HOW TO TURN OFF TRACTION CONTROL FOR BURNOUTS CHEVY (SILVERADO/TAHOE)
Vložit
- čas přidán 10. 09. 2019
- how to completely deactivate traction control on chevys this works on my 08 chevy tahoe so it should work for most similar years including silverados tahoes suburbans and similar models
- Zábava
Homeboy knows we getting made fun of 😂
I really like that it was very helpful
lifesaver! was stuck in mud last night and couldn’t get out because of traction control. I was so pissed and then watched this video and i got out with ease once i took the fuse out
Haha dange bro heck yea perfect timing glad the video helped you out 💯
Just take off the t/C 🤣🤦♂️
@@keepitthoro6768
What is the t/c?
@@Catholic1391 🤦♂️ traction control
I have no way of turning off tc on my truck..... Only way to not get stuck is 4wd low
So which abs fuse are you removing just 1? Is it #9,#59, or #61
Thanks broski, been a joke at the dirt track thanks to traction control. About to see how burnouts and donuts look on my 2011 chevy at the casino at 9:46 am before i go to the dirt again
Nice video bro. Thanks man
Tested it today on my 07 4.8 Silverado WT. Work's 100%. Great video. Thanks for letting us know.
07 Silverado and its fuse #10 called ABS 2.
How bout 2004?
@@albertquintero5412 yea what about a 2003
@@albertquintero5412 did you ever find out what fuse it was
@@rometorres1084 nope
Why not just pull the 60 amp and
Thanks for the tip💯👍
Awready I appreciate ya homie 💯, por si me dicen no quema I’ll show them que si 😂
I put a remote fuse holder and fuse taps and ran wires from one into the dash to a hidden toggle switch then you don’t have to pull the fuse you can flip the switch and light them up. Just be sure you put your remote fuse holder on the hot side in the fuse plug Then to the dash to your toggle switch and then back to the other side of the fuse socket. This way if something was to go wrong with the abs or one of your wires gets grounded out the fuse would still function as it should and not damage anything. I also did this on a little Ford transit connect so the stupid thing would go in the snow. The traction control was so bad it would completely cut the throttle every time a tire slipped and I couldn’t get a run and go to get up hills. Works great!
Oh hell yea thats a clever idea never really thought of it that way basically your creating your own traction control switch 🤔
@@hjttjh Well, you basically just remove the fuse tap the fuse location put a fuse of the same writing in the line anywhere’s close to the fuse box run the loop in through the dash and put a switch in line
Shawn, great mod. I'm going to do it.
Thanks.
@@hjttjh dont need one, if you dont know what he talkin about dont attemp, just pull the fuse ya plebb
Im gonna try this on my 15 Silverado for my gender reveal cool video bro thank u
Do I gotta turn off traction control and stabilitrak with the dash button too?
I tried it on my gmc sierra hd2500 2008 the lights doesnt show up do you have any idea why ?
My 4.3 burns out/peels out with traction control on image with it off 😭
If you have a 2006 gmc sierra, take out the tvs and abs, my truck has headers, cold air intake, and a tune and it rips like crazy
Do you know if you could do this with a Chevy avalanche 1500 2005
Same for 06 Chevy wt 2wd
A tune?
Wdym tvs
@@user-xh2ki2sd9b tcs my bad
Gotta love the old Tahoe
Can this work on my 2011 GMC Yukon
Is the same procedure is on the on a 2004 Nissan Titan LE cuz I cannot do a burnout
Que pasa si me machuco los dedos con el hood trying to remove the fuse??🤔🤔lol thanx compa! Saludos from southern califas!!
Does it work on 05 gmc Sierra hd2500 duramax?
(ABS) must stand for “ a brake stance” 😂😂👌🏾
This needs more likes😂
Hell yea bro gotta try it
Yes sir just remember be careful
Does this work on Cadillac Escalade year 2004??
Does it work on a GMC Sierra 2005 ?
Will this work with an 03?
Can I always run it with out the fuse or do I have to put it back
If you want the lights to go off, put it back. But if you dont care, send it.
I have a 2007 Chevy Silverado 1500 classic, which fuse would I have to pull to fully deactivate traction control
PS. All I could find was ABS 60 can someone tell if that’s the right one
Abs fuse, should only be one? If it were me thats what id do, recommend looking into it or just send it🤙😂
Yes it’s just the ABS FUSE
I tried to take the abs control of from the hook fuse box but I didn’t find it , I have a 2021 Silverado trail boss , can you help
I’m really not familiar with the new new models I know the newer they are the more restricted they are with burnouts and ect but lemme research on them and I’ll let you know if I find any useful info
if i remove the fuse does it affect the AWD?
I'm sure it does. Probably not a good idea on AWD as all those systems work together to determine what wheel gets what power.
Hey I wonder if you can permanently leave the fuse off like that not for burnouts just to stop having tranction control problem or stability control problems
Wondering tha same thing, have u tried it?
It might be dangerous to drive it like that
I’ve been driving like that since I got it and only problem is the dash lights never go away but I just recently put the fuse back cause I’m in the city now
Do you have to put the fulls back on
yes, when you done offroading or doing donuts, just put the fuse back on to where it was
can you drive it on a everyday basis not abusing it ? with out the fuse in
Yes sir
Stabiltrak and traction control keeps coming on I have an 07 Chevy Tahoe , if I take the fuse out will this help me out ?
Taking the fuse out will solve that problem
My stabiltrak messed up on me again then I remembered this video & took the fuse out I just drove it home cause all the lights were on I didn’t know if I took out the fuse if it would permanently damage my stabiltrak and traction control cause those have been giving me hella problems so idk if I can drive without that fuse forever lmao
@@leannesalazar3162 eh who needs that stuff anyways
What about my 2002 chevy tahoe 5.3 it won't do a burnout I've tried only when I'm turning and punch it never does it when I want it to
Same 😂😂😂
Mine 01 5.3 Chevy Silverado wouldn’t do a burnout gas brake just won’t spin em at all and it’s a 4x4 Should I take the fuse out
Grasias compa
Ya dijo Viejon
Would this work on my 2008 awd escalade?
One more question how did u find it easiest to change spark plug 8 did u remove the tire and reach in
You need a flexible ratchet extension bro .
I never have to take the wheels off .
I have a 2008 gmc sierra 1500
2000 gmc sierra 2500
And a 2006 yukon Denali I always do it my self
My 13 gmc I just put a plug socket on the plug then used a short 3/4 socket no extension and easily removed it from the top, just be careful putting the plug in, make sure you can spin it in by hand at least a few turns before you put a wrench to it. Easy to cross thread
2005 silverado doesn’t have the traction control button if I remove the fuse would it work?
I don’t think it will because it doesn’t come equipped with the traction control or stabilatrac
I got a 2005 5.3 tahoe stock and won’t do a brake stand would I need to take out the ABS fuse or just a tune
Look for an ABS fuse under the hood remove it and give it a try if it works then bingo but if not then a tuner might just be enough to do the job just make sure the tuner matches your vehicles specs
Hey I have a question I did it and brake light came on and abs is that normal when taking off the fuse?
Nvm I rewatch your video lol thanks for the video
Would it work for 2004 chevy trailblazer
My cadillac have a stabilitrak problem lost power if i remove the abs fuse did gonna resolve the problem? Thanks you!
He said chevy try there
Can you do this with a Chevy avalanche 2005.?
Ltz Tahoe’s come w the posi rear end 🙌🏼
Will this work on a 2004 suburban
Would hp tuners delete that?
Will a 2001 silverado have a fuse even tho I dont have a button
Did you find anything out? I have a 2001 as well
@@danielsklogsv2327 I never found anything out did you?? All I heard them say is the old ones dont have traction control and that it's a differential thing
@@brutallyhonest6103 yeah they don’t have traction control
When I take out the fuse the abs light comes on but the I P brake light also comes on is that normal?
Yea it does it to mine too
I ls swaped my 69 c10 with a 6.0lq4 with a 4l80e and with a differential of a differential of 03 suburban with 4.73 and idk if it’s to heavy or what but my shit won’t do a burnout already took pressure out the brakes had it tuned and everything I might just sell this piece of junk or what can I do? Help please
3.73 gear******
How do I get mine to do a burnout mine is a 2002 Tahoe
Facts I need to know to
Will this work on a 2015
Buenas yotengo ese problema del ABS puedo quitar ese fucible
I tired vato, and it dosent burn out in a break stand, it what do you think is happening ?
It could be a difference in gear ratios in the rear end bro my tahoe has the hefty 3.73 gears
anybody have any tips for chevy blazer 1999
I have a 2010 tahoe ppv with a chapacabra cam, ls7 lifters, pushrods etc, headers and tune.....and still no burn out. No traction control button!!!!!HELP!!!!
Ooo idk what that could be then maybe rear end idk tbh
Thx
Aye was yours 2wd or 4x4? Having a hard time doing burnouts in the 4x4 in 2wd mode
@@JayyMoney-vr7nv 2wd
When i put the fuse back in will all those lights turn off? On the dash
Yes they should all turn off
I was wondering the same thing
What about for 2000 Chevy Silverado 1500
Clamp the rear brake line
Yoo I have a 2008 Cadillac it’s awd I always wanted my shit to do a burnout with that 6.2 but shit I don’t know if this would work with my Cadillac
If it’s awd it won’t work
Can i run it like that all the time with out doing burnouts just normal drive wold it affect on breaking or something
Yes you can just be very careful in the rain or snow ice conditions because it will loose control very easy so definitely if weather conditions are bad I’d suggest to put it back on but if it’s a dry day you can definitely leave it off
Yeah, you can run a toggle switch to that fuse spot and run it in line switch and put the switch in the cab.
My 2010 Chevy Silverado's Stabilitrak warning light came on, truck went into limp mode. Plugged it in and the code said, Throttle/Pedal position sensor. I replaced it and 3 days later, it came back on again. The code said the same thing. Can I take the number 9 fuse out and drive it at regular speed until I can get it to a mechanic?
I wouldn’t know tbh if that would work
@@DMND90s update. It is working so far. No issues driving. It's temporary until this weekend when I can get it fixed. Thanks for the reply. I appreciate it.
Broke my driveshaft cuz of this vid
Lmao be careful next time
Anybody know how to do this on the sierra AT4 2019 couldn’t find the same fuse
I try and do research on that truck but I think that truck has no problem ripping up the tires on its own with just switching traction off
What about a 2003 Yukon
Hey bro i baught a 2010 tahoe state police vehicle and theres no button like urs to torn it on or off ..its my first chevy idk if it on or off ..or if i can buy the button / trim and maybe there is a wire behind there to plug it into ..idk im lost
is there any buttons to off traction control of gmc denali 2011, i tried alot
Yes there should be it should be in center area consol it looks like a car with squiggly lines
Same for a 2000 Tahoe??? Lmk
for my moms avalanche you just click the button and it shows the triangle for traction control off
Hello my friend I have sim problems in chaverlat avalanche 2007please replay
Will it fix my issue with my tahoe not wanting to go above 4000 rmp when i floor it? I vant even do a high rev to hear how cool it actually sounds it pisses me off
I don’t see why it would have a rev limiter the only times it would limit the rev if it’s in park
Probably turned on v4
Will the lights on the dash go away when you put the fuse back in ?
Yes
On most car I buy I pull the abs fuse bc it give better braking , better performance and driving control. No down shift or up shift from computers interruption once u pull the fuse.
Do you ride with it daily without the fuse ?
@@nate3633 yes, I have a fusion that I run without the abs fuse bc they have brakes problem and brake normal and perform fast.....brakes works perfect without abs fuse its just allow u to stop quicker ......with abs in control the car will stop base on the abs module
Now this here is a smart guy. Wait till a wet day and bye bye fusion.
@@mgmcgregorross69 lol I know it's not the best thing to do for wet condition once u drive legal speed and drive smart in wet condition your good with or without abs , I had a Corolla 2001 which don't doesn't have abs was scary when brake in wet condition I almost slide in a other vehicle but once u know your vehicle u should be safe... And drive 4 vehicle distance from other vehicle is perfect.
Same vehicle just got 4x4 imma check it out 😅
It should work as long as ur 4x4 isn’t engaged
@@DMND90s nah it doesn’t work so it should, it’s stuck on 2wd
@@ryandobbins4699 did it work? Mine is 4x4 as well
@@jonathanholguin9623 yea it does bro
How can I turn off T/C ON MY 2005 2005 gmc 1500
2WD
Does it have a traction control button on your dash ?
A friend did this on his 2013 Tahoe and works flawlessly. Which year was yours again?
Glad to hear that lol and mines an 08
Does it have it off all the time
If you take them out any chance of getting into a car accident or causing any damage to
The car
yes take it out and your gonna crash
Si Chema cuh!
Has anyone tried this on an obs?
What ab 2001 Chevy Tahoe it’s only showing on fuse for abs and it’s 60a
Nvm I wasn’t looking at it upside down😂
Was
Is your Tahoe stock. I have a 08 Avalanche Ltz and it don’t burnout for shit
Yes stock
I havea 2013 Chevy Tahoe LTZ what year is your?
Mines a 2009
Me pasó eso ahora con mi troca de que salí del trabajo y pase el speed bump mas o menos recio y que se me prende el traction control y el abs y no quería correr recio nomás me dejaba asta 40 y no savia por que y me fui así corriéndola x un rato asta que me paré aver si podía ver que era lo que podía ser y le desconecté la batería y se le quitó y ya corrió bien y llegue a la casa y ya me iba a hir aser un mandado y que se le prende otra ves el traction nomas el abs ya no me apareció y me pare otra ves y la apagué y se le quitó y luego me lo volvió aser otra ves como dos ves asta que la apague y la movie a la batería y se le quitó y orita ya no me a salido otra ves nomas que tengo miedo que me prenda otra ves y no se que pueda ser el problemas 08 Chevrolet Silverado
Misfire
What can I do by a gmc 2008 that I can drive faster then 100 mph
Tune it with a hand held tuner Diablo or edge
Doesn’t work in 03 5.3 Tahoe I get all the dash lights but no burnout 😢🥺I wanna do fun stuff too!!!!
Turn off trac and stabilize first, press trac button (1 time) to turn of trac control, press and hold for 5+ sec to turn of stability, then proceed to remove fuse
No trac control buttons, 🤔just 4x4 pannel
Do you know what will work on a 03??
Revin it and dropping it in gear lol na Jk
What fuse is for a 2002 gmc Yukon?
Hmmm I’m not sure for those year models they actually might not have traction control
Would this work for a 2004 5.3 Chevy Silverado?
Does your truck come equipped with traction control button
@@DMND90s no😭
@@DMND90s can you still do burnouts even if there’s no traction button?
Does it work for a 2004 tahoe 5.3??
1 first gear turn off traction control an 🌪💨
@@alexmoro9095 i tried by pushing the button but no luck also im kinda scared to burn the tranny and rear end
Im wondering if it works for cadillac escalade 2008
It should same platform
Does the trick on my 2007 escalade
Anybody know the exact fuse for the 99-02 Silverado’s ?
No
Fuse labeled Abs 2
Then you don't have to take the fuse out the fuses in line when he hit the switch. So you leave the switch on 247. And when you burn out you're from the switch off
How do u get the lights off the dash
I think they stay on while fuse is removed but once fuse is installed back they go away
DMND90s thanks man I like yours mines badass I’ll do a video of mine tomorrow and tell u when it’s updated
@@russlorson5004 hell yea bro for sure
Does this work for a yukon Denali too ? Let me know I wanna try it out
What year is it
If its the same year style as mine then it should work just find the same fuse as I show in the video
Would this work on a awd Yukon Denali??
Go pull it and find out
Then let us know so i can do it 😂😂
do you know how to remove the governor ?
Most tunes will solve that preferably dyno tune and a good 2 piece drive shaft
Will it work on a avalanche
👀 yo im trynna see that but yeah it would work since the avalanches are rwd
I tried it on my 2013 Texas edition gmc
Did it work?
does this work on an 01 single cab?
As long as it has traction control idk if that year model did doe
How do u do a burnout on a 2001 burnout!?
Have you figured it out been trying on my truck
@@rometorres1084 have you?