Tractor & Truck Pulling Mishaps - 2022 - Wild Rides & Fires!
Vložit
- čas přidán 11. 11. 2022
- Tractor and Truck pulling wild rides, wrecks, and fires from pulls across the United States during the 2022 season. All drivers were ok.
Video by JP Pulling Productions
jppullingproductions.com/
/ jppullingproductions - Auta a dopravní prostředky
5:40 that belt dance as it runs away is spectacular!
Belt said "F**k this I'm out!"
That was awesome 😂
I love physics 😂
5:40 blower belt said ✌🏼
If you look close, it looks like the crank pulley broke to me.
Thanks for putting the best one at the beginning where the motor went flying
spend tens of thousands building a puller and $10 on the front wheels😅
Lol, I noticed that. 🤣
Always good for a laugh.
What’s yours have on it?
$15 at harbor freight 😂
Fr
Man that one at 10:30 must have been powered by the souls of the damned. Never heard an engine wail like that when coming apart.
Lol the wicked whitetail
Probably a demon or two
Sounded like it was just doing its mating call. Its called the wicked whitetail after all 😅
Charge pipe came off. Make loud whirring sound. Engine didnt die.
@@billmedvec5514I’d say exhaust dump broke/melted off. Remember there is extreme egt’s and also back pressure in there. Blowing a hole/crack just like an oxy torch. The reason I say this is because you don’t get that kind of soot out of the charge pipes coming off
Tks by showing the distance as well. A few guys can learn from you😀 from South Africa
On 07:25, perfect light, perfect camera angle, way above tractor pulling. Just.. perfect footage. Probably unwanted, amateur maybe, but very very beautiful, just some good luck anyhow... Incomprehensible by most, pure art 👏
I enjoy watching, but this hobby obviously takes a lot of money, time, and skill. Those rigs cost a fortune and there's the equipment needed to carry them around. it takes a lot of time to build, maintain, and haul them. They always break at some point costing even more money and time.
They are sometimes pushed to and past their limit.
If I remember correctly, one of the rules is that the engine's block has to be stock, so it's gonna break eventually
They also require balls. 😂
@@dmitri546 don’t sound stock to me
Hot rods of any type are strictly a rich mańs hobby.
I realize the drivers have helmets, but I notice none of the roll cages have foam padding. I'd think the "bell ringing" could be less violent if there was some softness on the cage itself.
I shouldn’t be so entertained by watching thousands of dollars and hundreds of man hours literally go up in smoke. But alas, here I am!
You know these V8 powered lawn tractors really oughta upgrade their front ends. Them control arms come apart like they're stock Craftsman lawnmower parts!
Half of them wouldn't blow up the way they do if they'd let of the throttle when they quit moving forward.
Lol those little bitty wheels.
Talk about serious TORQUE!!! 🚜🔥
Folks: “Hey let’s go watch a sport that is literally tractors pulling stuff until they break.”
Also Folks: “OMG IT BROKE!”
Man muss sich echt fragen, worum die keine Pulverlöscher benutzen...
Wow was surprised to see a Walsh Bros tractor. I thought they got out of pulling completely after the mishap at Fort Recovery,Ohio
They have been back out pulling the last few years. At first the had 2 turbines Mods. In 2023, they ran the "4 Aces" turbine mod and "Irish Challenger 2.0" as seen in this video.
Anymore else notice when the weight box slams the front of the drag sled that's when a bunch of these blow a drive shaft?
I wonder if the failed runs wouldn't occur so frequently or dramatically if the front axles on certain machines (e.g., 3:33) weren't so comically undersized relative to the weight they have to bear.
That's not the only point, if they would use something like a shock absorber the frontwheels won't break apart from the frame...
Sometimes there’s rules that limit what you can’t do. Generally the idea is that you want to save the weight on the front so you have more weight you can move around to get the right balance for the track. If you did big wheels and heavy suspension that’s a hundred or so pounds you can’t move around.
Every single one with the tiny little shopping cart wheels on the front does the exact same thing. Bounces. Breaks a wheel off and drags to a stop in the mud. I’m watching this wondering why they even build those. They seem inherently flawed lol
According to several people (granted in CZcams comments) its not super common. This is a fails compilation. Theres 1000 we don't see, where they worked perfectly.
Ouch that one at 5:40 mark looks like he busted the snout on the crank that sucker moved back and for a whole bunch
Glad I ain't the only one who seen that.
Black international was beautiful even hanging from the forks.
"Bang-up" vids!!! 👌👌😎😎👍👍
Small ones bounce and break the front axles. Springs not allowed?
I loved when the announcer said he builds engines for a lot of people. Then he blew a rod out of his engine😂😂😂.
The tiny front wheels bending is hilarious
5:00 in had to be my favorite
В чем смысл соревнования и что за технику они таскают на прицепе?
Looks like some VERY exspensive days for these boyz..... but dam fun, unless your paying for it of course....
Talk about driving it till the wheels fall off. 😂
I always thought someday I might build a superstock tractor. I think I'll just stick with pulling the 185 allis and the 4440 jd at the local county fairs. It's alot cheaper!😅
The thing I noticed is the mishaps happen when the tractor starts bucking like a wild bull. When it starts doing that you need to get off the throttle
Not always
I'm sure the professionals doing this will appreciate your advice.
That would be ok if you could have another go at a pull but because you have limited pulls 3 I think but Im sure I'm wrong, it could be more could be less either way you make every pull count
@@macfletcherhotmail you're limited to one hook
It must be heart breaking for the team and owner when these machines go bang....
Looks to me like the little lawn tractor division have front tire break off problems 9/10. Doesn’t seem worth it to put a decked out big block on those things
They rarely have problems. Remember this is a mishaps video. We probably tape over 1000 to 1500 passes a year (maybe more) and these are the only mishaps.
They are the billy baloney of the pull class .. like a red headed step child
Good Post. Thank you.
Cool video but I noticed any tractor with little tires in front just get toasted.
Keep in mind this is a mishaps only video from a whole season of passes. We probably tapped well over 1000 passes last season.
lol i grew up close to bowling green where the nationals used to be. those commercials every year where classic
20k on the engine.
5$ on the front wheel.
Love how it’s all 2nd gens.. 😂👍Still gonna rep my 96
You always want a straight level pull on the engine. When they start bucking up and down the fuel pedel, its not going to end well.
Those mini rods are like trying to steer a bottle rocket!
i wanna know where they keep getting all of these big block Blower Motors
asking for a friend...
5:39 That's a new one.
@5:40 legend has it that timing belt is still going
That's the supercharger belt.
It's the blower belt, timing chain is small and behind covers on them
Don't matter what belt it was, it still said.
"That is it!!!
I'm outter here..."
Or went like Cartman from South Park: "Screw you guys, I am going home!"
Attending my first event this weekend, do these blow ups happen pretty often?
We usually tape 40-60 sessions of pulling a year and these mishaps are from an entire season of events.
Can anyone tell me what the gas/liquid is that is being expelled from underneath the tractor/truck?
Usually oil or very rarely brake fluid or even fuel
Sorry I’m new to this .does the tractor pull the opposite way? (Or whatever is getting pulled)
The pulling sled increases weight the further it's pulled
The sled opposes the pull.
The trailer being pulled acts as a brake. The guy in the cab controls how fast the the weight moves forward and increases the pressure against the skids/brake on the bottom of the trailer. CZcams *smarter every day tractor pull* there's a great breakdown of how it works.
Here is some info on the puling sled (weight transfer machine).
czcams.com/video/J9SzYpgQJto/video.html
I do kinda wonder why they don't put more engineering into the front wheels. You've got like a 60 inch wheel on the back and probably like a dozen lugs for them and at the front, half of these things have the front wheels from a garbage bin mounted by like a spigot shaft.
I wonder what happens to the clutch plate😅
with the small one (single superchage v8) ca 90% of the times it's the front wheels that goes bye bye, you can say what you want, the big ones has a huge wariation of problems so betwin an engine fire and the front wheels braking i woill happyli take the later but steal i would have thought the have conected the dods and re-inforced those wheels
sweet video!
5:39 supercharger belt jumps off and runs away on the ground because of centrifugal force lol
I dont understand thiss. Why are the engines blowing up? Is the truck being pulled has brakes on or is it just really heavy?
The sled is very heavy as it goes down the track. To get momentum you need speed to get speed u need power ...LOTS OF IT
13:20 Geez, that's a MONSTER sized big block... 😳
I was thinking the same thing!
With every run you learn something. The one who learns the most wins.
You’d think that eventually they’ll figure out that those dinky little front wheels that look like they came off a lawn mower are just not gonna cut the mustard. 😔
Typically there isn't any issues with the "dink little front wheels". These are just the mishaps from a whole season. I have seen probably just has many bigger tractor tires have issues as much as the little ones.
Youd think that these professionals whove been doing it for decades would stop and ask you, a random person on youtube with zero knowledge, how to build their machines
Third one lost a tire but still had some in him!!!
those quadruple engine trucks confuse me, how the hell do you get power from all 4 equally without ripping everything apart?
Usually very time intensive and tricky calibration
Не там они тягаются,ой не там! В чистом поле,на заре,с плугом и пахать! И польза и проверка прочности сие чудо техники!!!
these trucks should come with an onboard fire suppression system. couldnt b that hard to put in.
"Ouch..."
I can't believe nobody saw the ghost 👻 at 9:03 lmao
I wouldn't be surprised if those big wheel ones give people concussions even with the helmets on. That looks rediculously painful to get tossed around in. Needs some kind of special 3d hans device.
8:13
Where was the sniper?
0:19 emagine me in my nissan skyline r34 doing a speed pull on the freeway
🤔кто нибудь вообще доехал то до финиша? Или все "крякнул"😊?
Some one needs to call a repairman
I don't understand the little dragster with the little wheels on the front. What the heck!?????
Has anyone else though what is would be like if one or these were brought to a drag strip?
They would probably do a decent standing quarter. Most of these would probably fall into the gasser category.
Holy tomatoes. Well honey I beat the last guy.
@3:10 "Is that a John Deere!?" No dude. Thats a John Moose.
Used to love mini mods. But they can’t handle the horsepower now.
They should run diesel in the tractors like they use too instead of alcohol and lower the rpm and they wouldn’t go kablooey
I pulled up for the kablooey man 😂
You want horsepower and rpm for the speed. They’re already carrying the front end so can’t put any more torque to the ground and once the sled tops out it’s gonna stop. So, gotta get it moving as fast as possible while you can.
A lot of these are diesel
Are they supposed to blow up?
These are mishaps from a whole season of filming. We probably tape between 1,000 and 1,500 passes a year, (maybe more). So blow ups don't happen every time.
First time I've watched this. I have never seen anything more American and I love it
So the tiny wheels are supposed to hold 4 engines?
Most of the time there are no issues even when they get a little wild.
For those who don't know, or are new to this channel, tractors aren't made for speed.
These are just the few mishaps that happen over an entire pulling season.
The lady at 2:45 looked like she cant even remember what year it is. She got done up James Bond style.
first thing to break on these small front tire units why use
05:38 Belt: _I go VRRRRRRRR_
When you all try to continue to go after the rig comes to a complete stop, is why the trucks blow up
“Now me and the and scientist gotta rip apart the block, and replace the piston rings you fried”
1:51 Man like; THIS YOURS 😅
Awesome 🔥🔥
Thanks!
no entiendo ponen tremendo motores y ponen rueditas delanteras de carritos??? 0:44
Just curious, but can anyone translate all of these mechanical failures into real dollars for repairs??
Ещё бы спереди колеса от самоката поставили)
Tractor Puller to insurance agent, "what do you mean that's not covered"?
It must cost a lot of money to repair or replace the engines
Never understood why some of these giant tractors have wimpy lawn mower wheels on the front.
Well that Chevy Silverado has no business being there it's a Mopar and John Deere tractor pulling the world
Not certain I get the point of the tiny front wheels. They are always broke, and not just in situations like these. Constantly the failure point in otherwise normal pulls.
As soon as they willie sh1t goes south lol
Yee Ha!
All the money invested in those rigs and they can't find it within their budget to beef up those front ends? Seems like many would have had it if the front end would hold up.
3:25 What happened?
Никогда не понимал смысла в этом шоу🤔
5:43 my people need me.
Poochie died on the way back to his home planet.
Just imagine the smells
The other one, though was the next ghost rider
Пацанов, на Камазах с Дакара туда надо, они бы показали как надо😅
@5:52, Say car RAMROD.