Ultimate DIY Motorcycle Lift Build
Vložit
- čas přidán 29. 01. 2023
- Link for the free plans:
ko-fi.com/s/0c1a19f822 / To get if for free type 0$ for the amount, or if you want to support me type in any amount you'd like to give. Thanks!
Feel free to share in it's original form.
Hey Guys! In this one I'm showing you how I've built a motorcycle workshop lift from scratch with only simple tools such as an angle grinder and stick welding machine. I really needed to upgrade my workshop and I the finished workshop lift table is a fantastic addition which I'll be using for a long time to come. This is the shortened version of the building video. If you want to watch the full length just go to my channel, you'll find it there. :)
Hope you all enjoyed the video, I think the finished lift / stand turned out fantastic and I'm sure gonna be using this for many builds to come.
Music provided by TheRelaxedMovement.
Check it out here: / therelaxedm. .
© Henry Keate t/a TheRelaxedMovement. All Rights Reserved
Link to the music: • 12 Hours of Free Backg... - Auta a dopravní prostředky
Check out some of my other content:
How to rebuild motorcycle forks: czcams.com/video/pc1C7UpXGY0/video.html
Or how I did a full teardown on the BMW R80 project: czcams.com/video/UYFOpLon8hY/video.html
It does make you appreciate the cost of a high quality motorcycle lift. Nice job.
Thanks a lot! Glad you liked it!🏍
GOOD JOB!
👍Many thanks for the plan
Many thanks for the plan !
First off great job man. This is by far the best and most efficient DIY lift table I’ve seen. Any chance you could make a video showing how the Jack attaches to the lift itself. Very interested in building my own, but need a bit more detail. Again amazing work.
Hello! Thanks very much for your kind comment! If you shoot me an e-mail I can reply with some photos or a short clip on the attachment of the jack. You can find my e-mail address on my about page. Or you can DM on instagram too, might be easier! Thanks again!🏍️
Хорошая идея, отличная реализация.
Respect, i would not trust my own welding. That is neatly done
Thanks very much! It’s been working wonderful ever since😎
Super super 👍👍👍
Selamlar süper bir yaratıçılık güzel olmuş elinize sağlık . Şemayı ve ölçüleri verse idiniz daha iyi olurdu
Very good work...
Thanks a lot!🏍️
Amazing Lift,
Very professional work,
What is the thickness of the profiles you used? 3mm or more?
Thank you.
Thanks very much for your kind comment!
The base of it was 4 or 5mm I think, but the only reason is that’s what I already had laying around. The legs and top part is 3mm. I think the lift benefits from the extra thickness because the base is a lot more heavy, but I’m sure it’d work just as well with 3mm.
@@volimoto thank you very much.
Hello friend. I watched the video you posted about building the jack for lifting a motorcycle, nice and professional work. I see that you have given the matter some thought. I am interested in making such a jack, did you also post the measurements?
Hello! Thanks for your kind words.
Yes, I have made a pdf with the plans, you can access it through my google docs, link is on the description of the video. Hope you’ll enjoy the work if you make one and that it’ll serve you well😊🏍
@@volimoto Thanks for your quick reply dear friend, I really appreciate it. It's nice of you to show other people how to make tools and all this for free. May God protect you. Thanks in advance.
GOOD JOB😮
What kind of jack is the one you used
I used an old 2 tonn car jack I had laying around. I think due to the angles you shouldn’t go below 2T, upping it a big could improve max height when loaded.
Hope this helps! Cheers!😎🏍️
Great work!
The only thing I didn't liked about this video is seeing you work on the ground like that.
I subscrided!
Thanks! Yes… didn’t really have a dedicated metal workshop area so did what I could. But the lift is for sure making my life a hell of a lot better at being able to work on bikes in a comfy position. :)