1/4 SCALE V8 Engine Gets TUBULAR Exhaust System!
Vložit
- čas přidán 3. 06. 2023
- Get the engine here➜ bit.ly/3YpMnfB
Exhaust System➜ tinyurl.com/3ufpe6m4
Other V8 engines ➜ bit.ly/3ErAduy
Stirlingkit Flash Deals ➜ bit.ly/3IafXig
---------------------------------------------------------------
ENJOMOR GS-V8 Engine Specifications:
Displacement: 78cc
Four-stroke
Bore: 22.9mm
Stroke: 20.00mm
DOHC
Maximum RPM: 9000rpm
Maximum Power: 3.8kw
Water cooled
Independent Lubrication (Oil Pump)
Electric Starter (Brushless Motor)
Electronic Ignition with Distributor
Spark Plug Type: ME8 with 1/4-32 Thread
Ignition Voltage: 10-12V
Starting Power: 24-48V Battery (I used 4s battery 14.8V)
Fuel: 95# Gasoline
Oil: 20W and above, Oil Volume: 50ml
Dimensions: 13.6 x 17.9 x 13.8cm
Weight: 4500g
-----------------------------------------------------------------------------------
►Subscribe! bit.ly/2m1d1y7
►Instagram: johnnyq_90
►Support my videos!: / johnnyq90 - Věda a technologie
Now it sounds like a full sized engine, I swear.
You can get the sound of a full size engine by carefully timed popping sounds too.
Imagine how it would sound with individual throttle bodies
You can get a full sized engine sound by placing pet water bottle inbetween bike fender and tire
lucky not a fully seized engine
@@dyllanneedham2087 Imagine how it would sound with superchargers
Now we need a video of a gearbox being made for that v8
Sounds like home-brew torque converter :D
Bolt it to a geo metro transmission
@@fry.master lmao
I thought the same haha!
Belt drive pulls on the back with a 90 into a clutch and a cvt to the rear axle you got yourself a one of a kind go kart engine that lrobsvly breaks down a lot lol
Boy, that thing has been a real pain to get up and running properly. But holy heck, does it sound fantastic now that you have it running right! I could just sit and listen to that thing run and be perfectly happy, lol....
Good to hear that the motor didn't get cooked when the water and oil pump wasn't running. Can't wait to see what you end up doing with it once you get all the bugs worked out.
The sound with the new muffler/exhaust is amazing.
That growl from such a small engine. Soo satisfying
Although I think it's neat that such an engine is available, there seems to be a lot of engineering fails with it out of the box. Perfect content for you! But I'd be upset if I bought one of these and had this many problems. Sounds great with the new headers though! Nice job
its chinese made. they dont care if it works :/
I believe the reason for slot of these fails is that these kits are usually sold to be a display piece, that can be capable of running, not as an actual motor designed to run, this why so much stuff usually has to be redesigned for it to run reliably, but I agree, for the price of it they should be designed much better
Especially since you can build an LS from junkyard parts for how much this thing costs.
if i bought a conley precision, and had these problems from the box... id track them down atnd throw it at them.
but for about 1/4 the price, one can expect dodgy crap from china.
@@paradiselost9946 what ever happened to Conley? I know they had a building fire but did they ever recover from that?
Bro.
You are killing it. Been following you for YEARS because of literally no one else putting in the effort(actually having the tools to do so as well) to make these crappy toy engines/models actually run.
Massive props and congrats on the subscriber boost lately!
im trying to give me some credit engineering is hard
Exhaust length and presence of crossover such as H or X pipe have a big effect on sound. It would be an amazing thing to experiment with tuning the exhaust to get different tones from the engine.
8 to 1
Could be, however the important part is trhowing away the gases to the the cylinders more cleaner, if we focused much into the sound some of the gas could be still stuck and mess the combustion, thats why most of perfomance/racing exaust pipes have bigger diameter, and the sound? Well is secondary.
Could be great if its try replic or make similar to the Ford GT40's exaust type, to start it simple.
I don't doubt that sir but the H and X pipe less effect on sound that's you think due to the fact that the header primary length is fixed in the and so is the engines firing interval. Those two factors didctate sound the most. H and X pipes are mostly for scavenging and balancing pressure differential of the exhaust between both cylinder banks. Messing with the header primary lengths, such as using unequal length headers, will have more impact on sound because you change the timing at which the exhaust pulses from the cylinders meet each other, and whether they collide or not. 180 degree headers would be a prime example of this.
Please make a miniature supercharger for this 😍😍
what, yet another centrifugal charger that cant possibly work?
Agree, would look sick with a blower on top 👌
@@paradiselost9946 it could work. At least for charger noise.
He's getting more and more precise with his machining and designing. He could make it happen.
The return of the machining ASMR king...
A V8 sounds great no matter the size. This is amazing!
Trick dad used to tune the collector length (1/4mi drag race) ... Make a crayon mark down the pipe, go make a pass down the lane, cut the pipe off where the crayon burned off.
Gotta upgrade from the double boggalator and get a 4 barrel for that beast
The fact that the "chainsaw" sound is gone makes it so much better. The headers definitely made it sound better. But the proof is in a possible "dyno" pull.
I bet with the better flowing exhausts it’ll run much better. But if you make multiple of different header diameters you can adjust how much torque, or how much power you want. That’s what they do in Indycar, and almost everything!
A rev limiter would be pretty cool to see on a small engine like this
Well alrighty then. I think I'm in love. That sounds fantastic! Love the headers and muffler combo. Looks fantastic and sounds even better. Would like to see you put it on your dyno set up and see how it preforms under a load. I am glad it is ok after the oil pump and water pump quit. Looking forward to seeing what you have planned next for this engine.
This channel is what got me into machining and making parts, I am still not very good at it and it was expensive to start out but it it really fun and I am glad I found this channel. Thank you
These videos are amazing! Can’t wait to see what you have planned for this monster.
Love the time and thought that you put into modifying the engine to make it work better. It now sounds a lot better and much more throaty than before. Look forward to see what other modifications you make to get it really humming.
Another fantastic update! This is starting to sound really good!
Nice work man, I love your builds.
That's really cool man - headers made big improvement & sounded excellent
That thing sounds sick! It surprised me how much the mufflers did, I kind of expected that they wouldn't make much difference.
That thing rips, could listen to that revving all day!!
Thats awesome!!! What should I do?
That's why i love headers! 😍 They transform any engine sound into a musical beast! 🤙
Saw the short of this engine and was waiting for this. sounds so damn good.
No thanks account made Yesterday to scam people
Great to see your back! I missed watching your videos for awhile! : >)
That sounds like a proper V8. Well done!
Such a nostalgic sound! Sounds just like the Monster Jams I would go to as a kid
Wow wow wow
It's honour to watch your videos free of cost
What a machine you made and what a sound
Hats off to you 💯✅🥂
Amazing transformation! Sounds great!
Absolutely amazing ...your work is high end!!!! Keeo it up!
Wonder how much difference individual throttle bodies would make
Runs so much smoother after those small changes.
sounds amazingly smooth
Amazing ! Holy Moly , Thank you for this Awesome Video !
This is the exact thing I dreamt of when I was a kid I wanted one of these on all my trucks and cars!!
I love how it sounds when it cranks
Love the sound of the new exhaust. Before, it sounded like a hot rod someone built in their shed. Now it sounds like a well-engineered machine.
You zoomed on that belt and heart dropped, "oh fuck" lol. Glad it's fine!
👍💪✌
Glad it didn't get damaged. Can't wait to hear it reach the 9000rpm.
Very nice engine sound, congrats
Amazing sound!!! Insane
that was a smooth start
nice smoooth running v8 thank you for sharing your content
Always a great day when we get a new vid
this is the best sounding rc car motor i ever heard
After binging the series, been waiting for this notification!
Very impressive. True craftsman,
Bravo that was spectacular!!!!!
That exhaust is cool.
That engine sound though..... 10/10 ❤❤😨😨
With the new exhaust the engine sounds much better. 👍
Nice, you should make a video in which you explain all machines and tools you use.
nice one. i need one of these on like a key ring or something so i could rev it up when im waiting for a bus and stuff like that. or just in the mornings to help me get up. i love it! its so cool 😄
You deserve a whole lot more renown for your work.
Night and day improvement!
The sound of the new exhaust system is 👌👌👌
Sounds like a mini old Mustang GT engine
What a dedicated 👏 that sound v8 really pay off.
The sound is amazing ❤
Sounds fantastic 👌🔥🔥🔥
much better with the mufflers hehe congrats, nice sound.
SOUNDS GREAT WITH THE NEW PIPES
Love the new exhaust system 👍🙂
Ok that little motor has no business sounding so good!
A couple things I love
It's quarter scale but sounds full sized
That muffler actually added throat to the note
The first time ive heard one of these things actually run and sound right!
Sounds great!
Do 8 into 1 collector. That would sound insane.
Sounds insane! 👍
I love watching your video's it's cool that you make your on parts for your RC YOU CAN make about anything you want to now you need to build you a RC car to put it in nice work.
great upgrades , sounds like a million bucks !
This is a Great Job!
The most adorable little growl, sounds awesome lol
it sounds perfect! that little idle is just too cool.
time for a little X pipe or something
Sounds like 2 and 6 are running lean. Thats the studder at about 2300rpm and the boggy 2 step after throttle release over 2300. Have a built lt1 that did the same thing. Lil port and polish and new rings fixed her up though. Bad little motor though. Sounds tuff!
That thing sounds like a 350 SBC, impressive!
Imagine if you make a 8 to 1 exhaust, that would sound magnificent!
This is incredible
It sounds so good
Incredibly Impressive!!
That is nuts!
We want to see a v8 powered rc truuck project next! I hope you give a thought to it and would start the project ! Awesome video!🤩🤩
5:27 That sound is just perfect!
Damn!!! Sounds awesome tho that thing is badass!
Som do motor crossplane é top demais!!
I'm trying to imagine a sequential F1 style exhaust on this thing, it would probably sound obscene. Great work Johnny! BTW I see an opportunity to add your own valve cover nameplates... Make it YOURS!
that new exhaust system sounds insane it sounds like you are hearing the engine from inside a car that’s really cool
Now you need to build ar RC drag rail or funny car for it!
Love you stuff brotha!
wow those are some nice 4-1 headers, really transformed the sound
those things are not cheap though ;o]
Looks perfectly to fit in a smart car)))) The V8 smart will 100% gain millions of views
This would be awesome in a big RC boat
Bro this is insane
open headers and the fixes made that sound great. maybe individual throttle bodies for this one?
show muito top esse motor depois da troca do silencioso ronco ficou bonito valeu abraço.
It definitely sounds like an American Muscle V-8. It makes beautiful music 🎶
So damn cool😮 can't stop thinkin of putting slt into a gokart🤯❤
Sounds GREAT
Sound so much smoother