Jimny Manual locking hub conversion
Vložit
- čas přidán 1. 08. 2021
- This is only a rough guide. You can do it completely different if you wish.
This works for all sn413 Jimnys with vacuum operated hubs.
This setup is still holding up after numerous glass house mountain trips, cape York and Western Australia tracks. (20,000km)
Parts used are as follows:
-2x 26 spline manual hubs from a Sierra
-2x spacer rings. (These can be sourced easily online)
-4 paper gaskets for the mating surfaces
-12x longer bolts because you’re adding a plate in between. The original bolts won’t be long enough. You can measure this all up yourself.
-Optional but recommended gasket maker
Done!!!! Thankyou so much, works a treat :) Green light kept flashing when I had finished and I thought it hadn't fixed it, but 1min later stopped, solid light and all working as intended - maybe it needs to build up vacuum for a min to get positive reading ... Thanks again
Awesome mate. Very helpful about to do mine in a week or 2.
So easy to do and works great
I solved the problem of the 4x4 functioning by mounting the tyrex manual hubs instead of the automatic hubs that always gave problems in my 2001 Suzuki Jimny 4x4 with m13a motor and to replace the automatic hubs and overhaul the vacuum system for inserting the 4x4 I would have spent many euros between spare parts and labor! (greetings from Florence Italy!)
Hola muchísimas gracias por compartir tu vídeo lo e hecho en mi Jimmy y la luz deja de parpadear eres un máquina por cierto mi nombre es Carlos desde España un cordial saludo.
Interesante , ...resulta que he encontrado que los cubos de conexion electrica son menos fuertes que los manuales y que ademas tienden a pegarse en algun bache y suena metal . Buen dato . gracias
感恩了解，謝謝分享！
Instead of running 2 bolts in the lines and cable tying them closed, its easier to just do the u-bend on both sides and just kink the u-bend which seals it. Personally i think its easier.
Do you have to block the vac lines off or is that to just stop the 4x4 light flashing
awesome! are they compatible with jimny japan jb23 ?
There is a Brazilian type made named AVM or is it excellent
What type of grease do you recommend? I’ve just received new set of freewheeling hubs and was going to put them on soon.
Would these still work with wheel spacers?
what brand you use and where you buy it
Will it work on Jimny 5door 2023 model?
The light not working and not flashing what is the problem??!
How many mm is that spacer?
Hi I'm just about to do mine. It's a 2005 vvt push button model. If I do as you've done with the lines is that all I need to do? I don't need to short any wires or anything? Thank you 😁
Is applicable on the standard front axel? So no other mods are needed? Tx
Do you need the spacer rings I bought some but they didn’t come with any it’s for a 2002 model? Thanks.