How to run your boat on Muffs. Glastron Cold Start

Sdílet
Vložit

Komentáře • 64

  • @BlueJeansOverland
    @BlueJeansOverland Před 3 lety +1

    Love the sound of a boat engine starting every time!

  • @donpack2074
    @donpack2074 Před 11 měsíci

    Thanks for the great video! Just bought a 1987 SeaRay with brand new motor and am taking it out for the first time this weekend. I thought it might be smart to run the engine first and your video is perfect. Wish me luck! :)

  • @jordanw83
    @jordanw83 Před 11 lety +4

    Thanks for the info, i think it is common for people to be in my situation. I bought my first boat used and got almost no useful information on how to operate and care for it. This video helped alot thanks for taking the time to make it!

  • @livintheislandlife7561
    @livintheislandlife7561 Před 3 lety +2

    I could listen to that all day it sounds just like a 300 verado

  • @jimmersengine
    @jimmersengine Před 2 lety

    Thank you, just what i needed. tilting, impeller and all.

  • @timhumphrey8367
    @timhumphrey8367 Před 8 lety +12

    Googled this topic & your video was AWSOME. Thx for taking the time!!

  • @albertonex19
    @albertonex19 Před 12 lety +1

    I've been watching your rebuild and I have to say...Well done!fantastic work,do it right if your going to do it at all,great advice on the pre engine checks,it's not done enough.Bravo!

  • @brandonskeels2761
    @brandonskeels2761 Před 11 měsíci

    I have questions man!you sound like somebody i can ask! GREAT VIDEO

  • @mo55MuRd3r
    @mo55MuRd3r Před 8 lety

    Thanks brother. Great video. Really appreciate it!

  • @5153flash
    @5153flash Před 5 lety +4

    I found out the hard way that the Muffs are a must use. I hooked a water line directly to intake on engine and figured that was good enough,,nope!! The water pump was still not getting water and I smoked the rubber propeller. And it is a job to change.

  • @Bansheeboat
    @Bansheeboat Před 4 lety +1

    Awesome video really enjoyed it! 👍😁👍

  • @inthewoods352
    @inthewoods352 Před 11 lety +3

    This is a good video, thanks for sharing. I'm a long time boater but bought my first inboard outboard last year. Getting it ready for the season and started it for the first time on muffs when I realized I had never seen an in/outboard run on muffs and wasn't sure if mine was functioning properly. ie water pump discharging correctly. After seeing your video I know mine is operating fine. Thanks again.

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 14 lety +9

    It is like revving your engine in your car in neutral. The key thing is to make sure your drive is down, or you will screw up your u-joints.

  • @MrSergio608
    @MrSergio608 Před 11 lety +2

    In the two years I've owned my boat I never new to lower my trim. I hope it's not to late. Thanks for the video.

    • @SportsShorts1212
      @SportsShorts1212 Před 3 lety +1

      I learned this recently. I've fortunately only owned the boat for a few weeks, but I've been worried about the damage I've done the 5 or 6 times I've had it out.
      Its so damn hard to find an owners manual for my boat, but its videos like this that help me learn all the things I'm missing by not having an owners manual.
      Good luck with your boat. Hope you didn't cause any damage.

  • @TZakPol
    @TZakPol Před 12 lety

    Thanks a lot for this video. Just Bought today a 2007 monterey 214 fs with 5.0 Mpi alpha one set up. I will be doing some tune ups thus your videos will come handy.

  • @leithaingram9268
    @leithaingram9268 Před 10 lety +1

    GREAT video!

  • @davidreynolds4684
    @davidreynolds4684 Před rokem

    Clean rig. Makes me miss my avengers. Dont miss the 454s so much but the boats are great. After a genius named Marshal at eagle mountain yacht sales built a jet for me with a 425 cadi big block i have no use for a 454. Id run all day long full throttle if not skiing. Go home and do it again the next day. And the next. Fill it up and only have used half a tank. No oil useage no oil leaks no typical probs 454s are famous for. 90+ mph in a big jet boat that had the driving characteristics of a bladed outrive ski boat.

  • @blackmindseye
    @blackmindseye Před 14 lety +1

    thanks for this. I'm gonna go try it!

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 12 lety +1

    The 454 is a beast. Mine does not burn a drop of oil, and I love it.

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 11 lety +1

    I know how you feel. I am glad i could help.

  • @brockjohnson4389
    @brockjohnson4389 Před 10 lety +5

    madd props for a sharp old school boat! rather have something like this that was structurally sound than a brand new one! Mine is a clone of this one and it to is basically flawless! same color scheme and everything!! sweet ride.. I do notice though that mine compaired to others is alot flatter (lower or less of a "deep v") but mine to Pops right outta the water! last year my buddy was running his 19' searay next to me and was just him and his girlfriend in it! He passed me and even though i had me + 4 or 5 others with me i still managed to catch and pass his ass very veeerry easily! needless to say he was pissed! haha suck it... right!? lol Mine will do ABOUT 53 mph if the lake is fairly still!! Love the older glitter paint scheme!~! thats old school cool!! beautiful boat you have too!!

  • @nolansherman9063
    @nolansherman9063 Před 2 lety

    When my Dad used to have a 2 stroke boat he likes to do is put the throttle in forward to give it a little gas before starting the engine

  • @josephmills3864
    @josephmills3864 Před 7 lety +1

    sounds good!!

  • @juliebelanger8378
    @juliebelanger8378 Před 12 lety +1

    thanks for the info.

  • @everythingtv7433
    @everythingtv7433 Před 9 lety

    Here is a tip use the circle earmuffs they stick on REALY good and create suction trust me I learned the hard way

  • @nick8087
    @nick8087 Před 7 lety +1

    nice boat 👍👍👍👍👍👍👍👍👍👍👍

  • @fletcherwhite1172
    @fletcherwhite1172 Před 3 lety

    Thanks!

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 13 lety +2

    @renkenboats
    Sounds like you might have a cracked manifold or cracked block. Check all the hoses first and then really check out where the water is coming from.

  • @newarkstunt202
    @newarkstunt202 Před 14 lety

    great video

  • @olafg19
    @olafg19 Před 2 lety

    Beasty engine 👹 sounds amazing

  • @Bewildered674
    @Bewildered674 Před 2 lety

    Just acquired an ‘89 Glastron Conroy. Bought an “ear muff” attachment with hose hook-up on only one side. Wondering if I should have purchased a dual-flow? Any input?

  • @freedomtx5457
    @freedomtx5457 Před 7 lety +2

    Do you have to start every few weeks. what happens if you just take out to the lake once a month . I haven't started mine between trips.. Haven't had any issues. Is this just a preference
    thing?

  • @showntell49
    @showntell49 Před 14 lety +1

    I thought I read somewhere that it's suggested not to run the motor past idle on muffs. I don't really know if it hurts anything.

  • @dannybam1
    @dannybam1 Před rokem

    Anybody know do you need your tilt mechanism to be working to lower the stern drive?
    My boat I bought used to I'm trying to start it and it's got a tie down holding it up and I'm afraid if I loosen that tie now and I'm not going to be able to get it back up 🤣 thanks

  • @JacobEcret
    @JacobEcret Před 5 lety +1

    What’s exhaust system do you have on it?

  • @SiegeNerd
    @SiegeNerd Před 11 lety +1

    Nice video. How would I cold start an OB I just bought a Sea Ray bow rider 180 1989 and It takes me like 30-40 min to start it after its been sitting for a week. I am not familiar with how to use the choke either. Thanks!

  • @Arlind86
    @Arlind86 Před 12 lety

    Thnx for the video. i got the same 454 7.4l as your other boat in your other videos on my first boat i just purchased (2755 bayliner) Im learning a lot by looking at your videos. Anything i should be cautious on these motor? thnx for everything so far im.a huge fan

  • @78ginop
    @78ginop Před 2 lety

    When you put it in gear does the water come out by the prop?

  • @patonbike
    @patonbike Před 3 lety

    why does the prop spin a little in neutral ?

  • @BeamerTheFox
    @BeamerTheFox Před 4 lety

    ol sinkin renken neat boat

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 11 lety +2

    Sounds like the fuel is draining out of the carbs. I would start with a rebuild kit.

  • @Cristoviene939
    @Cristoviene939 Před 13 lety

    hi i have a 1988 renken boat usit for 2 years now but now i conect tha muffs and water leaks in the belgium , can u help any susgestions

  • @michaelwalkermw83
    @michaelwalkermw83 Před 8 lety +1

    I am learning about caring for a stern drive boat this video will help me learn the tricks of caring for a stern drive engines I knew that I will learn a lot on how to care for the stern drives I knew this will help me in the next few years time and it will be good if anyone could help me learn the basics of stern drive care and things related to them I knew how to care for the stern drives myself do you think that I can do it with a disability that's having someone help me run the stern drive motors and give me advice on how to do it safely I am a rookie in the stern drive boats and I knew this will be a new thing to do this will happen in a few years time and I need some advice on how to do the maint on the sterndrives and point me in the right path in regards to the sterndrives care and maintenance and what to watch out for when buying a used stern drive boat im from Australia im new to the sterndrives my 1st stern drive boat will be a bayliner with the Mercruiser stern drive that's the plan for the future

  • @MrIdance1
    @MrIdance1 Před 11 lety

    what is feather the throttle ?

  • @bdudley9859
    @bdudley9859 Před 11 lety

    Should i buy a boat based on the motor running off of the muffs or is there something to be gained by taking it on the water? Can you put it in gear while on muffs?

  • @1986Honda4trax
    @1986Honda4trax Před 5 lety

    My family used to lower the motor inside a garbage can and fill it with water

  • @chrisgates2227
    @chrisgates2227 Před 2 lety

    😎👍🌵🌵🌵🌵🌵

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 11 lety +1

    It just keeps the bellows from developing a memory. You should be replacing the bellows every few years anyway.

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 13 lety

    @sechadyl
    Why would I need to worry about that?

  • @Joshdavies146
    @Joshdavies146 Před 7 lety

    How come your prop still spins slowly in neutral? Mine stays still

  • @ryanpoe8203
    @ryanpoe8203 Před 3 lety

    Mine won’t rev up even in gear

  • @FriscoBoatersGarage
    @FriscoBoatersGarage  Před 12 lety +1

    If it is an outboard, it is different. This is an inboard/outboard.

  • @dalexdalex
    @dalexdalex Před 4 lety

    If the engine doesn't start, we have to wait around 5 minutes, before trying again!!!

  • @Technicalgee
    @Technicalgee Před 4 lety

    I think he meant to say was “running it till it’s fucked costs big bucks

  • @floaterHD
    @floaterHD Před 12 lety +1

    he didn't put it in gear?

  • @jakobe75
    @jakobe75 Před 9 lety

    What year/model Glastron is this? Looks badass?

  • @playadna747
    @playadna747 Před 5 lety +1

    you must live in ohio