How to use Boat Motor Flushing Muffs
Vložit
- čas přidán 7. 06. 2024
- Flushing an outboard motor with muffs. How to flush your outboard motor or boat engine. Boat motor flushing muffs. If you are wondering how to use motor muffs on your boat, this video explains it how to properly flush your boat engine with the motor flushing muffs. I show you how to easily flush a boat motor and why you should use engine muffs to run your marine engine out of the water. Engine ear muffs or outboard motor flushing will not be a mystery anymore!
Flushing boat engine after saltwater is important for the life of your inboard or outboard engine to reduce corrosion and keep your engine running longer. You should flush an outboard motor to remove silt, debris, salt water and to keep the cooling passages clean and clear.
Buy inexpensive flushing muffs amzn.to/2PXG8Sk
Buy dual flow Marine Motor Flusher muffs amzn.to/3tqMhUC
Buy plastic garden hose shut-off coupler amzn.to/3eWN76n
Buy a 2 pack of brass shut-off couplers amzn.to/3h82Fqy
As an Amazon Associate I earn a small commission from qualifying purchases.
#enginemuffs #flushingoutboard #boatengineflushing
Timestamps:
00:00 Introduction
00:41 Why we need to use muffs on your boat engine to prevent damage to your impeller
01:49 When do we need to use engine flushing muffs?
02:59 How do boat engine flushers work?
04:15 How to put motor flushing muffs on your engine
06:36 How water flows with the muffs on
07:23 Small outboards do not use engine muffs
07:43 Last words about boat motor flushing
❤️ Subscribe to my CZcams Channel / waynetheboatguy
📷 Follow me on instagram! / waynetheboatguy
☞ Follow me on TikTok! / waynetheboatguy
▶︎▶︎▶︎Playlists About Boats
🚤 Tiny Boat/Jon Boat Stuff • Tiny Boat - Little Boa...
💰 Boat Shopping • Boat Shopping
🐋 Boston Whaler • Boston Whaler Videos
🛥 Boats, Boat Trips & Boat Accessories • Boats, Boating Trips, ...
⚡️ Electric Boats & Electric Boating • Electric Powered Boats...
🛶 Kayaks & Kayaking • Kayaking & Kayak upgrades
🪦 Curtis Creek Maryland Ship Graveyard • Curtis Creek Maryland ...
🎲 Boating Shorts • Boating Shorts
▶︎▶︎▶︎Boat Engines & Motors Playlists
⛽️ 2 Stroke Outboard Motors • 2 Stroke Outboard Engi...
⚙️ Volvo Penta Maintenance & Repairs • Volvo Penta Maintenanc...
🌎 Newport NT300 electric outboard • Newport NT300 3 hp Ele...
🚽 Evinrude 2 - 2 hp engine • Evinrude 2 - old Evinr...
🔒 Seized Suzuki DF20 • Suzuki DF20 Short Shaf...
🔧 Inboard/Outboard Maintenance • Inboard Outboard (Ster...
▶︎▶︎▶︎ Boat Repairs & Projects Playlists
🛠 Low Cost Boat Repairs & Projects • Low Cost DIY Repair & ...
🔨 Boat Transom Projects • Boat Transom Projects
🧰 Boat Repair & Maintenance • Boat repair, maintenan...
🛞 Boat Trailer Projects • Boat Trailer Repairs &...
▶︎▶︎▶︎New Boater Playlists
📌 Boating Education & Tips • Boating Education and ...
📓 Boating Basics • Boating Basics for New...
🆘 Boat Safety • Boat Safety - videos t...
❄️ Boat Winterization • Boat Winterization
Sound effects and additional music is copyright free from iMovie
Music is Orient by SefChol & Hyped by Andrew Huang both from CZcams Audio Library - Zábava
In the early 1990 s the local marine mechanic told me that as long as I was using my 9.9 Yamaha kicker motor once a week or more not to worry about flushing with fresh water.The impeller would not dry out in those circumstances. The boat I have now does not stay in the water and I do flush it unless going out again in a few days. A lot of newer outboards have freshwater fitting for flushing at the dock but often they are to be used with engine not running.Most I.O. (sterndrives ) around here have heat exchanger closed water cooling where you have fresh water and salt water circulating thru a heat exchangerin separate copper tubes. CHEERS from Wetcoast Canada!
I run my Yamaha on the flush port all the time and have never burned an impeller. Just don’t rev the motor. If idling, it’s fine and use a large hose, 3/4” to make sure you have enough water flow.
I found so much information in this video. Thank you.
Excellent explanations. Great video. Thanks
Very educational and very important
Perfect explanation
This video helps a lot thanks
Thanks for the video, I had no idea what those were for, thanks and keep up the good work 👍👍💯
Thank you for the kind words!
Thanks i learned something. Appreciate you I’ve used many of your videos. I’m new to boating and learning a lot. Thanks again
Glad to help - and thank you!
Seriously you do a great service and I’m sure there’s more people who would attests
As I mentioned in my first comment on your gas mixing video, just bout my first boat 88 ranger v393. I plan on taking it out for my first time, it's a two stroke and I wanted to save myself some embarrassment at the dock, so I was thinking about trying / learning to start my boat in my yard tomorrow, once again your video didn't disappoint
Good luck! When do go to the ramp, try to maintain patience and clear thinking because it can sometimes be a challenge!
Your newest subscriber👍
Thanks, helped a lot for first time flusher:-)
Glad it helped
Awesome thanks
Thanks
Some have a new water pump on our inboard mercruiser. When running the muffs on land, there's some water dripping below the pump if the hose is up too high. Is this normal??
I’m a salt water boater and keep my boat a a marina. I use my muffs almost every time I come in. I’m on the St. John’s river not far from the Atlantic Ocean. Many of the folks in my marina do not flush their engines. But a good number do.
Hi there, I am 100% saltwater and you need to run fresh water to rinse out the salt every timer you go out. I had mine at several marinas and normally they are suppose to rinse them for you after every time you bring it back in. Since I have mine on a lift now, every time I rinse.
I just purchased a 1993 excel 4 cylinder 240 volvo seeking a place that carry parts
Great video Wayne I just can’t find your description spot to order these on Amazon?
The video description text is just below the video - on mobile sometimes it's hard to access.
Nice video!
It would be usefull to see it with the motor running, imho
Im a salt water boater, i flush it every day i run it, exception when i stay aboard on weekends
Up in Wisconsin we call those boat motor "cups".
I flush all the time after I have been out on the lake as it’s salt based I also use this stuff called salt away works good and helps stop the build up of salt corrosion
Nice!
You ever get a boatload (no pun intended) of tools from a buddy and find that one odd tool you have no idea what it is?
Yeah, that just happened. I had no idea what a boat muff motor cleaner thingy was until today. Now I know!
Problem is... I don't have a boat, but now I have a muff. I am blessed! Now I just need a boat.
So on my engine above towards the top or midway of the engine there’s another unscrewable outlet that I can attach a hose to, can that also be used to run a boat, or is that just strictly to flush?
I have seen those, but I personally haven't had an outboard with that feature.
I watched the whole thing thinking i may use this on a small outboard until the end of the video 😆
I've loved all your episodes I've viewed but this one is like explaining to new boaters which is the top of the boat and which is the bottom so they don't launch their boat upside-down. This was funny.
We flush the motor after every use in saltwater, we also run a product called Salt-Away through the cooling system.
That's a good thing to do!
4:30 looks like a really really tight fitting headset
Yup!
Just to share a caution that is flagged in my Mariner 50HP owner's manual: Do not have the water flow too high (they suggest opening the tap/faucet to no more than half. Otherwise, to much pressure will damage seals in the engine.
If you think about it, the motor can only take as much water as the tell-tale can flow, so not much.
good point!!
Hey my boat dose not want to suck the water and I just got a new pump and it over heats and i don’t know what it is
Something might be clogging the passages. Sometimes pieces of the old impeller can block the flow.
Salt water only..go with my cuzzin once a week for around 5 months and used the muffs once..we always at full throttle right before we get in for around 20-30 seconds..think the one time we didn't fly it in is when he used the muffs..🤷♂️
Motor ran perfectly on the water all day today with a perfect tell tail even at idle. But upon applying my earmuffs for a flush I had no tell tell. Any idea?
I've heard of that happening. Sometimes the muffs don't push enough water through for some motors. Some people only get water out of the tell-tale when submerged in water.
That’s because you’re improperly installing them they go the other way that way when you turn the proper on the hose don’t get stuck in the prop
how long can you run an engine on water muffs?
It depends on whether you're getting a good seal where they mount providing a good flow. If you rev the engine, sometimes a hose will not provide enough water, so keep that in mind.
Hello, I put a new impeller pump but no water comes out
Check to make sure the outlet hole/pipe/tube is clear. Sometimes there's a bit of debris in there.
2 burritos and a 6-pack usually does the trick! Lol
lol
I'd like to suggest that you put the muffs on from the front of the drive. this way if you put it into gear you're not going to hit it with the prop
I was thinking the same thing. How do I ensure the prop doesn't get damaged
Just put the muffs on from now side will not hit prop then
if you watch the video, at the 5:15 mark he explains that he can’t do it that way on this particular out drive because they won’t reach
If you put the muff on the way you did, the propeller would hit it when you started it I’m guessing
Sometimes they only fit on one way.
You do not need to put your boat in gear to flush it neutral is just fine but he did put it on backwards
Only problem I see if you put your engine in gear the the propeller will hit the Muffs. Because sometimes your propeller will turn.
Yeah I was quite worried about that when I used them the first time. I had my wife watch to make sure everything was ok.
@@WayneTheBoatGuy why not just flip it around and hit it from the back?
Bar goes the other way
Wrong. They are called Mickey Mouse muffs. 😆 Thanks for the video! 👍
Don't turn the hose on full blast cause you'll lose more water than your motor is taking in an it will over heat
.
haha
Guys, skip the first 27 seconds. You will thank me
that was the best part, where’s your sense of humor!? 😂
That was my favorite part lol, now I like the guy and can start learning lol
Wish there was a fast forward, guy loves himself too much.
If you weren’t so mean, I’d tell you how you CAN fast forward a video.
Grasp every word this man says,,,, he's here to help overcome your ignorance and or arrogance
He's a gem. Learn how to skip.