Motorcycle lift table homemade_video #2
Vložit
- čas přidán 16. 03. 2015
- Ponte solleva moto autocostruito, sistema a pantografo con azionamento a martinetto idraulico da 2 tonnellate.
misure : lunghezza 220 cm. / larghezza 69 cm. / altezza da terra min. 15 cm. max. 75 cm. / rampa per la salita 60 x 30 cm.
39725 - Auta a dopravní prostředky
Fantastico è il miglior sollevatore autocostruito fra quelli che ho avuto modo di vedere in rete. Complimenti al realizzatore.
ciao Giuseppe, grazie per i complimenti :))
Top shelf! Thank you for sharing! Excellent work and planning!
Hi Horatio, thanks :)
Great job. I like the stability, proper support and construction. Will surely follow your link for more details on how to make it..
This is very impressive. I've been looking at a lot of these, and this has better mechanisms for everything than any other I've seen. Well done.
Hi Brian, thanks :)
This is the nicest homemade lift that I've seen. Nice job.
safety catch is very clever
¡Te ha quedado muy bien ese elevador para moto!. Enhorabuena.
thanks :)
Top Shelf!!! Really enjoyed the video and your craftsmanship -Well Done!!! From Nova Scotia, Canada!!!
Hi Horatio, thanks very much :)
I love it.
Great job . . . kudos to the builder.
Hi Penny, thanks :)
I'm considering building a lift table and I've looking at different designs. I am very impressed with this table and will make mine like this. Thank you Paso for sharing.
Hi Bruce, I'm very happy to have inspired you with my work :)
Same here👍
You're a really valuable web video; could not make it without ya!
best DIY lift I have seen. Thanks for sharing.
Hi Belinda, thanks :)
Best video on CZcams for homemade lifts 😎
Hi boone, thanks :)
Great build. I am building an ATV lift and I'm using some of your design ideas. Thanks for sharing.
Hi Don Guptill thanks for your compliments, I'm happy to have stimulated your ideas with my project, best wishes for the build of your ATV lifter 👍
Si señor, un artista!!!
Hi Jose, thanks :)
Nice I would have liked to see the fabrication. I can figure it out though.
The part that empresses me the most is that it is not a sissor design.
Nice safety system. Great build. I think I am going to have to build one of these!
thanks for the compliments, I'm happy to have inspired you :)
If possible always try support the man and order one. Shipping doesn't cost that much.
Nice design!
Give us a bit by bit explanation of how you built this on as I would really like to do the same thanks 🙏
Very nice lift
complimenti ottima realizzazione
grazie Giovanni :)
Nice Job ,Well Thought Out !!!
Hi greg, thanks :)
Nice! Got some plans for this master piece? I need to modify for a Trike.
Great achievement, well thought out. Thank's.
Hi oldyoung, thanks :)
Goog job ! Greatings from Poland :)
Hi Siwek, thanks :)
Perfect...good job...
Hi Hotman, thanks :)
👍 dobar si
very well done
Ho risolto ,nn riuscivo a papire il funzionamento del pistone idraulico, poi ho capito che è lo stesso funzionamento di un crik . grazie mille x la tua disinibita. 👍👍👍👍
bene allora :)
Parabéns, ficou excelente.
thanks :)
Belíssimo trabalho parabéns 👏👏👏👏👏
thanks :)
ottimo lavoro, mostra nei dettagli del design. Mi piacerebbe sapere come riesci a scendere a bassa velocità a volte è necessario in base a ciò che hai sollevato grazie
Great job really
Love to have it 😊
Mick Cherki from Israel
Hi Mick, thanks very much :)
Perfeito!
Obrigado por compartilhar 👍
Complimenti!! Meglio che uno comprato in negozio.
grazie 1000 Simone :)
Very good job. Congratulations from France
Hi Jean-Alex, thanks very much :)
Congratulations. It looks very nice, thank you
Hi Jan, thanks :)
Hey Paso great job, do you sell the sell plans for this build?
Sir that sure is a fantastic job thanks for sharing. Do you have plans fort the build you share ?
Hi Jogo, thanks :)
look at this my other video that contains all the measures and details of construction of my motorcycle lift table, go to this link : czcams.com/video/pkmQatiNWCA/video.html
Incredible design. Not a single thing left out
thanks XJeep
And translation to english, love the tunes
That’s a great job
Is there a link to build it
Hi Jeremy thanks :)
I am Rehan .you are great
Hi Rehan, thanks :)
LaAssio ElKickeo.....love it!
Muito bom parabens
lut ! super !!
thanks :)
Could you make a blueprint pls. I want do it like you
if you made a blueprint please drop a link on description
Um bom trabalho !!!!
Thanks Luiz :)
Wha?
Nicely engineered...
Thanks Yves :)
Nice!!
thanks :)
Very nice.. Good job
Very well made 👍
Thank you Jeffrey 👍
El mejor que eh visto
thanks :)
Hola cuánto es el costo del plano lo quiero para Peru
Excellent bit of design and engineering ; )
I stand by my comment. It's an excellent bit of design and engineering. If you want to make one to suit yourself, then you can make it, "about 4 feet longer" and please post the vid for us to see ; )
@ Black Dog _ I don't understand what you mean, I no have problem getting my motorcycle up and down on this ramp ..
@ bachandefi _ thanks :) and I also approve your answer to Black Dog ;)
I like the way it just stacks against the wall when not in use too. Well done.
@ bachandefi _ thanks again :)
Nice job brother, how much in material?
Really nice job. This is must have for any garage. Would it be possible to share me a drawings, plans, detailed dimensions?
Hi Nenad thanks, I not have drawings or plans, but I have another video to all measurement to this motorcycle lift table here :
czcams.com/video/pkmQatiNWCA/video.html
and one image here :
farm3.staticflickr.com/2883/33737254836_31888ea534_o.jpg
so far nicest design I've seen.
thanks so much Patrick.. :)
Well thought out.
Hi Bob, thanks :)
What tune is this?
Thank you Mr. Kwan Admire
thanks Kwan :)
How much is price lift table in bangladesh
good job on thinking all of this through.
@ David McCormick, Hi, thanks :))
What is the music? Thanks!
На мой взгляд самая удачная конструкция. Ни чего лишнего. Всё просто и продумано. Можно чертёж с размерами?
привет Иван спасибо, за размеры этого стола для подъема мотоцикла смотрите это другое видео :
czcams.com/video/pkmQatiNWCA/video.html
Hey ho, tolle Umsetzung. Ich habe es mir da etwas einfacher gemacht und einen hydraulischen Hubtisch aus einem Krankenwagen / RTW als Motorradbühne umgebaut. Gruß
Nice work
Hi Rajesh, thanks :)
Iska .kimot .pile6 .7001516914
Big thanks for this videos and nice design
+Amanoula Mathurah
thanks :)
thought of another use for this thing you could lift heavy logs and beams / the work on a mill table and get shit done a lot easier.
Kon sa cylendar hai sir
great solution, btw what song/music is used in the video?
Hi whiskeythrottle, thanks, the music of video are the Win XP theme song.
Nice lift mate👍 does the slide mecanism for the safetystops work with the weight of the motorcycle?
Hi Kenneth, yes, the safety mechanism is kept blocked by the weight of the motorcycle it self and by the weight of the lifting table.
You need a wheel chuck and tie down loops for that.
Hi Andrew, already done :) watch my other video : czcams.com/video/kPtiZholY7An/video.htmld
and if you are interested, subscribe to my channel ;)
Gute Arbeit, schönes Video, sehr lehrreich und schöne Musik, was ist das für ein Album?
Danke Andreas, die musik ist win xp theme 👋
Nice 👌👌
Do you sell plans?
Lovely job guess wt my next project is lol
Hi Anthony, thanks :)
Meus parabéns
Kitne ki hai..
How much did it cost to make?
👍👍👍
Kaha milega sar
Muito bom esta rampa
@ alexandro mariano
muito obrigado :)
Price
I want one
Superbe!
thanks Jean-Michel :)
Can you explain in english
Ottimo lavoro, ti volevo chiedere info sul martinetto che hai utilizzato. Vedo che è un martinetto a bottiglia con il pistoncino perpendicolare al martinetto stesso.
Dove lo si può reperire?
Grazie.
grazie Davide, il martinetto che ho utilizzato l'ho preso da un sollevatore a carrello da pavimento, per intenderci da uno simile a questo :
cdn.manomano.com/sollevatore-idraulico-da-pavimento-3-tonnellate-rosso-P-334568-2516133_1.jpg
Kon sa haydolic hai
Veer ji price khatho mello gaa
WHIT THE LEVERAGE OF THE CYLINDER SET UP HOW MUCH CAN IT LIFT...MY GOLD WING IS 800 LBS DRY..
Hi, when I built this table in the testing phase I lifted four adult men, approximately 320 kg without any difficulty..
Sir want to purchase this
Price plz
is this the windows xp music?
Nice
Hi, thanks :)
Good concept but some of those welds make me very nervous about putting my motorbike on it.
Hi Wacko, I have lift four adult man in the test phase for a total weight of 340 kg, but I think the structure can lift a lot more .. I'm not afraid when I lift my motorcycle on it, the welds are ok..
Kitni ki hai
Спасибо!
Hi Йог, thanks :)
How the relief pressure is not displayed.
Hi Raficul, you can see the pressure release mechanism at 2:06 minute, it is shown with the hand then used with the foot as for normal working use
Very cool
Hi Den, thanks :)
I have watched your video many times but I still don't understand how does hydraulic mechanism works could you please put more detailed video or drawings of hydraulics, I know that it's. Floor jack but how does it help to rise and lower the lift
Please guide me _^_
Hi Workmen, see this my other video : czcams.com/video/pkmQatiNWCA/video.html Here you will find all the various measures and various details for the hydraulic mechanism..
The materials used are steel and mild steel for the upper plane.
Workmen V... Paso uses in mechanical terms a overdrivin first class lever. The hydraulic jack of course applies and significantly multiplies the effort.
www.teachengineering.org/lessons/view/cub_simp_machines_lesson03
Gostei mt . Por gentileza me envie as medidas. Parabéns e obrigado !!!
Hi, look this video here : czcams.com/video/pkmQatiNWCA/video.html