DIY Dolls Storage
Vložit
- čas přidán 9. 12. 2023
- DIY Toy storage, for dolls made from MDF ply and a bit of oak.
Website: www.hewandawe.com/
Want to support the channel: / hewandawe
Find me on Social media
Facebook: / hewandawe
Rumble: rumble.com/c/HewAndAwe
Do you have an idea, a project to work on or a proposal? Please leave a comment below. I will do it for you.
If there’s something I’ve made you would like to buy: www.hewandawe.com/
★Thank for watching!
★Please like, share, and subscribe my channel here : / hewandawe
Tools in this vid...
VEIKO 150X100MM square
www.banggood.com/custlink/KDG...
VEIKO 600mm Framing Square
www.banggood.com/custlink/KvG...
Silverline F-Clamp 150x50mm
amzn.to/46KCHQa
Festool ratchet clamp
amzn.to/47H7q1H
Iwasaki Carving File
amzn.to/3Td2jC1
DainerMade mallet
www.dainermade.com
HONGDUI Miter Gauge
www.banggood.com/custlink/vGD...
Festool Plunge-Cut Saw TS 55
amzn.to/3uNPy6Z
Festool HK 85
amzn.to/3uN9Bm5
Festool Groove cutter N-HK85
amzn.to/3R4zrJA
Banggood ratchet clamp
www.banggood.com/custlink/KKK...
Festool Kapex 120
amzn.to/46Nwx1N
Dewalt Impact driver
amzn.to/4a7OI4T
Cmt 6mm kerf Groove Cutter blade
amzn.to/3TcWoNn
#woodworkingprojects #woodworking #hewandawe - Jak na to + styl
Just in case I don't get another vid done in time... I hope you mother-lovers have a wicked Christmas!!! Be-lucky!!! 🍺🍺🍺
Up yer bum Bennie!!🍺🍺
Merry Christmas, you filthy animal 😉
Good video but the thumbnail is your best work all year.
Cheers dude, I hope you’re well!!! 🍻🍻🍻
Another interesting build, bud.I liked the way the clamps held the track and the rebate material in 1 go. And the fk up commentary at 4:30 lmao 🤣
Cheers dude, that took a while to figure out. Those clamps are pretty useless otherwise, for the track I mean. Just wish I’d made it lower.
"old habits die hard" humm.......is that the case for the defence? Nice work Ben.
Noo… just some of us aren’t part of the narrative 😆 Hope you’re well dude! 🍻🍻🍻
Nice shade of pink that ,compliments of the season to you .
Cheers dude, fingers crossed for a better year to bud! 🍻🍻🍻
You just can't compete with that foreign, suave, mysterious pollen... 🤣 Also, today's word is "SENDBUMS", and the clue is "I like them thick"...
I’m not gonna lie, you’ve lost me dude? I hope you’re well mate!!! 🍻🍻🍻
@@HewAndAwe well its been a while since you recorded this one ;) In this video you shared the mating habits of Oak trees preferring distant pollen, and also used the '9 Out of 10 Cats play Countdown' Timer... hence the word puzzle ;)
@@FixitFingers Gotchya 😂 cheers dude!
....I got 437.... close? 😅
Well, the moral of this woodworking video is that also the oak-tree female is impossible to live with.
Thnx and have a great season holliday!
I thought it funny was all, kinda apt... Cheers dude! Stay off the eggnog 🍻🍻🍻
Cool vid Ben! Nice to see your videos on here. Love your work! Merry Christmas and happy new year buddy!
Hiya! Thank you Madonna, same to you let’s hope for a better one eh, it’s gonna be an interesting year next with all the worlds eyes on the US 😬
Can’t wait for some good decent time off get some hours in the garage and buy some new stuff. Merry Christmas love the vids
Terrible time to buy tools dude and after Christmas, companies put up their prices about 3-4 months before Christmas to then drop them after Christmas down to what they were calling it a sale, same for Black Friday 🤦🏻♂️ Barstards! I learnt that a while ago, saved for ages for that planer thicknesser, then when I went to buy it it was 300 quid more, I emailed Axminster about it and they answered but refused to comment on me calling them out.
Nice video. Nice work.
Cheers dude, hope you had a lovely Christmas and new year 🍻🍻🍻
Cool project that mate! Merry xmas to you too, have a good one 🤙
Cheers dude, I hope you had a lovely Christmas, me I’m glade it’s over and the days getting lighter! 🍻🍻🍻
Great video and project mate!! Have a great christmas!
Cheer buddy!! Hope you have a good’n and a better new year, shit is gonna get interesting no doubt, either game over or game on, depends on the US 😬
Merry Christmas mate, that poor cat 😢 my name on da telly yey 😅 love the motivational speech, you should be a public speaker 😮
Love that housing joint accessory thingy bob.
Cheers dude, hope you’re on the mend mate!!!
@@HewAndAwe Ye getting there mate 👍
Love all ye stuff Ben. Take care & stay safe. Merry Christmas to you & yours.
Cheers Doug, be lucky!!! 🍻🍻🍻
nice
Cheers dude! 🍻🍻🍻
well done mate i was going to say time you paint it was going to be tight keep the videos up....your honest..............next time your in london i will buy you a pint
Thanks mate!!! …was in London not long ago and man it was like a place I’d never been to before, made me angry and I know this is being done by design 🤨 it’ll get really interesting when that shit moves to the country… we’ll see dude fingers crossed we’ll all live together happily and we’ll smash a beer or two down! 🤷🏻♂️
any time mate stay lucky@@HewAndAwe
Very creative way of stowing toys! BTW, I personally prefer "non-smooth and shiny" but I won't turn it down, either! Merry Christmas buddy!
You’ve lost me there dude, non smooth and shiny don’t go hand in hand? What have I said?? 🤦🏻♂️
When you peeked up Barbie's dress..
Looks mint m8 that festool blade is sommit else. If only we could get decent dado blade that doesbt burn hole in pocket over here we'd all be laughing. Mind u there is a danish viking who is somewhere with his gidted one the now. Hope things are picking up m8 catch up soon 👍🏴
I looked at the stacks and was like nah fuck that… taking the tool to the job wins that dado stack argument for me. But if you showed me the same jig for a table saw, I’d get a lazy lobb! Blades have wobble…
@@HewAndAwe very true and they ain't fuking cheap either think a looked the one jesper got for his table saw (won't fit mine) even still was like 280 a think off hand. A no you said that festool one will only fit festool but is that deffo as a have the Bosch plunge saw (newest one) and it'll take festool clamps track etc wondering if it'd work. Not sure if you've used Bosch one??
Serious question, Ben. What affects your decision to use the track saw or the table saw when cutting sheet ply or MDF?
Getting a constant cut = table saw, breaking down sheet goods track saw, then table saw. Or the cut is to long or wide for the table saw, like a 4’ by 4’ pice of mdf on the table saw won’t go well. There’s only about 300mm support before the cut on a table saw too. Safety, precision in short dude. I also hate long cuts on the track saw cause u inevitably have to pause the cut to walk up to where the saw is to keep going and that leaves burn marks.
Yep. Big sheets are a pain. I've probably got room for a table saw with the panel/sliding bed attachment. I'm thinking that will be useful to assist with the long rips. Have you used one? Thoughts?
@sparkyoc6766 oh-man that’s kinda up to and what you do a lot of, me personally even if I had the space I wouldn’t get one cause they’re so big and I don’t use sheet goods much. I would t want to loose the floor space mostly, the one I used was a long time ago though near 20 yrs ago, not like the current ones that are a bit smaller. The thought of the space needed I keep coming back to, I mean you need 16’ 8’ either side of the blade to rip a 8’ by 4’ and 4’ front and back of blade. I might be wrong but that’s a lot of space either way that other tools could be using. I’d be very surprised if the cut wouldn’t still need a clean up pass when ripping a full sheet on a panel saw. I think I’d sooner have two cabinet saw as a double table saw island than a panel saw too, one for rip one for cross, actually make that 3, and one for rebates etc.
I am with you T then A, not A then T.
In the quiet words of Manuel, “Que?”
Were you shown an add every two mins or saw less ads please?
My ad blocker is good enough that I don't see any ads.
Think a was about every 4 mins. Although watched in 3 sittings f****g kids every time came back straight into add.
Add blocker, no add's
Only saw 2 ads Ben,
Nice one Ben. Liked the tip about roasting mdf edges and the educational factsheet on migrant oak pollen raised a smile.
Nothing wrong with grown men playng with dolls......
Oh no! What am i saying!!! My wife's gonna kill meeee!
#Vic&Bob
😂😂😂😂 that takes me back!!!
Alrite Ben,
Just wondering if you've got as many subscribers now as you did 3 years ago?
I ask because you said on one of your vids, the one where you make a chair for outside your workshop.
You asked if we knew what you had done to lose a bunch of subscribers.
I have no real answer for you other than to say, they are a bunch of stuck up twats and have no clue of who you are, or what condition you suffer with and how far you have come, and I don't mean mileage.
They don't know how you gained your knowledge your experience and last of all, they don't know a good thing when they see in front of their eyes.
I have ADHD and I think you explain yourself very well, and your filming background shows up as a talent too. So give yourself a pat on the back.
So there, you're not just a pretty face me old mucka but a talented woodworker too and a talented movie maker as well.
Oh, and let's not forget your voice-overs and background music. What a treat that is people. You are a funny guy. Steady, I feel a browmance coming on.
Thanks, fella, you've done yourself proud.👍
I don't suppose you're a hammers fan are you? Na, that's to much to ask for.
COYI ⚒️🏴
Haha thanks dude, I’ve had a very low month and a bit and just getting my shit together now and reading this brought a tear to my eye!!! It’s not getting any better here for me too. CZcams hasn’t been any help answering my questions either. Workshop is up for sale… it’s just not good what ever way I look. Need to find the money for a workshop and get my tools safe… still at least the days are getting lighter! 😊 nah, I’m not a footie fan at all, I might have been in the old days when it wasn’t money oriented but not like it is now.
Your mistakes make me foolishly think that there is hope for me yet.😀
Was half the point dude 😊 Hope you’re having a lovely weekend mate! 🍻🍻🍻
😅😂Ben, I can't help but piss myself at your video's there sodding right on the nail!!!. The screen explanation of the oak tree's reproduction is just brilliant and right on point, as for the ending when you got a little frisky with Barbie 🫣 i couldn't help but burst out laughing. Which scared the shit out of my wife, might of had something to do with the fact that I watched your video at 4am. Worth everything!!! Keep up the great work buddy😅😂
Lmfao!!!! Seems the lefty lot don’t have a sense of humour, I’ve had to remove and block 3 so far. I used to care but it’s all gone to far now.
@HewAndAwe you can lead a horse to water but you can't make it drink. The world's gone bonkers, there's too many do-gooders. Or should we say fekking dickhead's 🤣🤪🤯