Biggest Gyroflow Tip! Caddx Walnut footage. REALLY GOOD!
Vložit
- čas přidán 15. 04. 2023
- No 1 tip to fix bad footage in Gyroflow. Add a gyro offset and it might solve all your problems.
Caddx Walnut: amzn.to/3zW4Ohl
Runcam Thumb Pro 4K: amzn.to/3GFnfuq
Caddx Peanut: amzn.to/41qsDJP
DJI Avata + flymore: amzn.to/3GEeOQ5
DJI FPV Controller v2: amzn.to/3KCcx96
DJI O3 Air Unit: amzn.to/3GGNm4l
GoPro 11 Mini: amzn.to/3MGTQ6X
GoPro 11 Black: amzn.to/41ubLSF
DJI Goggles v2: amzn.to/406fS63
DJI Googles 2: amzn.to/3mDHxgZ
Buy me a coffee: www.buymeacoffee.com/infinity...
Flywoo link: flywoo.net/?sca_ref=2907640.k...
DISCLAIMER: This video and description contain affiliate links, meaning I will receive a small commission if you click on one of the product links. This helps support this channel and allows me to continue to make videos like this. I appreciate your support!
╔════╡My Gear╞═════════════════════╡
║ ► DJI FPV Goggles - amzn.to/3NepEgg
║ ► FPV Goggles - Skyzone Cobra X V2 - amzn.to/3xEkwfA
║ ► FPV DJI HD - Nebula Pro - amzn.to/3N85lRx
║ ► FPV Drone - GEPRC CineLog35 HD - amzn.to/3HExMp1
║ ► FPV Drone - GepRC Smart 35 HD: amzn.to/3zP6JoY
║ ► FPV Drone - DJI FPV Racer - amzn.to/3b2lbQ6
║ ► Radio Controller - Radiomaster TX16S Mark II: amzn.to/3QtPDDf
║ ► Battery Charger - ToolkitRC M4Q: amzn.to/3HAEE6Q
║ ► Lipo Batteries - amzn.to/3xHQwzc
║ ► Camera Drone - Mavic Air 2S - amzn.to/3tN1aDS
║ ► DJI Controller - DJI Smart Controller/ RC Pro - amzn.to/3xJ4GA2
║ ► Drone backpack - PGYTECH OneMo - amzn.to/39CkaOx
║ ► Camera - DJI Osmo Pocket 2 Creator Combo: amzn.to/39yCSXr
║ ► Action Camera - Insta360 Go 2: amzn.to/3HGDy9M
║ ► Editing machine - Lenovo Legion 5 17.3": amzn.to/3xBW8v3
║ ► 3D Printer - amzn.to/3xIHDp6
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/3wa5iw9
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Biggest Gyroflow Tip! Caddx Walnut footage. REALLY GOOD!
#fpv #gyroflow #caddxwalnut #walnut #drone #drones #gopro #caddxwalnut
🔻
"Sappheiros - Dawn" is under a Creative Commons license (CC BY 3.0)
Music promoted by BreakingCopyright: bit.ly/2OBe00v
🔺 - Jak na to + styl
Thanks, fantastic demo!
Glad you liked it!
Very impressive!,once again proving you have a massive brain!
thanks man :)
Great video !!!
Thx man!
Thanks for the video! What is your process for multiple clips and gyro files of the same longer video taken with Walnut that splits it for safety? 1/ One way I see is to stabilize each file first with its individual gyro data file, and then stitch in something like Davinci Resolve. However, I'd imagine the transition between the stitched clips would be visible. 2/ Another way is to stitch the videos together, but then how to tie that with a single gyro data file?
PS Davinci takes a long time to re-render the long video combined from multiple pieces. Do you use some trick? It seems like all you need is just join them since Walnut split them before. I've see Losslesscut, but haven't tried it yet, seems like Davinci should be able to do this, but haven't found how.
Hy there the files that a split is a pretty standard thing with camera's. It's the file system they are using. There should be no visible split between the files.
What I do, I put each file through gyroflow one by one and the afterwards put them together in my editing software.
What if you turn ON LDC? There is not official lens profile for it :/ For 4K 60ps
I never tried that. Sadly, don't have the camera anymore
It's just a preset of settings. Turn Lens Correction Strength up or down depending on if you used LDC or not.
Mate I’m having an absolute nightmare with my Walnut 😢 I got it yesterday and it just doesn’t want to work, if it does record it stops after about 23 seconds, any help you could give me would be greatly appreciated my friend 🤝🤝🤝
Hey man, sorry to hear about your issues. My one had that same issue untill I updated the firmware and also fully chaged it. No my issues seem gone.
@@InfinityDrones so I watched your other video and also bought a new SD card, I just did a quick check and it let me record until I stopped it after a few minutes ✊✊✊ mate you are an absolute legend! This kit is so new but you are all over it already! 🔥🤝
One thing though is that it doesn’t seem to want to fully charge or I’m just not understanding the lights! I have a steady constant red light when charging but it doesn’t go out or change colour even if I Leave it on charge for hours, I’m charging from my computer 👍
Thanks again buddy 🙏
@@bugsy742 Awesome man! Loving the feedback! Thank you! With regards to your charging... try sharing with a decent 25 or more watt charger - PC USB charging standards are iffy at best.
By any chance could you tell me your settings in the caddx app and in gyroflow because my gyrodata doesnt look like yours
Do you eis enabled?
@@InfinityDrones what is eis?
and where is this setting?
@@hws02 have you downloaded the caddx app to your phone? Once you have it then you can access this setting from the list of stabilization options.
@@hws02 Electronic Image Stabilization