Uh Oh! We Get A Comeback!
Vložit
- čas přidán 27. 03. 2024
- In a previous video several weeks ago • '15 Jeep Patriot - Cra... I had a look at this Jeep and supposedly "fix it." Well guess what. I was wrong and now it's in my lap again to find out what is really wrong with it.
-Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/stores/the-sma-...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/SouthMainAuto
The South Main Auto Amazon Store:
www.amazon.com/shop/southmain...
AES Wave Automotive Diagnostic Tools: www.aeswave.com/cart.php?m=af...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained. - Auta a dopravní prostředky
Comebacks are the real teacher. Hits you right in the pocketbook and the reputation--two things that mean ALL for a small shop. Fixin' and teaching Eric, you're doing a great service for all us who learn from it-professional and otherwise.
and it doesnt matter how good you are, every now and then, one is going to bite ya in the rear.
It won’t hit your reputation at all if you handle it properly. Even the best mechanics in the world get comebacks.
If you never had a comeback you're probably not producing.
@@gimmeaford9454 no doubt. Each time is an opportunity to shine (or not) by the way it is handled. Good shops, and good customers understand this.
The most common statement of vehicle mechanics. "Man I really hate cars!" lol
The same can be said of IT guys. But about computers.
I've said that more than 1 time lol. It's how it is . 🍺🍺
It’s always better when you repeat it. 😂😂😂
Same can be said of Appliance Techs.
Car mechanic and it guy are completely different. Unless your talking about a part changer
Awesome . To see an expert in his field admit he made a mistake is proof of an honest man. My hats off to you Mr. O You're that guy !
It must be satisfying to know that your customers trust you to repair a comeback fault, and not go to another shop instead.
Of course the customer comes back, the previous repair was guaranteed and thus the whole repair in this episode is free now (except of the 30 bucks relay).
Who paid the tow truck
@ mark, the OTHER shops are ALL bringing their difficult repairs to SMA 🇺🇸🗽🍶👌
@@pz6316The customer pays the tow truck. That's why warranties are called limited warranties, otherwise Eric would be paying the customer for lost wages, pain and suffering and punitive damages.
Enough to drive you crazy!
That repair was totally legit. Another example of excellent diagnosis.
Absolutely! Intermittent electrical issues are a challenge, even for the best mechanics.
I had a feeling that jeep would be back ! Its a jeep thing ! 😝
don't insult real jeeps like that. :D
@@johnhufnagelThey are all made by Chrysler, doesn’t matter!
It’s an automobile thing
@@SteelheadTed Or even worse they're all FIATs!
Jeep yup junk they are
If you made some green crusty hunter t, T-shirts I would be down for one 😂 Another great sleuth hunting success.
SMA shirts with Crusty Green Huntin' Machine or with any of Eric's double entendre's or other funny asides during diagnosis would be awesome!
Yes!
The classic reach around
Amazing how Eric goes to the immense extra trouble of giving us clear camera views, and explanations, so we can follow this easily
BOB = NOT "Battery Operated Boyfriend" 🤣
Which is your phone...😅😅😅
Does this mean then that an ATM= titless teller?
I just come here for the humor and hope a car gets fixed at the same time. 🤣🤣
After working on computer for 60+ years, I can attest to the fact. Most people do not understand the frustration one feels when working on an intermittent. For me it started in 1963 and was still true 2 weeks ago. 😠 I'm hanging it up now at 80 years old. No more 'friends and family' repairs. Good luck to you. Enjoy your videos.
I guess I’ve got three years to go .
Man oh mam Eric just keeps digging till he gets that green gopher .
Just wanted to stop in here and say thank you for all your content. I used your GM truck guide to change the 5.3 in my Yukon. I watched all four videos and it really helped me. It started up without a hitch.
I have used a 12 volt truck low air buzzer or piezo buzzer instead of a test light so I could move a harness or wiring when looking for opens and issues, while not having to watch a test light ,just listen for the beep while touching components. Great work once again Eric !!
Solid idea!
Awesome idea!
Yes M2!
"You know what we need to do with that one, (grabs relay)we need to set it over there" as he chucks it across the room...😆
That was great!
Another guy on CZcams yells “Pile!” as he does that.
Yeah just had to laughffff
Been watching for years now. I turned this on and my 9 month old son smiles and watches it everytime now. Keep up the good work!
Start'em young!
@@Cybersawz Bullshit !
Now that's a very solid, old-school diag done with no scan tool---love it
These are the best videos. My wife spit out her coffee when she heard BOB battery operated boyfriend. She’s still laughing. But these electrical problems are the best
Had that exact same thing happen on my '08. Luckily, I guess, I had pulled the whole from clip off earlier looking to install fog lights. I had taken the cover off and pulled a relay looking for power sources, and the jeep quit, no crank, no start. Put it back together and it worked. A year or 2 later, when the exact same symptoms occurred, I remembered the relay box. Yep, corroded pin. What a stupid place to put an electrical component. When I had the clip off earlier, I noticed how much mud and dirt were stuck in the corners. Started a yearly routine of removing the front clip in the summer and washing out all the dirt and debris. Now if I had only known about Fluid Film then. Oh well. Thanks for the channel and the content. I'm about 45min from where you are and I can relate to the weather and vehicle conditions.
My daughter has a 2011 dodge caravan that does this. then when you jump it ( but only with a jump box) im assuming it sets the relay and it starts. at least now I have a place to start to check before we buy a TIPM. chrysler vehicles !!!!
I had an 08 Caliber that was the exact same issue. First problem was an intermittent mil with a cooling fan code. Several months later I finally found the relay box corrosion . This car was towed in with a no crank no start. Got off the ramp truck and started up. Damn. Super frustrating.
Electrical corrosion makes a lot of headaches for the owner and the mechanics who have to find the problem.
I would say most would never find that intermitten green crusty problem. Eric, you're a true pro!
I've used hot glue to hold pins in place
Yep, me too. Works great.
I like this.
Yep, especially the black version used on dent pull tabs. Seems to stick to the plastic better.
Now this was a great video.
Thanks for bringing us along!! You da man, Mr. O!
The older I get, the more I miss my ‘55 Chevy when I see stuff like that. Thankfully, the wife’s 2017 Volvo at 70,000 miles has been dead reliable and not reliably dead.
My dad taught me a lot in the ‘50’s and ‘60’s, but this “improved, complicated modern technology” would have driven him nuts…as it does me. I will never complain about ‘50 and ‘60 era, British, Lucas electric components again.
For someone who does his own maintenance, you’re an inspiration.
Ah…. The “take care of your wife “ reminder. Smart man.
I suspect that was Mrs. O's doing
She is a beautiful/ wonderful/ caring woman. Better take care of her as she does to him....of course nobody ever claimed Mr. O ignores his bride.
@@applianceman6194 He'd better, otherwise BOB might enter the picture... 🫢😁
You are the man Eric I'm retired automotive mechanic I love your videos an diagnostic ❤
You are the man Eric I'm RETARDED automotive mechanic I love your videos an diagnostic
Gotta love the fact you made this video and not hid the fact that comebacks occasionally happen. Cars are a pain in the butt when it's internment problems .keep up the great videos and repairs
how about a comeback from the misuse of an improper tool that damaged and smashed other pricey parts that were nearly new (a mere 3 months old and cost +400$)
Have seen that happen, someone was testing out a power probe and pushed the button while on the wrong connector. OOPs.
"Recalls", as we call them in the appliance industry, is a sad fact of being a Tech...no matter how good you are. Sometimes junk is junk.
If you ever encounter something like this, keep the wire in place with RTV, it can be removed relatively easy, it's weatherproof, it holds good tension...:)
Rtv itself is corrosive
Don't beat urself up, Eric. The green weenies are the devil.
You saved the customer some money on a NEW box and a big headache wirin all that back together AND did the nice thing by leavin a note for any future folks who might be pokin around down there.
AND... this was a TOTALLY proper way to go about the repair in this particular situation.
Keep em comin and HAPPY EASTER to you and Mrs. O. 👍😎
Lol - 'Son of a frig hole'.
Just got to love the invented curse words Eric!
Several years ago I pulled a front tire and fender liner and worked on corroded wires on my wife's 2012 Patriot. Then a couple years ago it cost me $3000 to have the rotted whole rear end replaced. Then a year after that the shiftless transmission died. We've had two Jeeps. No more.
Damn you like sticking your finger in the power socket doing it twice to prove it kicks?
WOW!!! I am so glad we don’t have to deal with corrosion like that here in Florida… we just have alligators and hurricanes 🤣🤣🤣
A man willing to admit and broadcast a comeback on CZcams for his fans. That shows Eric is the real deal. He’s a technician we all want to be. One of the best problem solver and logical thinking technician out there.
Most mechanics would keep throwing random parts at it until they bankrupted their client without ever arriving at a fix.
Troubleshooting is an art.
That seems pretty clean for a 2015 in upstate New York! Don't worry about it too much, you got it fixed now. I feel like that design is built to fail, with jumpers between relays though. I always like your explanation of the fault, the diagnosis, and the repair.
probly wash it all the time like my bronco sport bene 2 winters and the only real rust starting is on the muffler i try to wash it alot tho
Not a "Comeback." This is a "Customer Returned For Continue Diagnoses". Hard to find a problem when it starts working properly last visit. I had many customer state "worked good for days", but I should have known that. Good job finding problem and economical repair. Keep up the great videos and work. Thanks for sharing.
Phew!!! BEAUTIFUL!!!
I've used a dab of gorilla glue at the crimp to hold the pins in place without issue of removing the relays on ATV boxes...
Noticed the note on the wall: “take care of my wife”.
Nothing like a cup of coffee a donut and an SMA video at 6:00 am in the morning.
This year is my 56th year in the electrical game and I can tell you that an intermittent fault is any technicians nightmare.
The clipboard returns! I was worried Mrs O grabbed it. 😊 Thanks for the video!
As an Electrical Engineer and former Electronics Tech, I always say "intermittent failures are the bane of my existence". But, I learn something every time I find and correct one. Keep up the good work, Mr. O. Your troubleshooting skills never fail to impress.
Hey I’m wondering would corrosion cause an intermittent misfire only when the engine is warm? Found corrosion on the terminals connecting to the coil from the ignition module of an older distributor setup and hoping that’s the source of my issue
@@mrsemifixit I am not a mechanic, but in my opinion, it's possible. When things get warm, they expand, and I have seen that cause issues. The clock in my 2005 Corolla would only display the time when it was cold (under 25 degrees F) outside. Using freeze spray, I was able to isolate it to a thermally intermittent diode. I replaced the diode, and it has worked ever since. The corrosion would cause a poor connection, and if it expands, it could make the connection worse. I will leave the rest up to this more experienced in ignition system diagnosis.
Sometimes using a buzzer instead of a test lamp can be advantageous when you are diagnosing a component at the other end of the vehicle.
I used to have so much trouble understanding those wireing diagrams. But after watching your videos, it all makes sense now. Thank you
Thanks for the video Eric.
As a tech myself I know how humbling comebacks can be. Hold your head up high and keep swinging. No one is perfect and hindsight is 20/20 but there is knowlage that is gained in moments like these. Thanks for the videos and keep up the good work
Always great to watch you logically with through an issue.
Eric April fools are still a few days away 😅
Great job 👍
Watching your videos helped me diagnose the faulty trailer wiring on my step dad’s 03 Chevy truck. It was actually “just a fuse” which is the mechanics dream job.
I struggle so much learning electric but your recent videos have been helping me quite a bit! Thank you so much 🙏🏼🙏🏼🙏🏼
Great job locating the faulty electrical contact. And another good 'McGyver' repair.
Nice find, Must feel great knowing you found and repaired the issue
Even as a comeback, I'd gladly pay you for that exact repair. That harness will probably last longer than the undercarriage.
I really like your attention to detail, and your concern for others that may work on a vehicle after you!
A whole lot of patience good tools and electrical diagrams . GOOD JOB!
Man no matter what may ever come back , you are good at what you do . for sure
Hi Eric, I hope the owner of this vehicle is watching, you just went way Above and beyond for them and did an outstanding job for them! You should be proud of yourself Eric! Its no wonder you have people coming out of the woodwork to get to your shop and have the job done right! Good Man!
outstanding - well done Eric!
we all make mistakes or miss something in life, all good! Thanks for having a video that shows us this, you are real.
Thanks for showing us the ones that didn’t work out as well. Much respect for your talent and your character.
Always learning from you,Thank you
Another fine repair there Eric. The love note for any future tech just proves your a professional.
This is exactly why your customers come back to SMA!! You Take care of them as it should be. As the Old saying goes, if you don't take care of your customers..... Someone Else Will!!!! Nicely done EO. Probably will take this HEEP right to the JUNK PILE, If the FRAME don't ROT beforehand! 🤷♂...
The tech school says join the exciting world of vehicle maintenance. 🤣
You have a great deal of patience and excellent knowledge of troubleshooting
Eric
Great job!!
What pain 😅😮
Greg from Minnesota
Great video Eric, we all get a boomerang job every now and then it's par for the course, At least you admitted it and you recorded the fix, not many you-tube channels would have been so honest, all the best from the UK 👍
Wish we had a mechanic like you where I live nice job
Great job, Eric! I too was fooled by the LED changing intensity and thought you had an intermittent ground somewhere. It's most satisfying to know you found the real culprit 🙂
Great Video ! Use Ge Clear Silicone 2 for a Less permanent cavity filler than 5 minute epoxy. turns to Clear hard rubber. still holds. but can be picked out & removed. where 5 min epoxy is permanent. i think you will like it. Great sealer to keep the green crustys away & Hold stuff in place. Ge clear silicone 2 can be had at home depot paint section. Clear = Hard clear rubber. Black & White much softer. Great video !
This was a great lesson to learn. Thanks Eric
You are a hell of a mechanic, very impressive.
That one pin is why I go straight to the relay anytime an ASD code pops up, or a no crank condition gets towed in, or the cooling fans stop working.
Another repair option could have been to open up the case a bit more so the female blade terminal slipped completely through. Then splice the 2 existing jumper wires to a 6" piece of new wire. Pass that up and through the block and connect to the relay terminal before you install the relay in the block. Then feed the wire back down through the block and install the relay. That way, if someone does pull the relay in the future, the terminal attached to pin 1 comes out with it and they recognize that special care is needed.
You definitely narrowed that right down Good job. Love the video.
I wish Eric was in my town, I can't find good masters of mechanics that really know their work. Hats off to you Eric.
I wish I could find a mechanic with your knowledge and ability in Albuquerque.
As always, great job Mr. O.
Eric , thank you for keeping it real and being honest, showing us that things can be over looked. And the most important part is to dig in deeper find the problem , fix it and make it right. I really appreciate that about you. Tank you Eric and THUMBS UP!!!! 👍💯
Much respect for an honorable man. Mr O, the model of intelligence and integrity. Keep on rocking brother.
So much for the phrase "Green Means Go". Congrats on thinking ahead (also) to label that relay.
Not only is that community upstate lucky to have you but all of us on the internet who learn from these videos . It’s tough to work on all models and be able to do it successfully like your shop . So much respect for people like you . There’s no life lines when it’s your shop like working at a dealer where a job might have a Foreman etc . SMA top notch
Fantastic find. Thanks!
You’re one great troubleshooter. Sometimes those corrosion issues sneak up on you especially when they’re intermittent.
I remember several years ago Eric was interviewed by a local news publication where he lives. He said, "We've all done dumb things. If someone hasn't done dumb things they haven't done anything at all." It really is refreshing to see him make a mistake every once and a while. GREAT VIDEO!
You're a good man Eric, how many guys would show a comeback like this? Really helps out the average Joe!
Jeep will make you work for free sometimes. Good stuff thanks for taking the time to video your diagnostic methods.
Up in Canada we run into corrosion problems constantly.I find your videos interesting and even though I have close to 50 years in the trade I often learn new procedures or short cuts quite often from other techs.Keep up the good work
HI , your electrical troubleshooting ability is OUTSTANDING . I have an ELECTRICAL ENGINEERING BSEE and you got this stuff down.
It takes a REAL HONEST MAN to due a video on a comeback.
Keep these videos coming.
HAPPY EASTER
Outstanding video, Eric! I fought a similar problem on one of our multi million dollar air defence systems. The green crusties mixed with fan blown dust was packed between two relay pins. Depending on humidity, the relay appeared engaged even when not commanded. replacing the relay was a non-fix. The sun came out later in the day and all is well! Next morning with the dew point up and now she's broke again. I fought that bugger for dang near two weeks.
The pain, the shame, the comeback! Good video!
Sometimes there are comebacks. We try to avoid them but it happens. You found the problem and it's fixed. Good one Mr. O!
When it comes to epoxy-based relay/fusebox repairs, I was taught to lightly grease the terminals, then plug them in to maintain the correct pin location. Then just turn the box over and glop in the epoxy. It'll hold the connector in the box, but the grease prevents it from messing with the relay or fuse, so they're still replaceable.
I just watch for the reactions you give. Brings back the old days of working at the Chevy garage.
Love how you admit you made a mistake. Takes a real man in this day and time. You are a great teacher! Hope the family is well.
No he admitted to being wrong. His task was to repair the car. He sent it out running. No mistakes were made he just couldn't finish his diagnosis last time because the vehicle fixed itself.
You hit it out of the park again Eric. Great troubleshooting video
The way that engine is rapping your repair will long outlast the vehicle.😂
You are a very competent and ethical tech. It's especially beneficial for learning when you discuss our thoughts as you do the troubleshooting. I also admire you lack of swear words as you do each step and the car tries to bite you. I'm also non-plussed by the Chrysler engineering staff that located that junction box so low where it can be so easily exposed to weather.
Great repair!!
I've done that with my snowmobile..
I stuck a sta con in a spare factory fuse holder to power my heated shield..
Well done. The best repair and the appropriate repair aren't necessarily the same answer. Good call.
I have bags of those relays more than happy to send them your way for your next adventure
Good Job on the come back
Good find and job. You just proved why that customer felt you were still the man for the job.
Hate to have a come back, You did the right thing, great video. Thanks
A few zaps with your small tip solderng iron could of tightened it up--- so glad you thought of it. Mr, Magoo Milo, Maine PTL