Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
Однако, как он смело работает в перчатках и подхватывает и протирает вращающиеся детали. А если накрутит на вал руку? Это же наверняка хорошие перчатки из прочного материала, а не из гнилья какого- нибудь! Я конечно понимаю опыт мастера, но все-таки ...
За то что мужик старается, ему респект! А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine. doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
This is artistry at its best. The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results. So amazing. Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤ Thank you 🙏 for the sheer joy in watching this magical act.
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
saw a bunch of lathe and drill press work, which a child can do , and very little of anything else. Was kind of hoping that at least the tonearm would show the bearings used and how they are fitted. the drive belt is a particularly difficult item for most manufacturers , so I would have liked to see that, along with the motor, platter main bearing , structural supports, etc. and a picture of the thing at the beginning, so I would know what I am looking at instead of just a tour through the machine shop.
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
Как токарь с более 60 Летним опытом работы Челове сделавший подобное 50 лет назад Могу сказать что данный " предмет " стоит не Больше материала на него Затраченного !!! Необходимой точности Поверхностей нет , вращающие детали не Балансированы , пары Подшипников скольжения Из под резца? Это не изделие точной Механики , это ТРАКТОР !!!!!!
Хай-энд продается задорого не из-за звука и характеристик, а часто из-за необычного внешнего вида, эксклюзивности, необычной философии, экзотики. Кто в это верит - тот платит ). Справедливости ради, стоит сказать, что многие из использованных узлов явно сделаны на станках ЧПУ. И подшипниковый узел тоже не на коленке, как минимум..
@@kubancossack8496 А Хай-Энд это и есть чисто внешнее оформление. С параметрами он не связан. Выше хай-фая по характеристикам на сей момент ничего не существует.
Процесс изготовления продукта ручной работы удевляет мастерство специалиста. Но цена LP ? От стоимости продукта 50% надо заплатить за работу мастеру, 25% стоимость картриджа и остальным должны довольствоваться компани за все ихние хлотаты (сырьё, издержки, налоги, прибыль и т.д.) LP наберает обороты среди любителей качественной музыки. Таких специалистов надо уважать!
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
Does an iron magnetized disk rotate under a cartridge? 17:07 is this how "rigid" a vertical alignment is? I would say that's a Chinese "hi-end" rather than a high-end of a healthy person.
Seriously over the top. That said by a man that was heavily into audiophile equipment and recordings during the 70's and 80's. What a beautiful piece of work...a masterful blend of the art of science and engineering.
What about the "needle drop" at 17:10? Look and sound fake to you? That record is filthy and should be popping. Not one bit of surface noise. The needle (stylus) is still not even settled into a groove when the music starts. And the music starts during the lead in.
@@hyperluminalreality1 👍with you 100%. I noticed that music started while needle was still in lead in track. But it didn't register in front of mind...I was still dazzled by the bling of the machine. I couldn't catch the piece of music off the label. Wouldn't be surprised if not the same piece as video sound track. Still quite the machine.
I have no clue about audio technology and must say that I'm very impressed by the accuracy and skills of the master
@@hyperluminalreality1 it's a video - the person used the music for effect, agree it would have been better if they used the actual music from the record player. you'll also notice they cut into a later part of the track, that's way farther in the record than the 10 seconds that have elapsed in the video
류대표님 반갑습니다
대표님이 만드신 턴테이블 사용 잘하고 있습니다
훌륭합니다
우리나라에 이런 장인분이 있다는데 큰 자랑입니다
First of all, love, then desire, skills, tools and resources. There is no failure, in the hands of a master every gramophone will see the light of day. Excellent!!!
When I start watching this video,I watch it all the way to the end.This man is master of engineering, beautifully craftsmen in turntable.
Приятно смотреть на работу.
amazingly hand build from the ground up by himself, he got my respect.
Больше похоже на самоделку. Техника безопасности на станке отсутствует лезть руками в перчатке во вращающийся патрон шпинделя на 10:21 и особенно на 11:13, аж нехорошо стало. Затяжка винта 13:51 вообще порадовала. Кругом "тяп-ляп"' и как вишенка на торте - болтающийся тонарм на 14:45, 17:07 и чудовищный перекос иглы на 17:10 которая скоро крякнет на таком проигрывателе.
Всё для развода лохов, которые до сих пор считают, что просветлённый мастер и сопли девственниц могут больше чем прецизионные станки с ЧПУ.
P.S.
В догонку. На 0:11 нормальная такая шербина под тонармом. Не выбрасывать же! И так сойдёт!!
Тоже удивился тонарму и кривизне головы
Так захватывало дух, что чуть не задохнулся. Это нечто!!!!!!!
Однако, как он смело работает в перчатках и подхватывает и протирает вращающиеся детали. А если накрутит на вал руку? Это же наверняка хорошие перчатки из прочного материала, а не из гнилья какого- нибудь! Я конечно понимаю опыт мастера, но все-таки ...
Very nice to add the strobe markings on the platter. ALL hi-end tables should have them!
That's amazing !
офигеть, это целый станок получился.
A very stylish player
The combination of carbon and steel is brilliant.
Makes me want to get one of these.
I bet it not affordable for main of us...
@@mari0auseva That's for sure Mario .
This is what you can call a record player...fabolous work!
Nunca Ví algo asi. Que nivel de excelencia. Saludos desde Guatemala
За то что мужик старается, ему респект!
А так это просто самоделка на шестидесятилетних станках с низким классом точности и с большим влиянием человеческого фактора, интересно за какие деньги фанаты LP покупают эти поделки!?
Лох не мамонт, лох не вымрет. Легенду про мастера постигшего дзен в горах Тибета и про смазку для проводов из соплей девственниц и жабьей мочи в полнолуние расскажут и лох расстанется с лишними дензнаками с чувством полного удовлетворения.
Правда что ли?) И как же в данном случае человеческий фактор и класс станков может повлиять на конечный результат?
A skilled craftsman can compensate for a worn machine , this is not aerospace machining , it just probably costs like it is. After viewing the video, I know nothing about the design principles. For all I know it could be a guy with a machine shop saw a picture of a fancy looking turntable and imitated the looks, because about all I saw was rudimentary machine tools . I would have enjoyed a more complete production, that included how some of the universal design problems were addressed by this machine.
doesn't;t really matter to me, I am not in the market , and I'm sure they have many happy customers
Uau!!! Isso não é um toca-discos. É uma obra de arte 😊 👏🏼👏🏼👏🏼👏🏼👏🏼
loved how he made each piece and how he made the tone arm that was fascinating ,I am well assured that turntable was very expensive to buy by a yahoo like me
Have a good day. God bless everyone.
и цена как у самолета.... ЧПУ сделал бы и точнее, и быстрее, и лучше...
This is artistry at its best.
The aesthetics. The design. The skill. The quality. The desire to achieve. The passion to get results.
So amazing.
Sadly I just returned from Seoul else I would have visited the factory and even bought one ❤
Thank you 🙏 for the sheer joy in watching this magical act.
what we really need are new Lathe Cutting machines. Everyone is using the old lathe machines.
What we need is money to buy them. Anyway the work gets done right? 😎
Some of the best lathes, mills, etc are the old ones. Build so robust. Machines from the 40's and 50's where built to last forever.
@@xtrck yes, but they are hard to find and some are not in working conditions.
Amazing how talented some people are.
Nothing better then hand made
This is no exception to the rule
A true master
Costruirsi le cose da se, non ha prezzo. Bravissimo.
That is just brilliant engineering - love the way everything is hand torqued thanks for sharing 👏🏻👏🏻👍🏻
Did he torque, or tighten? A micro torque wrench would add to the craftsmanship. measured correct torque on every fastener. Admittedly unnecessary, like the fake needle drop at 17:10. That record is covered in debris as can be seen. Not one pop and zero surface noise. The music starts when the stylus is still settling into the lead in groove also.
В ж... станки, с програмным управлением. Вот до революционные - это класс!😂
Как видимо счастлив этот дядька...
A good job of a Мaster for joy...
Simply amazing what a work of art
알루미늄 주물가공 플레터라 드릴작업하니 부스러지면서 깍이네요..^^
저도 제품 사용자지만 제품의 장단점이 있습니다.
아쉽지만 가내수공업 이상 발전하긴 힘들다고 봅니다.
Piece of art !!!!! BRAVO
у меня упала челюсть .вы большой молодец отличная и красивая работа.
Круто, настоящий мастер.
Now that is a phonograph. Great job!
Absolutely amazing! I couldn't take my eyes off it.
Me either. I agree on the hand craftsmanship. That is why the needle drop at 17:10 is so disappointing. The music starts when the needle is still settling into the lead in groove. The record is absolutely filthy and there is zero surface noise or pops. Not the real time audio.
Nice craftsmanship that has resulted in a cool record player, worthy of admiration
Amazing skills another lost art
Ну токарь и фрезеровщик знатный!😉
Excellent Engineering, womderful longlife a unique product in the field of music.
Well, it's just music. It's worthy of a museum.
Flawless in every move.
INCREIBLE FELICITACIONES A ESTE ARTESANO DESDE CHILE MARAVILLOSO
This was absolutely outstanding
What a beautiful pice of art wish I could afford one
maitre de la hifi fait main !!! bravo !!! superbe travaille !!!
Istne dzieło sztuki. Mógłbym godzinami przesiadywać i patrzeć na niego, jak działa, jest cudny. To była uczta dla oczu jak Pan budował ten gramofon. Chyle czoła przed Panem.
3:10 탭핑 오일을 뿌리시면서 뚫으세요
탭핑 오일이 없으면 찌꺼기가 많이 붙고 발열이 심해지고 구멍 주변 부분이 파손됩니다
Μπράβο-μπράβο!!! πολύ καλή δουλειά, very-very good video bravo!!! fantastic. From Athens Greece (🇬🇷)
Мастер. Здоровья тебе, человек
Фантастика! 👍 👍 👍
Respect from India excellent
Вот это красота! Щидевр!👏
Sure beats the Fisher Price record player I had as a kid.
saw a bunch of lathe and drill press work, which a child can do , and very little of anything else. Was kind of hoping that at least the tonearm would show the bearings used and how they are fitted. the drive belt is a particularly difficult item for most manufacturers , so I would have liked to see that, along with the motor, platter main bearing , structural supports, etc. and a picture of the thing at the beginning, so I would know what I am looking at instead of just a tour through the machine shop.
great craftman
Гений.
Beautiful craftsmanship.
Really? Are you a machinist or a toolmaker?
In some ways this guy is a butcher.
This is coming from a fifty year precision machinist/toolmaker.
quelle beauté , du grand art
merci pour la musique ....thank you for the music ....
Monstrueusement magnifique !!!!!
Só a agulha desse Turntable Master já é uma dificuldade pra comprar.
que dimais.muito proficional caramba.muito lindo parabéns.amei valeu abraços sucésso..
Great craftsmanship.... but too high end for me , I'll just continue to use my 1960's magnavox...
All the amazing engineering they did was it to much to ask the editor to have the music come in once the needle was off the lead in track
대단하십니다
καταπληκτικό!! μεθοδικότητα απο την αρχη μεχρι τελος!!
Nice mechanical design, but I would prefer direct drive with feedback balanced needle system.
Amazing and Incredible! 😲
Красиво и навороченно. Но с точки зрения профи по расточной и фрезерной обработки данный диск имеет дисбаланс. Обкатка центрального отверстия не выдерживает критики, где стойка, где индикатор? Далее четыре отверстия сделаны на,, шармака,, без зацентровки из под сверла. Центровать нужно обязательно, сверло точно уведет в любом рандомном направлении, и лучше потом калибровать отверстия. На предприятии за это точно возврат отк, это в лучшем случае по Н15 и ниже. И конечно должна быть шлифовка поверхностей
Да, как токарь в давнем прошлом тоже могу к ста нюансам придраться. Хотя там только токарка и есть. Ну а фрезеровка вся заказная, видимо, на чпу. С технической и технологической точки зрения - прошлый век. Но сама ручная работа завораживает.
I'm no audiophile, however I do love my LPs and I found myself holding my breath, in awe, at times.
The needle drop at 17:10 is fake.The music starts when the stylus is still settling into the lead in groove. No surface noise on an absolutely filthy record either. That is not music off vinyl. Bad editing and nobody seems to notice or care.
A master piece turntable wow
Как токарь с более 60
Летним опытом работы
Челове сделавший подобное 50 лет назад
Могу сказать что данный
" предмет " стоит не
Больше материала на него
Затраченного !!!
Необходимой точности
Поверхностей нет , вращающие детали не
Балансированы , пары
Подшипников скольжения
Из под резца?
Это не изделие точной
Механики , это
ТРАКТОР !!!!!!
Я тоже не понял почему он не балансировал диск?? Чтобы красоту не испортить? 😂😂😂😂 а цену в раиси попросят миллион за него))
Хай-энд продается задорого не из-за звука и характеристик, а часто из-за необычного внешнего вида, эксклюзивности, необычной философии, экзотики. Кто в это верит - тот платит ). Справедливости ради, стоит сказать, что многие из использованных узлов явно сделаны на станках ЧПУ. И подшипниковый узел тоже не на коленке, как минимум..
Сняли с языка
@@kubancossack8496 А Хай-Энд это и есть чисто внешнее оформление. С параметрами он не связан. Выше хай-фая по характеристикам на сей момент ничего не существует.
Делали на заказ для Дмитрия Анатолича нашего, так сказать, Медведева. Тонкого знатока и ценителя.
개멋있다!
Marvelous! Thank you.
아이리스 잘 사용하고 있습니다
Провода в тонарме без экрана или мне показалось?
He is living my dream life.Having a over the top stereo system and making turntables for a living.Omg what a life
Процесс изготовления продукта ручной работы удевляет мастерство специалиста. Но цена LP ? От стоимости продукта 50% надо заплатить за работу мастеру, 25% стоимость картриджа и остальным должны довольствоваться компани за все ихние хлотаты (сырьё, издержки, налоги, прибыль и т.д.)
LP наберает обороты среди любителей качественной музыки. Таких специалистов надо уважать!
Красная цена подобной конструкции 100$.
Is it just me but at 17:10 was the cartridge out of parallel to the record surface and did it not jump further out of alignment as it hit the run-in groove?
Superb!!! I wish I can afford to buy one.
awesome
Sehr schöner Plattenspieler. Jedoch kann ich nicht verstehen, wieso man bei einem so schweren Plattenteller kein invertiertes Tellerlager anwendet??🙄🙄🙄 Viele Grüsse aus Germany
Pure joy to watch
magnifico.perfeito.parabéns..valeu.
it's perfect.
Obra maestra sin duda
Heavy machine ! Excellent
Учитесь, работал 17 минут, а заработал 100k USD
Thankyou. Wonderfull.
Mind boggling
Una obra de arte 👌
perfect👍👍👍
He’s not a craftsman he’s a genius
Nice video, keep it up, thanks :)
👍💯
Вы маэстро 👏👏👏👍👍👍
WOW!
Техника безопасности отсутствует, нельзя на токарном станке работать в перчатках😮
До чего же круто! Невозможно оторваться от просмотра.
Does an iron magnetized disk rotate under a cartridge? 17:07 is this how "rigid" a vertical alignment is? I would say that's a Chinese "hi-end" rather than a high-end of a healthy person.
The turntable, tonearm, transformer, amp, cartridge and cables are sold separately and if you have to ask, you can't afford it!
Massimo from Italy . Beautiful ! A true work of art! Is the arm unipivot? Compliments !
одноопорный тонарм, лучшее из решений!
Thank you.
Genialidade a flor da pele