1000 Polaris General 2016 Clutch Kit install - EPI Performance

Sdílet
Vložit
  • čas přidán 11. 09. 2024

Komentáře • 12

  • @mesochiefy72
    @mesochiefy72 Před 4 lety

    Your video is so clear and informative. Clear fluent english thumbs up to the camera guy and camera. So helpful thank you very much.

    • @EPIperformance
      @EPIperformance  Před 4 lety +1

      Thanks Jay! We sure aren't Hollywood lol but we do our best to help people out.

  • @jamesscherck6155
    @jamesscherck6155 Před 6 lety

    Why didn't you put the new kit in?

    • @EPIperformance
      @EPIperformance  Před 6 lety

      Hello. We mainly do the videos inbetween our test runs. Sometimes it depends on the test schedule and if we have the production or prototype parts. The main goal is to show people how to service the clutches. Also sometimes we don't want our trade secrets out in the open for all of our competitors.

  • @tkalmi09
    @tkalmi09 Před 8 lety

    how do u hold the secondary clutch from spinning to torque it

    • @EPIperformance
      @EPIperformance  Před 8 lety

      You can try holding it by hand but the easiest way I found it to stick a larger screwdriver in slot of the clutch, you have to be careful not to damage the plastic slider. If you open up the clutch like you are changing the belt the screwdriver will go into the clutch farther and which will also make it easier to keep the clutch from rotating. I hope that helps, let us know if you have any other questions.

    • @judydoiron8943
      @judydoiron8943 Před 7 lety

      TK ,

    • @ROTAXD
      @ROTAXD Před 6 lety

      TK put the unit in gear, have sombody step on the brake and hit it with an impact wrench. Been removing them since the 70's with snowmobiles.

  • @blackmetalchevy
    @blackmetalchevy Před 5 lety

    Will the puller from the rzr 800 work?

    • @EPIperformance
      @EPIperformance  Před 5 lety

      No it wont. It has the same threads but its to short and can damage the cover bushing if used. PCP-8 is the correct puller for the General.

    • @blackmetalchevy
      @blackmetalchevy Před 5 lety

      Thanks for the quick reply! Good info thanks👌

  • @mohammedpolaris8913
    @mohammedpolaris8913 Před rokem

    Only cluchu