timing covers and oil changes are every 5k miles. Never had a battery go bad, even in our 2005 models that do have over 300k. Most reliable and dependable vehicle I've ever seen. Electronics can be finicky in some. Mostly shift modules.
What business do you guys use these in?
May I ask why you have so many?
@@kinglangren @dertmatyui utility locating. Most of our guys are hard on vehicles, stop and go environments. Typical work day is 10-12 HOURS, 200-300 miles, cars never get shut off. They have been battle tested. We might consider the Ford mavericks now since they are leasing the hybrid system from Toyota but we need to find out if Ford did what for always does, replace metal parts with plastic.
Well maintained they are bulletproof. Personally however, i need to do an oil change every 1-1/2 months during winter as the oil never gets up to temps and gets loaded with water. From March to December it's mostly ok but December to March i do like 2 oil changes just to flush the water.. I'm considering putting a sandwich oil cooler to actually act like an oil heater so it would get up to temps faster during winter months..
@@marc-oliviercabot3380 That's all true, oil, water and achieving a long engine life don't mix.
The early 2zr-fe engines did burn oil, but the piston rings were changed and the later generations of the engines do quite well. They used them up until 2018/2019 in Toyota Corollas. I own a 2019 Corolla with the 2ZR-FE - it's the last year before they changed to the Dynamic Force M20 engines. Toyota recommends 10k mile intervals and 0w-20. I run 5w-30 or 0w-30 for 3-5k miles. I know people who are at 300k or more on these engines. You need to take care of them and even the older ones before the piston rings were fixed will still treat you well. The oil in this engine and the filter look DISGUSTING. These call for 0w-20 which ONLY comes in full sunthetic. To get full synthetic oil that BLACK, you really need to abuse that engine. Someone ran this for WELL over 10,000 miles on an oil change interval.
I can't understand why so many people believe that you can treat an engine that way.
it's the egr cooler versions of the engine that have blowing up issues, that's not shared with corollas
The way the engine functions in the corolla is wildly different from how it functions in the prius, hence why they're so reliable in them but not the prius.
Toyota KNOWS (insider info) the 10 K is too much. But so many dealers give the farm away with free oil changes for like 2 years after purchase so Toyota obliges the dealers with an extended oil change interval to save the dealers money. seems stupid but I know this on good authority and no I will not reveal the source.
@@michaelbenardo5695 because they have no idea how cars work, all they know is "change the oil at X miles" a lot dont even know that X, because advice ranges from 3k, 5k, 7.5k, 10k which is a big range and the brain doesnt register it. and sometimes they forget. its a shame but a symptom of a overly busy life/society.
I have driven my 2013 100,000 miles interstate @ 80+ mph. Top was 105 and no oil consumption at all. Amsoil ev. 6 months, and Lucas fuel system lubricant each tank of gas. Runs great!
Eric,
I think it'd be really interesting if a motorcycle engine found its way into your shop. I know your primary focus is on cars, but maybe a grenaded sport bike or Harley engine may find itself in your vicinity one of these days. They aren't too much harder than car engines to yank apart, and 99% of the time, they're way smaller than your typical car engine. Lots of cool mechanisms and features set them apart from car engines too. Maybe some channel viewers are curious about bikes and how the engines work, and I bet they'd be really happy to see something way out of left field on the channel. I know i would ;)
Look back thru his list. A few months back he did a Victory engine.
One of those oddly satisfying sounds I've grown to love because of your channel - the crack/pop of the head bolts when they're loosened. Music 😁
I don’t know if this makes me a geek are not, but I look so forward to your engine teardowns on Saturday night
That dipstick removal was gold!
We need more mention of pig mat and angry parts removal with hammers and prybars !
I just found your channel, and I love your style of teardown videos. Definitely the most interesting and informative channel I've seen that does these kinds of videos
Thank You for showing and exploring my car's engine for me !!
The bend on that rod is impressive
Those Toyota engines sure make a lot of grunt at idle, huh?
It only had to break some thin & brittle aluminum, not a cast iron block too.
Pretty cool to me that it could bend like that without crumbling.
Electric motor makes sure that rod gets seriously bent.
Another great video to end the week. Keep up the great work Eric!
Great video, I didn't realize how amazing the Prius engine is! Thank you for an evening of chuckles too!
I pretty much watch these for the dipstick tube battles. The Prius engine did not disappoint! Lol, keep the great videos coming.
Shout out to Travis and Dane for hooking us up with a motor to tear down this week.... ✌
Eric showing how Jiffy Lube removes a oil filter was Priceless !!!
I don’t often disagree with you, but in this case I think you got it wrong. I don’t think it was a low oil situation at all. Looks to me like an isolated failure to cylinder 3 caused it to spin the rod bearing which caused the failure. The knock went ignored while that material went into the oil packing the pickup and filter and damaging the pump before probably lifting the bypass and pushing some of that into the other bearings. There is wear and scoring on the bearings but not nearly enough to scream lack of oil to me. It also doesn’t follow the general progression of lack of oil, ie the bearing condition get steadily worse the further down the oiling system you go. Not much scoring in the top end as well.
Like I said, to me this looks more like something happened to that rod, maybe a plugged crank passage, that caused the bearing to fail in over a short time. It shed bearing material pushing it into the oiling system and continued to run without operator intervention until the rod bolts let go from overheat. The crank then came back around and hit the rod ripping it out of the piston pin bore and ejecting it out the block.
Taught me a bunch about my wife’s Prius and my first gen Sequoia…cheers mate! Just subscribed!
You're becoming my entertainment on Saturday nights! Keep up the great work
Love your forensic analyst as you dissamble an engine. Great job and thanks for sharing your knowledge and time.
Yes this is one of my favorite things about this channel.
What carnage am I finding. 😊
I had a 2007 Toyota Corolla with a 1.8L engine and a C59 transmission. It was a great setup with plenty of power and as long as you kept up with general maintenance, it would go forever. My only complaint about the transmission is that the input seal is internal. I replaced my clutch, flywheel, rear main seal, and input seal all at once because I’m not a fan of doing any of that again. I had to disassemble the entire transmission. And it wasn’t an easy one to do. Worst of all, AAMCO won’t touch a C59 internal. They’ll replace the whole thing but they won’t replace an input seal. Toyota makes great cars but sometimes the design makes you wonder. Anyways, sold it while it was still going strong at almost 190,000 miles.
Holy crap, you did a request I wanted to see like… a year or so ago! Ran a 2016 Prius to 205k with no issues. Great car, drove it into the ground.
"Blue" definitely needs a raise !!!! LMAO as usual Eric !!!! AND the fork lift was magnificent with the Dipstick !!!!
My son has a hybrid. It's not a Toyota, but I've asked him about oil changes and he goes years between oil changes. He blew me off when I told him he probably needed to change it more often. Oh well. It's his loss when it blows.
Send him to this channel especially if Eric has done a teardown of the engine in his hybrid???
His attitude is so mind boggling. What is it about oil changes that the younger generations hate so much?
It really depends on which car he has, if it’s a plug in like the Volt he may only be putting a thousand miles on the engine per year and changing the oil when the car says it’s time. I do mine yearly on the Prius and at 330k so far it can’t be hurting it, no glitter on my filters so far.
@@906MediaProductionsoil goes bad with time, certain additives do not stay dissolved in the oil with time
@@user-vk2cd9qw7i correct, but if it was causing a major issue it should have wiped my engine by now considering the average car would be scrapped at 2/3 this mileage.
Hello, I really enjoy your videos! Your methods & sense of humor remind me of my mechanic mentor, Wally, who taught me pretty much everything I know about engines, cars, boat motors, etc. years ago when I was still a young person & before I chose to go into construction. He (like you do)always did a very methodical teardown and thorough inspection. I told my wife that you're a mechanical forensic pathologist. Btw, I'm into collecting & restoring old Mustangs & and whatever else my wife allows me to buy, (she's great!) Anyway, keep up the great work! Thank you!
sir we found the other half of your engine it's in your oil filter sir🤣
the complexity of that front cover is amazing!
Eric,
Another great video - thank you!
On all your videos now I click the like button before I even watch as I know Im going to be watching a great video. Dont stop doing what you do.
Much respect.
Paul (in MA)
well a guy at work his daughter got an oil change they didn't tighten her oil filter on and her engine gave up the ghost after two days from peeing it's oil out all over the street when the filter came off simply put she got a newer younger engine mileage wise due to that issue
As always another great tear down, Thanks Eric,
Another great teardown Eric! I had a good chuckle when you pulled off the upper oil pan and revealed an engine by Salvador Dali!
Awesome and informative as always Eric. Thanks to for the tip on how to remove a stubborn dipstick! 😂👍
That dipstick tube has some major tensil strength
I'd have got Dad's old bolt cutters onto it! :)
Never checking helps 😝
A fork lift to check the oil. Love it!
Epic dip stick battle!
It's in the Toyota manual.... 😁
I drive a 2005 Prius just crossed 200k miles. I had an 07 before that, both fantastic cars, easy to maintain, easy to fix things, timing chain lasts forever. The 1.5 liter is more durable that's for sure and I'm not missing any pep. You'd have to hold a gun to my head for me to ever buy the 2010-2015 Prius. Somehow that 1.8 liter blows up head gaskets too 🤔 Yea try making sense of that. You'd think an Atkinson cycle would be lower on compression but they increase the ratio so the Atk cycle compensates. Idk why they bust head gaskets tho, it's crazy and it happens to at least half of them once they hit 200k miles. No sir, I'm riding my 2005 til the wheels fall off, or until the 2016+ model is affordable. 2023 model looks great but I can't afford one until 2040 😂 or I hit the jackpot.
Not sure why but watching you fight the dipstick is always fun. Thanks mate!
the 1.5 was pretty solid in the gen 2, they're used a lot as taxi's here in the UK because they're ulez exempt, like any engine you have to get them serviced, oil is the lifeblood of an engine.
AH sprite owners manual checked oil, coolant & battery levels every day! Don't recall brake & clutch fluid and tyre pressure but were probably the same.
The 1.5 Litre Gen 2 Prius engine is literally bullet proof. I have mine serviced every year and I keep an eye on oil consumption.
Now I realise regular high speed runs will burn oil at 150k miles.
However it seems to use nothing during regular inner city commuting.
My engine runs as smoothly as it did when I first got the car over 10 years ago.
Shame about the Gen 3 Prius engine.
We have a 2011 prius, gonna be hitting 200 k soon. No issues so far but I admit, it does seem to consume more oil between intervals versus our 2004 rav4 and 2002 tundra both at about 200 k.. my Prius manual even says it can consume 1.1 qt every 600 miles! I am well below that mark, but it is still something that's been in the back of my mind..
Just right amount of knowledge, humor and sarcasm. Keep up the good work!
Thanks as always Eric, your videos are the highlight of my week... And you finally found a water pump someone might want to buy! ;)
you need one of those work tables the transmission shops use. the top is leaned slightly back with a gutter on the edge to catch all the fluid and run it into a catch barrel
I had a 2011 Prius and never had any issue with the engine. I took care of it correctly, which isn't generally what happened to engines that make it to Eric's video.
Oil changes are one of the easiest things to do.
How many miles did you put on it?
@@edwardspaccarelli5944 Sold it at 135k
I heard the problem was they used low tension rings round 2011.
Thanks Travis and Dane !
I learn every day something more from your channel. Never knew you have to check your Prius engine oil with a forklift
A 7.3 or 6.9 IDI international diesel from the old fords would be a cool video. Cool heads and cheap probably. Thanks and keep up the good work!
i do believe a 7.3l has been done
10 months ago. Just go to the 'videos' tab and click the 'search' button.
@@centauri61032 That was a Powerstroke. A 7.3 IDI has the same displacement as a Powerstroke and is also a diesel V8 made by International/Navistar, but that's pretty much where the similarities end. The 7.3 IDI is a bored-out version of the 6.9L. Both IDIs are completely mechanical, distributor-style injection pumps, no electronic controls. Until the last years of the 7.3 IDI, no factory turbo.
@@jasonhaman4670 Yup, you are correct. My error.
Those are pretty hard to destroy. Gutless but they're tough as nails
I had a 2010 Prius, paid $5K for it off the Buy here/pay here lot.
After Six months, the engine blew up, going up a hill it had gone up hundreds of times. I did keep track of the oil. I replaced the EGR cooler which was coated in grime, and I installed a catch can. A few weeks before the engine blew up, it had a bad misfire in the 2nd Cylinder. I got really good at removing the wiper cowel.
Then suddenly, it blew up.
Damn so what did you do to it? how many miles?
@@javajav3004 2010-2014 Prius engines have issues with piston rings causing oil burning issues. The piston likely cocked to the side, jammed in the cylinder causing the connecting rod to detach and spin creating an inspection hole
@@thatguyontheright1 "inspection hole" lmao i saw that on a plane once so you're not kidding.
How many miles was your prius at when it blew?
@@javajav3004 220k
The crazy thing about a prius engine failing is that you can't abuse that engine other than by neglect. You can't bounce it off the rev limiter cold, you can't drive it around in a low gear and rev the hell out of it, you can't money shift it. When a prius engine dies like that it died in normal low stress use, so you know someone neglected the hell out of it.
Not true, these things are plagued with head gasket, egr, failing electric water pumps, and huge amounts of oil burning issues.
I heard the Headgaskets go because of the many heat cycles, from when it switches from engine to battert power
There's a TSB for the dual-VVTi 1.8's burning exhaust valves, I just did a head on a '13 Corolla, but I have NEVER seen one of these blow up like that one. Insane!
Love your videos! For future reference, channel lock pliers are directional and you were using them backwards on the oil filter housing.
I saw that too and it’s not the first time I’ve seen him do it. No wonder he couldn’t break it loose.
I've owned two priuses (Pri-i?) and a Chevy Volt. Not a single problem with any of them -ever. Anyone who is too lazy to check their oil at least occasionally, deserves what they get.
Really enjoy the humor and comments while you're dismantling the egines. Keep on truckin'!!
Thanks for the 2ZR tear down!! I didn’t know a forklift was required to check the oil. I’ve been doing it wrong.
Some rods get bent that way, but it's okay, they still work normally. And it's kind of unique!
Most engines in my family outlast the frame because of Michigan winters and salt. We can make them last about 20 years minimum. I know a 1993 Saturn SW2 could of last a few more years if it didn’t crash. Not our fault and it was cheaper to buy a new car than repair it.
What kind of oil did you use and what was the interval?
The bane of the salt belt. You csn expect 10-12 years before you start seeing serious corrosion if you arent dilligent about woolwax / fluid film / or some treatment.
Well done, Informative and detailed. Thanks for taking the time to share your knowledge.
I loved the video. I own a 2014 that I've drive about 140k in 6 years. I feel victim to needing a head gasket. I proactively replaced it at a costly coin as it was consistently hard starting, blowing the white smoke, and probably used just a few ounces of coolant a week. What I wished I would have done in hindsite, was see how long it would have gone, but I'm not a gear head and I couldn't get a consistent answer on what would have happened had the head gasket blown completely. I can definitely say that I did the 10,000 mile oil changes religiously and I never checked the oil *until* the dealer casually told me one time "bro, your oil was low today. Be careful." Not their fault, but I do wonder how low it was during other oil changes (always the dealer). Oil is cheap, engines are expensive. Now I know. One question that I don't know that I've ever found the answer to... why do the burn oil? I'm asserting that if you check the oil regularly, don't let it run low, and don't let it go 10,000 miles- you'll be fine.
8:05 My 1993 Camry V6 has an EGR cooler underneath the intake manifold. I was very surprised to find that on such an old engine.
I know someone who needed an engine on a relatively new Prius because they took it into the Toyota dealer for an oil change and they went to change it while the car was still "On". The engine decided to fire up on its own with no oil in it while in the air, and by the time they got to shut it off it was too late.
Ouch. I hope the dealer paid for that one.
I would assume the hood was open? If so, crazy an engine would fire like that with the hood open.
@@mph5896 sometimes I leave the care thinking it was off but it's not ofc it warns you with a beep sound if you leave without the key but if the key is inside you don't realise sometimes if the engine is off because it's using the hybrid battery so you hear nothing and then will turn engine on automatically to charge, it's not easy to see sometimes because when it's off and leave the screen is still showing stuff.
@mph5896 as far as I'm aware, the first-gen Chevy Volt was the first hybrid vehicle to force the engine to run when the hood is opened to avoid such an issue. The Prius doesn't.
@@mph5896 Aye. The Prius doesn't give a flip whether or not the hood's open as for whether the engine runs or not. The 2nd gen at least (source: own one) doesn't have any kind of hood switch to tell the computers whether the hood is open or not.
This car was one of the first commercially successful hybrids, and they still went by some more conventional car design paradigms. Such as not tracking whether the hood's open or not.
And as Patrick noted, the car's ghostly silent if powered up in battery mode. Even if the A/C's running, a tech might not hear it in a loud automotive shop until it's too late and the car says "Oops, time to recharge".
Super entertaining and informative. And thank you for not cussing!
Ex-2010 Prius owner here. Something like 1 in 10 cars in Japan are some sort of Prius, probably because all the taxi companies switched to them. There's even a variation with a special over-sized body specially for them. They are so common that it was going to cost me more than the car was worth to fix the brakes suspension, which were the only things that really needed work after 9 years. I can't remember what mileage I had on it, but I think it was around 100,000k or so.
I am impressed that this engine is actually all metal! Cam cover, oil pan... So many modern engines seem to be putting plastic in strange places.
Yes, the lack of a plastic valve cover was disturbing. Apparently they didn't take the challenge from Ford of who can make the cheapest (in both senses of the word) 4 cylinder car engine.
It's always fascinating to see what happens to all those happy engine parts when they loose their integration! These are always fun!
Thank you Travis and Dane ❤
Best dipstick tube fight I've ever seen, right down to it giving up when you took the chain off and the subsequent roar of triumph.
Great work Eric! Love your videos! Still hoping you can tear down a 1.8 out of a 2016 Chevy Sonic, and a 2.4 SRT4 engine out of a 2003 PT Cruiser GT that has the aluminum intake setup on it. As usual another great video!
Would be awesome to see the PCV plate removed from the block and see what's underneath. It's always interesting to see how different manufacturers approach crankcase ventilation differently.
A friend is a Toyota master tech. He says he gets a lot of Priusesssss in where the owner has ignored the red triangle of death and now the engine is a glitter factory. More than once he's seen where there's some dash trinket blocking the warning lamp completely.
You have taught me a valuable lesson with your request to keep checking the engine oil and sticking to the change intervals. I think here in the UK we don't generally do as many miles as American cars do (it would be very boring driving round our little island just to get over 250k on the odometer!). Strange to say, but until recently I had bikes and even though I only used them in the summer, I changed the oil every other year, come what may. Why not the cars you ask? Lord above knows, but I promise to do better.
Keep up the very entertaining show and my best regards to Blue!
As a former 2007 owner, I am VERY impressed at that one. Granted, in NJ I regularly took the car to rather constant runs up and down our stretch of I95, as well as the GSP and similar. (Working 3rd Shift helps a LOT here). And was fairly good about oil changes too, though I did lapse one year (partially due to grief - mother passed away at that time). Always kept on top of the engine warnings, or when it went into 'limp' mode. Served me well, and I hope the Ioniq Plug-in works out similarly. I still miss CVT a TON though, a year and a half later...
You are the first person I have ever seen who says they miss a CVT. Congrats, and you have earned my respect.
I thought it was a mistake and CVT meant something else. @@dawsonfradin9071
@@dawsonfradin9071same lmao
I95 is in NJ? Learn aomething new every day! Next thing ya know 295 will be in PA.
@@dawsonfradin9071Dude the Toyota hybrid “cvt” is amazing. It’s the best transmission for daily driving. This is from someone that used to own multiple 80s-2000s manual BMWs at one time cause I was that much of a car enthusiast. Now I have 2 manuals and 2 automatics. The rav4 hybrid is my favorite for commuting.
I worked at a Japanese specialty shop for about 5 years. The shop had been open since the 80s and only ever worked on Japanese vehicles (just Hondas and Toyotas at first, then Subarus and Nissans later). The original owner still owned the place and had 40+ years of experience with Japanese vehicles. For all hybrids, he recommended 7500 mile oil change intervals…except for 2010+ Prii. I asked him why, and he said “our customers don’t know how to open the hood and those Prii will *not* last 7500 miles on an oil change.” Ok then lol
Change your oil at 3000 miles or one year and you will NEVER have a problem-
Great post!
Yes, 3K - 4K oil and filter changes. Oil is still cheaper than metal.
I change the oil in my Prius once every year (10,000 miles) - Toyota Dealer UK. I top up if required - never during city driving but only after long distance trips across country at sustained 70+ mph. I normally cruise at city speed limits using cruise control where ever possible. Bought the 2008 Prius at 54k miles. Has now reached 150k miles (UK) - no problems at all. I use high quality oil, not cheap stuff. Economy reading is presently 66.0 mpg with 4 bars of fuel to go and 420 miles out of the tankful so far. My best record was 69.4 mpg @ 653 miles from my 45 litre tank of fuel - during a blistering heatwave last year.
the service regiment for my 2021 hybrid 1.8l corolla is once a year or every 1500km (9320miles), what ever comes first. I wonder why its different depending on which country you are in.
@@albinfiskare Different oils, different climate, different driving conditions?
This engine is very reliable, if you do the maintenance required for it to stay in top running order. Most Prius owners never service and clean the EGR Cooler, EGR Valve, and the small EGR passages in the intake manifold are critical to keeping the engine running properly and not blowing a head gasket. I service can be expensive if you have a dealer do it since they just replace parts but if owners do the work themselves and clean the parts they can save a boatload of money and after doing it the first time the process isn't very hard to do. The early 3rd Gen Prius has a bad reputation because of owners not doing this service when needed. If done every 80k-100k miles you should be able to catch it before the EGR cooler gets completely plugged with carbon and the engine will remain very happy. This engine also responds very well when an oil catch can is installed. My wife loves her 2010 Prius and it runs like new because I do the proper maintenance on it.
Great show, loads of fun, thanks for a good mechanical laugh mate!
This video made me go check my oil. Looks great, smells good, only has 4k ish miles on it (well within mileage for my car's oil change intervals)
Same. These videos make me paranoid about my engine oil.
5k is the longest I’ll ever go on oil change intervals. Seen far too many engine/timing chain failures at the higher intervals that even manufacturers tend to recommend.
Tech tip: you were using those channel locks backwards on the oil filter cap. Flip em around and the jaws will be oriented so that they don't slip away from the cap but rather the cap fills deeper in and gets clamped tightly. 😎👍
Eric showing how Jiffy Lube removes a oil filter was Priceless !!!. Anything will fail if you fail to maintain it long enough.
I owned G1 and G2 Prius. No complaints, no carbonization issues, no oil burning/leaking. Seems like Toyota wants the '70s back.
Watching how all a bunch of motors fail on this channel is most of the reason why I am always checking fluids on our 3 cars. Just got a check engine light on our 2009 Honda Fit the other day (don't drive it so much these days) with 150k miles. Borrowed neighbor's OBD scanner to see what's going on, hopefully it's something silly like a sensor that I can order and change real quick. Seems to run fine though but I'd like to catch whatever it is before it potentially becomes a lost cause. I wonder how many miles we'll end up getting out of her after all is said and done. I was hoping to teach our oldest daughter how to drive a stick in it, after letting her get the feel of gas/brake/steering in the automatic Pontiac. Fingers crossed!
2014 had redesigned piston rings and the 2015 added redesigned pistons. Both of those improvement pretty much solved the oil consumption on those 2 models. All of the 3rd gen Prius had problems with the EGR cooler clogging up and causing head gasket issues.
I've never understood how a clogged EGR can affect a head gasket, how are they connected? Not saying it's impossible, just that I've never run across an explanation for how one causes the other. Can you offer any insight?
@@myself248 Part of the exhaust gases flow from the exhaust manifold through the EGR system back into the intake to be put back into the air flow (you're basically re-burning those gases for emissions/efficiency). The EGR cooler reduces exhaust gas temperature as it passes through, leaving behind carbon deposits that build up over time. Eventually, the EGR cooler, EGR valve and piping get so clogged up with deposits that it increases exhaust back pressure, basically putting the engine at greater risk of popping its head gasket.
I'm sure someone over at Priuschat has a far better explanation of what goes on and how a clogged EGR system takes out these Gen 3 Prius engines. I had one @ 180k where the previous owner never touched the EGR. Cleaning all of that crap out was........"fun."
So good, so fun. Thanks Eric.
I've got a Prius (47k miles only, with oil in it), thanks for the great, instructive teardown, love the humour.
I'm so glad you struggled with the oil filter cap! Like I do every oil change for the wife's prius ('11). I replace the o-ring every time just hoping it won't be a nightmare to loosen the next time
The only reason we haven't replaced ours is purely the reliability (and being paid for). I can ignore a lot of the maintenance items my Truck needs constant attention for, being the choice for any long-haul drives. Replaced one nightmare front wheel bearing a few months back, otherwise nothing but oil changes and brakes over the 40k mi the wife has put on that prius (at 110k now)
When you put it back on just tighten it with your wrist as soon as the plastic canister base contacts the metal and it stops turning from wrist pressure you're done this is the secret 175,000 miles on my Corolla same Engine I change the oil every 5K
My 2004 Dodge Intrepid 3.5 never gave any warning signs before it started Knocking. Drove it 30 miles to my dads place and parked it on the grass and held it wide open until #2 rod went through the block. Surprisingly it still had oil pressure after deleting that rod.
😂 sometimes you just have to show them who's boss.
@@Me-zo8yc yeah. What else do I do with it. Not like can do much short of putting in a different engine. It wasn’t worth rebuilding so might as well have a little fun with it
My daughter has a 07 Prius with over 200k miles, yes it burns oil a lot of oil. I check the level every time she’s home, not fun to drive but it gets great gas mileage and my daughter loves it for that