2010-2013 Hyundai Santa Fe Kia Sorento 3.5 Intake Manifold Replacement
Vložit
- čas přidán 28. 02. 2024
- This 2009 Hyundai Santa Fe is getting a new intake manifold.
😎If this video has been helpful consider supporting us with a cup of coffee! 🙂
www.buymeacoffee.com/ValleyMo...
🛒PARTS LIST:
▪️ Intake manifold: amzn.to/3weJ7u9
▪️ Air filter (optional): amzn.to/3wisgXs
▪️ Dielectric grease: amzn.to/3HDPTMw
🛒TOOLS NEEDED:
▪️ Electric ratchet: amzn.to/3Sw4W12
▪️ Flashlight: amzn.to/48OaGJi
▪️ Flex head ratchet: amzn.to/47PZwm7
▪️ Pick set: amzn.to/3u9AdNZ
▪️ Plier set: amzn.to/3uhTvRi
▪️ Screwdriver set: amzn.to/4b6BZ39
▪️ Socket and wrench set: amzn.to/4b6K8ob
▪️ Torque wrench 1/4: amzn.to/493Xr70
➡️I am part of the Amazon affiliate program and get a small commission when purchases are made through the links provided.
🔺DISCLAIMER
The information provided by Valley Mobile Automotive (“we,” “us” or “our”) on this video is for general informational purposes and entertainment only and does not replace professional advice.
All information is provided in good faith; however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on the video.
By working on your own vehicle, you take responsibility for the outcome.
Under no circumstance shall we have any liability to you for any loss or damage of any kind incurred as a result of the use or reliance on any information provided on this channel. Your reliance on any information on the videos on this channel is solely at your own risk. - Auta a dopravní prostředky
Paid $900 to replace this thing, it was that day and this repair that inspired me to start doing my own! So far I’ve done oil, brakes, and I’m getting into suspension work now. Idk if I’m ready for engine yet, but I’m gonna keep on learning :) thank you for helping us common folk out! We really appreciate it ❤
@@thebayjay You're welcome! I wish you the best in your diy journey 🙂. One recommendation is to get a good torque wrench. The most common issue with fasteners is over tightening. My torque wrench is among the most used tools I have 👍
but why lol oil leak or somthing ?
Great job, I don't have the tools or know how, how much would this cost to fix
Awesome job 👏 👍 I have one to install just trying to get tip
I believe book time is between 3 and 4 hours so you should be good doing it over the weekend 👍
Great job, I don't have the tools or know how, how much does a job like this cost?
That is the problem with the P200A. Greetings and blessings.
What problems were you having to make you replace the lower intake manifold? Bad intake runner actuator or broken runners?
It had a code for the intake runner. It's pretty common in this generation Kia and Hyundai.