Ford Focus RS Mk3 - My Modified AutoLok
Vložit
- čas přidán 18. 02. 2017
- Please Subscribe it's FREE you know :)
This is my modified AutoLok for my Ford Focus RS Mk3
I know it doesn't add that much more security but is a Visual Deterrent - Auta a dopravní prostředky
I wish I had those cup holders....We always get shafted across the pond. Nice car man.
Although you made this some time ago it is good to see the set up. It has helped me adapt one also for my ST3 which is the same as yours. Although its not a high security device it is indeed a visual deterrent and buys you time. The more you can add as a layer of security the longer it takes them to remove and that's more risk of being seen or caught. interested to see the next one you made if you still have it. anyway thanks for the upload :)
Nice idea
nice!
Thanks
Nice car man. Was just wondering where I could buy one of those locks and if it would work in any other stick shift/ handbrake lever, thanks
Hi, You can buy them from here www.autolok.co.uk/products/autolok-original but if won't look like mine, i modified mine to make it fit the RS
I was looking at getting one for my ST3 but it looks like i would have to do the same mod.
How did you modify it to fit. Need one for my RS as well..have disklok but wanted one..is it easy to modify
This lock was designed and made years ago(but can still buy) when handbrakes were behind the gear stick and hinges in the middle downwards to fit around the gear stick, with the mk3 handbrake being to oneside, it needs to hinge left/ right, the lock sides in and out with a number of holes along it to get the right length, underneath it there is a small screw, if the screw is removed the head sides off, this allows the head to be replaced at 90° to where it was, in doing so allows it now to hinge left/ right but a new hole will need to be drilled for the lock pin as the old ones will now be on the side, I welded all the old holes up, hope that helps
What do you call it ? It's useful dude !
Cant they just twist the shift knob off and slide it over the stick?
Hi, I have made a new one since this video and it clamps around the reverse collar
do you have video on that?
no didn't see the point in having 2 videos almost the same
Is it available in India
How did you modify it? it looks the same without the branding.
The one you buy only tilts up and down mine tilts to the left
RS Focus 435 if you don't mind me asking how did you modified it, have one myself and I don't think it will fit on the MG
It depends on where you gear stick is in relation to your hand brake, Underneath there is a small screw, if you remover that the end piece slides out and then can be put back in 90 degrees to its self meaning it now bends right and left instead of up and down , the difference with mine is i fully welded all the holes up and the slot down the back
RS Focus 435 thank you so much :)
On another note since i did this video i have completely remade it from scratch only keeping the tube that goes over the hand brake
It's not like you can unscrew the shifter, ho wait yes the shifter can be unscrew lol
How do you know from the outside? :P
I bet you unscrew the shifter and you take the bar off
mrdouble99 maybe but that's the risk they take