1996-2009 Chrysler, Dodge, Jeep, & Plymouth DIY Car Remote Programming - Easy to Follow Instructions

Sdílet
Vložit
  • čas přidán 11. 05. 2023
  • This is a walkthrough tutorial of the on-board pairing process for your new car key/remote and the following vehicles:
    1999 Chrysler 300
    2000 Chrysler 300
    2001 Chrysler 300
    2002 Chrysler 300
    2003 Chrysler 300
    2004 Chrysler 300
    1998 Chrysler Concorde
    1999 Chrysler Concorde
    2000 Chrysler Concorde
    2001 Chrysler Concorde
    2002 Chrysler Concorde
    2003 Chrysler Concorde
    2004 Chrysler Concorde
    1999 Chrysler LHS
    2000 Chrysler LHS
    2001 Chrysler Prowler
    2002 Chrysler Prowler
    2001 Chrysler PT Cruiser
    2002 Chrysler PT Cruiser
    2003 Chrysler PT Cruiser
    2004 Chrysler PT Cruiser
    2005 Chrysler PT Cruiser
    2001 Chrysler Sebring Sedan
    2002 Chrysler Sebring Sedan
    2003 Chrysler Sebring Sedan
    2004 Chrysler Sebring Sedan
    2005 Chrysler Sebring Sedan
    2006 Chrysler Sebring Sedan
    1996 Chrysler Town and Country
    1997 Chrysler Town and Country
    1998 Chrysler Town and Country
    1999 Chrysler Town and Country
    2000 Chrysler Town and Country
    2001 Chrysler Town and Country
    2002 Chrysler Town and Country
    2003 Chrysler Town and Country
    1996 Dodge Caravan
    1997 Dodge Caravan
    1998 Dodge Caravan
    1999 Dodge Caravan
    2000 Dodge Caravan
    2001 Dodge Caravan
    2002 Dodge Caravan
    2003 Dodge Caravan
    1999 Dodge Dakota
    2000 Dodge Dakota
    2001 Dodge Dakota
    2002 Dodge Dakota
    2003 Dodge Dakota
    2004 Dodge Dakota
    1999 Dodge Durango
    2000 Dodge Durango
    2001 Dodge Durango
    2002 Dodge Durango
    2003 Dodge Durango
    1996 Dodge Grand Caravan
    1997 Dodge Grand Caravan
    1999 Dodge Intrepid
    2000 Dodge Intrepid
    2001 Dodge Intrepid
    2002 Dodge Intrepid
    2003 Dodge Intrepid
    2004 Dodge Intrepid
    2000 Dodge Neon
    2001 Dodge Neon
    2002 Dodge Neon
    2003 Dodge Neon
    2004 Dodge Neon
    2005 Dodge Neon
    2006 Dodge Neon
    1999 Dodge Ram Pickup Truck
    2000 Dodge Ram Pickup Truck
    2001 Dodge Ram Pickup Truck
    2001 Dodge Stratus Sedan
    2002 Dodge Stratus Sedan
    2003 Dodge Stratus Sedan
    2004 Dodge Stratus Sedan
    2005 Dodge Stratus Sedan
    2006 Dodge Stratus Sedan
    2004 Dodge Viper
    2005 Dodge Viper
    2006 Dodge Viper
    2007 Dodge Viper
    2008 Dodge Viper
    2009 Dodge Viper
    2002 Jeep Liberty
    2003 Jeep Liberty
    2004 Jeep Liberty
    1999 Plymouth Prowler
    2000 Plymouth Prowler
    2001 Plymouth Prowler
    1999 Plymouth Voyager
    2000 Plymouth Voyager
    🔽 Here is a list of each step with helpful timestamps 🔽
    00:34 - Press the lock button five times at two second intervals to resynchronize the remote.
    00:49 - Insert key into the ignition switch.
    00:55 - Turn ignition to the run position (as far as you can go without cranking the engine).
    01:00 - Wait for ignition chimes to stop.
    01:04 - Using the working remote, press and hold the unlock button on the remote for four to ten seconds.
    01:13 - Within the specified four to ten seconds, continue pressing the unlock button and then press the panic button (on the programmed remote) for 1 second and release both buttons.
    01:22 - A chime will sound to indicate that the remote programming mode has been entered (allow three seconds for chime to sound).
    01:30 - Within 30 seconds of the chime, press and release the lock and unlock buttons simultaneously then press and release just the unlock button on the same remote.
    01:40 - A chime will sound indicating the remote has been programmed.
    01:45 -Press and release the lock and unlock buttons simultaneously and then press the unlock button on each new remote you wish to program at this time.
    01:54 - A chime will sound after each additional remote is programmed.
    02:02 - Turn the ignition off and remove the key. Test remotes.
    🛑 PLEASE NOTE -
    1. You must have one working remote to add one more to the system. If you do not have one working remote right now then these instructions will not work. You will have to have a locksmith or dealership use a computer to program the first remote for you.
    2. Most programming procedures are timed. Please verify the time limit in your manual before attempting this process.
    3. The key/remote and vehicle in this example may differ from yours and are used to illustrate the pairing steps you'll follow.
    ⭐Be sure to check out our website for affordable, high-quality car remotes and other Car Keys Express exclusive services!
    store.carkeysexpress.com/
    #Chrysler #Dodge #Jeep #Plymouth #CarKeysExpress #CarKeyReplacement #CarKey #CarRemote #Pairing #Programming #StepbyStepTutorial #VideoTutorial #Walkthrough
  • Auta a dopravní prostředky

Komentáře • 5

  • @mistysimco5608
    @mistysimco5608 Před 23 dny

    I only have two buttons on the remote. How do we do it without a panic button

  • @stepheneckles2345
    @stepheneckles2345 Před 8 měsíci +1

    Why does the picture on the video show a different fob the one showing is a Ram truck style

  • @maks.tardis8304
    @maks.tardis8304 Před 7 dny

    Ok but what if I don’t have the original remote?

  • @raybobo3109
    @raybobo3109 Před 6 měsíci

    my fob does NOT have panic button.

  • @joenorris7143
    @joenorris7143 Před 6 měsíci +2

    Talk too fast? Use next for each step, slow downnnnnnnnn