Parallel Guide Surprise

Colin sent me a pair of Emily Adams parallel guide blocks that he 3d printed.
thesmartwoodshop.com

[@cbat09]

I'll buy two pair just to support Colin and Emily, and thank Ron for enabling the collaboration.

[@dsdragoon]

I'm interested in Colin's blocks, shortly after your video of building Emily Adams parallel guide blocks I bought two of those Festool Circle Guides then set them aside. Colin's blocks will inspire to finish that project.

[@clintpichon2361]

I would purchase a pair. Thanks Ron, Colin and Emily!

[@evadkin]

I am #55 in line to buy as well. Thanks for setting this up Ron, Emily and Colin, what a great collaboration.

[@woodbee9876]

Hi Ron, thank you for bringing this excellent focus to such a brilliant concept and repurpose of an existing tool by Emily Adams along with the improvement by Colin - both with very creative and innovative ideas. As with others, I too would be very much interested in purchasing a couple pairs of Colin's Parallel Printed blocks for Emily's version of the Parallel Track Saw Guides . Thank you again for all you bring to the woodworking community - so helpful, so generous...

[@gregoirerichard3677]

I’d be interessed in having the 3D file to print it myself. I would pay for it !

[@patmos72]

I'm interested. Thanks for sharing. You're the best Ron.

[@sahadevpy6948]

That's a great idea! I will buy a pair when they become available.

[@arthurwest2]

I would happily buy a pair!

[@uweschmidt157]

Colin and Emily should contact Fastcap. Why not manufacture the entire entire jig?

[@alita589]

FastCap is currently working with her on developing this product :)

[@davidmatke248]

@@alita589 that's great news. I'd definitely buy it from FastCap.

[@Scottyandkeeley]

I will definitely be down for ordering a set.

[@MovingToMnPro]

Colin should put them on Amazon and then you can add it to your store. Interesting!

[@kimbilton4928]

I would love to Buy a few sets.
Great ideas on your videos Ron

[@gerardoespinoza1205]

Awesome!! 👏🏼 thanks Paul

[@paulsullivan8172]

Ron, I have two of your workbenches and love the videos. I’m very interested in the new parallel blocks and purchase a set.

[@samkennedy841]

I’d love to have a set of these!

[@bloke875]

Absolutely great product. I’ll have two please

[@anthonybattista2355]

I would love a set of those blocks!

[@carlstone7035]

Absolutely! Go for it. Print the other part, too.

[@ParagonSound]

I too would purchase Colins product. Love 3d printer technology

[@denty32]

The power of CZcams, brilliant Ron

[@marklindemuth2958]

Great idea, I would buy at least one pair, maybe more.

[@garyrussell5373]

Yes, I want a pair.

[@jaywebb9973]

I would love to have a pair.

[@mikechouinard7688]

Yes! I’d absolutely buy a pair

[@MJCPeters]

I don't use Festool, but kudo's to Colin for great work, and of course Emily.

[@louisradosevich5148]

I would buy a pair

[@alita589]

Very cool!

[@stevekevan4489]

Ron, I am also all in. Would take a set.

[@corymcdaniel6253]

Would definitely be interested in a set especially if the modifications you made were in place so that they worked in accordance with the build video you did.

[@1larfinboy]

Would Colin be able to ship to UK

[@andylopez6037]

i would like to buy the 3D file so i can print them in Festool green! how about it?

[@marccrane4830]

Sounds like a great idea, I'm in if the price remains low enough...
Also, the 3d file should be available to someone willing to pay a high enough price
so they can print there own, someone who will be using them in a
full-on commercial environment.

[@westonlangford4164]

I would like them to be made ! Would be great addition to the shop

[@alanlindsay-ralph8232]

I'd be interested in a pair of these.

[@jamesboehm6166]

I absolutely want a set

[@growler1149]

I’d like to buy a pair 👍🏻awesome idea

[@everettandrews2469]

I'd pay for those....sign me up!

[@fregamin]

Yes, great idea.

[@patrickmurphy9152]

Great idea. I'm in!

[@cuttingedgehomerepair9905]

I'm all in on a pair

[@Gpaytonnh]

I’d buy a pair!

[@theautodriver4241]

Sounds like a good idea. Count me in.

[@williameagar7063]

Yes, willing to purchase 4 sets.

[@syssol2y]

Include me Colin. thanks Ron.

[@chrishorton2129]

I would love 2 pairs.

[@norbertotzelberger6773]

Germany require a pair of these blocks. I am very interested!

[@alexdoerofthings]

Interested here. For sure!

[@laylawicks5193]

Yes please can he ship to UK?

[@njt452fmsupertuner]

I WOULD BUY TWO SETS.

[@andycarson3341]

I would be interested in buying a pair.

[@charleyrobinson2146]

I would buy a pair for $10 if they were available. Great idea.

[@Chr1stopherScott]

I would definitely like at least 1 pair, probably 2

[@katabrontes]

I am based in UK but I would certainly like a pair of these. Is Karl planning to make the block for the other end as well to make a complete set? The Festool tape measure is available in UK for about £45 so the whole kit is a lot less expensive than several other " big brand" alternatives.

[@colinbrown6228]

Hi Michael, Your order is en route. I was able to provide a partial refund after finding a better shipping rate. Cheers!

[@rickherrick1732]

I would take a pair.

[@slw1977]

I’ll take a pair. Thanks

[@DaveMovold]

I'd buy a pair. :)

[@JRBardown]

Absolutely interested!

[@9282247]

I would like a pair.

[@dennisschulze439]

I'd like a pair

[@MaryJane-pz1cv]

Your the man!

[@peternelson9865]

Emily definitely deserves a royalty

[@martyvanord984]

Interesting, just a day ago,I was wondering why there is not a block that is made to fit the tracks as a kick off point for creating a parallel system.. MUCH NEEDED!!

[@jasonwiech5226]

I would line to have 2 pairs! Up here in Canada!

[@davidvickers3645]

A pair sent to the UK would be great. Fab use of a 3D printer.

[@bigdogmn73]

I'm in! I'll take 2 pairs!

[@TojoStup]

Definitely interested

[@Jhursh]

i would get a pair...

[@macrapidito1]

I’m in for a pair 👌🏻💪🏻😎

[@qp1pqp1pq]

I’m interested too.

[@jeffcase2318]

put me in for a few sets!!

[@maxbaender3986]

Also very interested. Has anything materialized out of this yet?

[@sandrapitt8115]

I would order a pair.

[@chippiegary605]

Definitely interested regards gary “ Uk “

[@connorh2004]

Yep. I'd buy

[@peterroberts7466]

Yes

[@michaelfate3249]

Yes, I’m interested

[@lawrencebeckner1097]

I want to buy some!

[@danbeeson9564]

I’ll buy them!

[@therealJohnAcree]

I'd take a pair if they go into production. Thanks

[@christopherhagan1581]

yep me to
!

[@sunogden6660]

i love it

[@plgard]

I'll take two pair.

[@eugenemclaren125]

Very interested

[@MaryJane-pz1cv]

I’m in for 4 pairs😳🤘

[@mikenmemorris9326]

Would be interested in the contact information for Colin and 3d printer blocks. Great videos as always....

[@howardbashinski]

Any action on this?

[@jhbproperties3232]

I will buy a pair

[@paulbuchan7502]

I am interested Ron.

[@richardmekolichick4326]

I'm in as well

[@jmkgm]

I’d definitely order

[@matthewmacgillavry7659]

Hello Ron, I would also be interested in buying a pair.

[@torstenhansen4308]

Interested in purchasing a pair or two.

[@johnviesta8019]

I want. Where can we send $?
Can we get an update

[@jeffgardner3227]

Will take 2 pair.

[@karlzipf6090]

i would order a pair

[@johnyhuh]

Count me in for two as well.

[@pascoagice]

I would buy some

[@simonliu5723]

Yes Please!

[@nestorguerrero6811]

I would definitely buy Ron.