How I refurbish the screen on Dell xps13 9350 (Satisfaction) -relik18
Vložit
- čas přidán 25. 02. 2020
- This video is about Dell xps13 9350 screen refurbish. Crazy things im telling you -relik18
Sorry for the silence and muted sound but here is what is happening. Because i like music and i hear all the time, home, working place, while traveling, gym etc here is the problem to have a music as they say Copyright Claim even if the video is made in the middle of the sea and some boat approaching with music on it, the youtube hears the song and asks for copyright claim, not fair at all. For what reason they create the youtube when they do these kind of things pushing people way from music, this what i feel. im not DJ i dont make music. Anyways.
So here is a Dell screen panel No1 from costumer ( when we change to new sometime they give to us the broken or we pay them for ) in good condition but the lcd cable is damaged so i dont know if is working or what because i cant test, so im going to remove and also the exterior body is damaged in the corner. I found one more panel No2 from another costumer broken screen and lcd cable damaged but the exterior body is in good condition so im going to remove carefuly the broken glass and use it. The third top panel No3 again from another costumer is very bad damaged but the lcd cable is ok not tested yet, so lets start. Im going to test it later on.
Thanks for watching.
if you like the video please subscribe. - Věda a technologie
Great! This was what i was looking for. Lots of videos explaining how to remove and change the display assembly. But I only found yours about changing the display in the assembly itself. Thanks a lot! Gets my hopes up to repair the screen on my 9370. Hopefully its not too different.
Hi thanks good luck all the best
damn... I almost sawed my fingers off with that string...
Use hot gun for smoothing things and take care of your self
@@relik1877 hot air might do nothing, looked like siliconic adhesive to me. Clean and fresh iosopropanol didn't do anything either. The string was useful and used two tweezers to grab it eventually. Thanks for the upload!
I took apart my screen i didn't notice the string. Destroyed the basicscreen i took out. Wish i had seen this before i did it. Thankfully the hd screen is a lot more flexible so got it done second time around.
Excellent! Exactly what I was looking for... One question - is it 5mm double sided tape you used there to stick the digitiser back?
Hi thanks for watching.
If the house or screen has the old tape and it’s in good condition ( check how much remains or if is sticky enough) you don’t need anything else but if both sides are clear or new then choose one good tape 2-3 mm not thicker and not puffy if you understand what I mean, because the glass needs to stays under the frame so when the top attaches the palmrest everything is safe and not damaging. So good luck
Hi! Tanks for the nice video! I tok apart a 9370 screen, but it did not have the small wires to pull on. It had tabs connected to the dubble sided tape inside. They where easy to rip off, but I did get the screen out anyway. I changed to a ned screen cable, but I did not get rid of my problem. My problem is that a part of the screen is flickering, showing a darker part, and I can se that the picture is still there kind of, when I restart the computer. Its like the screen is part broken... It is the 4K screen, so it is expensive to replace.
What is the red tape you used? could you share the link for purchase?
Crazy beast my man