RunCam Thumb Pro 4k + Mobula8 (use gyroflow)

Sdílet
Vložit
  • čas přidán 18. 07. 2023
  • Mobula8 has plenty of power, so you can fly lightly even if you install RunCam Thumb Pro 4k.

Komentáře • 21

  • @gamingisnotacrime
    @gamingisnotacrime Před 3 měsíci

    what rates and expo you are using for throttle and other axises? can you share with your settings?

    • @ujiie123
      @ujiie123  Před 3 měsíci

      This video uses Gyroflow to correct shaking. The actual video is the FPV video below.
      czcams.com/video/ND0GxiNHjEg/video.html
      Betaflight rates are
      ROLL 2.23 (1115deg/s)
      PITCH 2.23 (1115deg/s)
      YAW 2.16 (897deg/s)
      Expo is a transmitter
      ROLL 60%
      PITCH 60%
      YAW 0%
      See the video below for settings
      czcams.com/video/4zLQrDHmWrs/video.html

  • @danielsandrone
    @danielsandrone Před 8 měsíci +1

    Poderia ajustar melhor a posição da camera...

  • @Kainos_FPV
    @Kainos_FPV Před rokem +1

    こんにちは
    ほぼ同じスペックのMeteor85 にただの RunCam Thumb 載せたんですがとても操縦しにくくなりました。
    トリックっぽいことして回転落とすとリカバリーが大変です。
    純正2枚ペラを(同ピッチの)3枚ペラに変えてみたら元気良くなりはしましたが頭でっかちのトルク不足に変わりなくって感じです。
    この動画を拝見すると余裕ありそうですね!?😀

    • @ujiie123
      @ujiie123  Před rokem +1

      コメントありがとうございます。
      Mobula8いいですよ、
      czcams.com/video/ND0GxiNHjEg/video.html
      これはFPVカメラの映像ですが後半を見てください、飛ばして楽しい機体ですよ。
      唯一の欠点は、飛行時間が短いことです。(2S 450mAh使用)

    • @Kainos_FPV
      @Kainos_FPV Před rokem +1

      同フライトのゴーグル映像ですね!ありがとうございます😃
      カメラ付けてのこの後半の飛行、これはどうも操縦スキルの差とも言えなくもないですね、未熟な私にはとても背面ゲートくぐりできるフィンガーテクニックはありませんので(笑、もっと頑張ります😅

  • @Raven-FPV
    @Raven-FPV Před měsícem

    Where to get the File for the canopy with Thumb pro mount please

    • @ujiie123
      @ujiie123  Před měsícem

      Please refer to the model data below.
      www.thingiverse.com/thing:6496289/files

  • @fpv_proximity_drone_freestyle
    @fpv_proximity_drone_freestyle Před 9 měsíci +1

    Nice dive

  • @bjalmoite
    @bjalmoite Před 9 měsíci +1

    What is your average flight time with runcamthumb pro mounted

    • @ujiie123
      @ujiie123  Před 9 měsíci +4

      Battery used and flight time.
      GNB 2S 450mAh 80c/160c : 2 minutes 30 seconds
      GNB 2S 550mAh 100c/200c: 4 minutes (recommended)
      (If you are cruising, the flight time will be doubled)

    • @bjalmoite
      @bjalmoite Před 9 měsíci +2

      @@ujiie123 thank you very much, i really appreciate it

    • @Raven-FPV
      @Raven-FPV Před měsícem

      Where can i find the srl for canopy pls

  • @haykokarapetyan2039
    @haykokarapetyan2039 Před 3 měsíci

    What rates do you recommend for smooth flying and cinematic indoor flights?

    • @ujiie123
      @ujiie123  Před 3 měsíci

      This video uses Gyroflow to correct shaking. The actual video is the FPV video below.
      czcams.com/video/ND0GxiNHjEg/video.html
      Betaflight rates are
      ROLL 2.23 (1115deg/s)
      PITCH 2.23 (1115deg/s)
      YAW 2.16 (897deg/s)
      Expo is a transmitter
      ROLL 60%
      PITCH 60%
      YAW 0%

    • @ujiie123
      @ujiie123  Před 3 měsíci

      See the video below for settings
      czcams.com/video/4zLQrDHmWrs/video.html

  • @jucaroni
    @jucaroni Před rokem +1

    Nice fly , it's possible stl mount please

    • @ujiie123
      @ujiie123  Před rokem +4

      thank you
      Below is the stl data of the camera mount.
      www.thingiverse.com/thing:6133749

    • @foxil4370
      @foxil4370 Před 10 měsíci

      @@ujiie123 hey Men, could you please tell me, which material is the best for printing such things ?

    • @ujiie123
      @ujiie123  Před 10 měsíci +1

      @@foxil4370 eSUN Flexible TPU