Video není dostupné.
Omlouváme se.
Rickenbacker Bass Gets Outed For What It Is
Vložit
- čas přidán 29. 07. 2017
- Please watch: "Vintage Fender Jazz Bass From Japan"
• Vintage Fender Jazz Ba... -~-
Rickenbacker Bass Gets Outed For What It Is
Help Support the Channel and a great charity..get a DWOFS sticker and a guitar pick
paypal.me/Davesworldoffunstuff/8usd
Become a Patron
/ davey4557
Like me on Facebook
/ davesworldoffunstuff
Follow Me on Twitter
/ davey4557
So what I’ve gathered from this video: Rickenbacker is the BMW of bass. Expensive and you want someone else to work on them.
With a touch of turbo Audi S4 in the final days of ownership. You can always find them in the classifieds for cheap, just needs a little work. Probably a sensor to turn the Check Engine Light off.
And then you find out a turbo is blown and you have to pull the entire goddamned engine to get at them.
@@DriveCarToBar proper description of German engineering lol
Rick S I had one Bmw e39 and it is good car.... and four Ric crap....
@@piedirstaispalags6665 Christ.
Rickenbacker is more like the apple of guitars. They make it look pretty, despite it being shit and overprice the fuck out of it.
I get the impression that you don't like the guitar...
But, it makes a magical tone! lol
I always thought that the Orville Rickenbacker quality went down when they started concentrating more on Popcorn than instruments.
zapcan59 lmao!!
I just pissed my Depends !
Bahahahahaaa
lol
Or maybe Eddie should have stuck to flying airplanes instead of building bass guitars
Spoken like a true Canadian.
"I'll hug you afterwards, but you're getting punched in the face." 🤣
😂Haha 😂
Had to revisit this video. I got the 2022 4003 fire glow. They finally fixed the bridge issue, with a very nice fully adjustable roller bridge. The truss rod setup is now the standard single truss rod that is to be adjusted just like any other bass, no special tool. The frets are bigger, and the fretboard has no finish on it, just bare rosewood. The body is beautiful Birdseye maple, perfect finish and setup right from the factory. Definitely a premium bass. I’ve parked my P-bass now. It’s wonderful.
@@c4wolves I’ve seen a few 4003S from 2022 that still had the dual truss rods. I suspect that they may have had a period of transition where they phased out the truss rods. My 4003 has the single truss rod which I’m happy about.
Just when I thought I was free of the wanting a Rickenbacker curse, they make all these improvements and it doesn’t sound half bad again. It’s a good thing I’m poor
Headline: old man shouts at bass guitar.
And he regrets it for the rest of his life. "Children, let me tell you a story."
I don't think he knew the camera was on
The scary part is when the bass shouts back.
wreckd inee
That bass DESERVED to get yelled at!
I watch this video at least a few times a year, it's pure gold. This is really the best comedy channel on CZcams.
I almost have the feeling he doesn’t like Rickenbackers, not quite sure though.
Their weight alone would put some players off. Plus the bridge is offset in some models which means losing the G toward the higher frets
@@fredpearson5204 Did you hear me complaining about the weight? I have a preference for substantially weighted guitars
@@fredpearson5204 Ah, gotcha. I knew you weren't knocking what I said :)
I have a Classic Vibe 51 P bass that is way heavier then any of my Ric basses. Don't know what kind of wood the Chinese made that body out of but it sure as Hell ain't Alder or Ash. I don't find the Ric any heavier then my Flea Jazz or Player P bass.
When senile boomers try to fix things.
two output jacks one for each trussrod
groovedodger Nice one!
nicely played sir...........nicely played indeed.....this one goes to 2.....that's one louder id'in it?
Yeah but, that neck is going to be uniformly straight with two truss rods. Every cheap P-bass I previously owned, the neck was simultaneously bowed on the low E while warped on the G close to the nut. That's one of a few things a Ric has got going for it. unfortunately, it contributes to a heavy beast.
lol @ groovedodger
one loudah
6 minutes in to this vid and it's already the best review I've ever seen of a piece of equipment on CZcams.
Right?? Laughed my ass off. The description of the bridge was awesome!
Agreed!
This popped up randomly on my feed because apparently CZcams knows I love grumpy people cussing out instruments. Subscribed.
Still want a Rick though...
$700 in 1975 would be about $3250 today. Holy smokes...
The Ricks have however been in the very same pricerange since then
They are purposely over priced. They want you to "Appreciate" the guitar and buy it when you're ready. Hell I don't understand their business philosophy. Who do they think they are, Stradivarius??
I'm a bass and guitar repairman, going on (damn, I'm old) 50 years now. I loved your video, and I concur completely. Made me laugh out loud. Last one I've worked on, had the typical age related porpoising truss rod ends. Sometimes you see the threaded ends 'dive' into the adjustment cavity. I have some specially modded wrenches to adjust those. I have pulled out the rods on some, they are 'field replaceable' and you can get them from Rickenbacker, after passing an I.Q. test, and undergo a security clearance check. I had a smart friend do it for me! lol! I find that two rods do not provide any real advantage over one good one in a well made neck that hasn't had so much wood removed to make way for the gigantic truss rod assembly, that it's too weak to withstand string tension without them.TERRIBLE bridge design. Some lightweight crummy alloy bridge, and pot metal saddles with 'V' cuts. Intonation cannot be adjusted with the bridge on, and under tension. Combine that with weak pickups, in the wrong places for any decent tone, a bridge plate/anchor that will lift off the top like a North Korean missile, and a 2,500 dollar price tag, and you have the curse worthy phenomenon of the Rickenbacker bass. They are also wildly inconsistent, output and tone wise.
And stereo? Why? Your two pickup sound is stereo once it leaves the bandstand anyway.
ALL THAT said, ironically, to me, the best electric bass tone ever is on The Beatles "With A Little Help From My Friends" Paul, his Rick, a pick, and flats- and a bit of 'generation spread' as they bounced the bass tracks around.
to be fair, the two truss rods let you set different relief at the treble & bass sides. there are bigger problems with the 4000 basses... the bridge/tailpiece is lousy, & lifts. they used shitty soft fret wire & then (on some models) put binding across the ends to make refrets next-to-impossible. but worst of all is the unnecessarily massive rout for the neck pickup, that weakens the neck-through right where the truss-rod runs out & can't help you. after a few years of even light strings, lower than the low tension which is RIC-approved, the neck starts to come up, & on some instruments you'll be able to see the wings coming away completely.
my best '4001' is an ibanez with a bolt-on neck.
czcams.com/video/UP-TrHdfmSM/video.html
Thanks for decoding the bass sound on "With a Little Help From My Friends". I've always loved the bass sound on that, especially when he plays high up the neck, but I never knew quite how he was getting that sound. Now I want to go buy a Rick just to try it out, lol.
p.s. I didn't understand the remark about the generation spread
What's that refer to?
@@Hqhq-01 Back in the mid sixties, most of the hit records we know and love, were done on three track, or four track analog tape machines, not the 16-24 track consoles that were popular in the 70's and beyond. There IS a book, or at least a chapter in some book, about how The Beatles recorded Sgt. Peppers. It goes something like this:
Record the basic track, guitars, bass drums, scratch vocals- then, mix that down to one track, making sure it's what you want it to sound like then, save it and 'bounce' that to another machine- now, you have two, or three tracks to add things to. This 'back and forth' bouncing of the basic tracks, causes some 'degeneration' of the original signal, resulting in the expansion of the bass guitar. This sound can be nearly duplicated today, using apps and Pro-tools, etc.
P.S., my all time favorite McCartney performance- his note selection, articulation, and tone- is the brilliant "Penny Lane" Play along with it sometime, and have your mind blown. He BEGINS the tune playing in the upper octave- G-C G-C then a walk down.. it's his melodic genius. If a N.Y. session player attempted that, he would've been shot down by most producers. Thank God we have people like The Beatles, and George Martin.
I was familiar with the 4-track ping-ponging method that the Beatles were using, even after many others were using 8-tracks I believe, but I wasn't familiar with the term "generation spread". Forgive my ignorance but I'm also unfamiliar with the term "expansion" in this context.
People marry their instruments. For some reason.
Kurt Cobain was right--music gear isn't sacred. It's a mass-produced consumer product, like a TV set or microwave oven.
The ART is music making, not product ownership.
Kurt Cobain could not differentiate between a D’Angelico and a Bc Rich If you shoved them up his ear. And he was a shitty player.
That doesn’t necessarily discredit his opinion, but he had a very limited musical vocabulary so I would take that with a healthy Scoop of cynicism.
You're right, but people have always paid top dollar for Ricks, and it was over a third of a century ago when I was a little kid getting into playing guitar and bass, and was always hearing about how overrated they were--and how expensive they were. Probably 'cause I wanted one :)
I've also played a *very* cheap bass (an OLP, which is a Chinese-made Music Man knockoff) that was very, very good.
luchadorito - In a way, he was right. If you hear a particular song or even an album from a band, unless you knew what brand instruments and strings they used, it doesn't matter. You'd be surprised how many musicians don't even buy their instruments, but are given to them by the companies to showcase. That's the best way to sell a Les Paul, a Strat, or even a P-Bass or a Rick - letting the fans know what the musicians are playing.
And most online places will not list the prices of the Rick's......you have to call for them to get the price nowadays.
I used to play out often on a $175 Xaviere P-Bass and a Sansamp/QSC/Avatar rig ($500) and I would often get compliments on my tone and my playing.
Why can't I give this more than one thumbs up? This is brilliant.
First video by this channel I've watched...right around the 6 minute mark, I was in tears from laughing so hard, and I've never clicked the like button so fast. In a world of gushing, glowing reviews of this and that piece of musical equipment, it's refreshing to get an honest, raw, critical review of something so hyped.
My uncle has one, hangs on his wall while he plays his budget schecter lol.
Poor fool...
bongo twocanchoo rich fool in this case.
Have had four Ric basses and never had issues with any of them. I've changed gauges and types of strings, (Roundwound and Flatwound), and all the basses were easy to adjust. Truss rods and saddles. I did change the neck pickup on one to a Nordstrom and put a Hipshot bridge on one. My newest one from 2020 has the improved style bridge with individual adjustable saddles. That should have changed years ago. The truss rods have been updated, too. 1/4" socket has no trouble fitting them. And you can adjust them under string tension without flexing the neck. I still loosen the strings on any bass before adjusting.
I'm a Rickenbacker bass Fanboy, But everything said in this video is true. Doesn't change the fact that no other bass can get you that "Mystical Fuck'n Tone"
_Bayou Country_
HAAAAAAAAAAAAAAA!!!!! This is way too good. I love this guy. I wanna just kinda hang out while he sets up a whole bunch of these things. Brilliant.
Bullshit, Dave was never 18.
neurocherry lmao
He came out of the womb as a grumpy middle aged guy
I did the same thing you did, except it was around 1982. I wasn't told about the warranty, but I wouldn't have cared. I actually bought out of a guitar magazine, sight unseen for a pretty decent price; around $625. Put Rotosound Swing 66 strings on them too. Coolest damn sounding bass I've ever owned and regret selling it because it was a high end one with the checkered binding, black, Grover tuners, etc. Trying to find one now in decent shape cost around $5k or $6k.
I was a Geddy Lee disciple so I did everything I could like him. I worked my ass off on a farm to buy my guitar and amp. We played a lot of Rush and I practiced 4 to 8 hrs a day in the winter. I had that guitar for 6 years and never saw the need to refret it. It was a great bass.
Geddy Lee disciple's could choose from fender precision, rick, fender jazz, wal, or steinberger, depends on what era
My 70's bass purchase was a 79' Music Man Sting Ray. I never looked back!
i got a peavey T40 and a peavey T45 both from 1980s and i gotta say man im super happy with my purchases never looked back, i have been flirting around with some precision basses i will admit my peavey T45 is getting a bit scared but honestly ive had these guitars for so long the thought of selling them makes me want to vomit, no matter in what situation i am in, these babies are basically part of my family just those 2 basses... just those 2 i have no others, thats how much i respect not the brand, but the guitars itself because they're just that good
There always that one bass you'd take to your grave. I have a Matt Freeman squier. It's going nowhere.
I don't have a Ric, but someday, when I have the money, I will buy one. One time, I went into a store and I played a Ric. It was MAGICAL, but I respect your opinion. You either love 'em, or you hate 'em.
I agree...they are a polarizing bass. I have played 2 or 3 of them in a shop while I was in New York. One vintage, two new. All of them 4003. Absolutely hated them. I think what did it in for me, was the weird scale length. It's like 33 1/3? It just felt weird to me. I like thin neck profiles too, but the Ricks I tried took it to a new level.
@@isher9035 I played Fenders for years and had no issue with Ric scale lengths. If you didn't know the length measurement, would you really know the difference?
@@gutbucket260 If I didn't know the scale length, I'd know something would feel weird. I play on a 34" or a 30" scale length bass and both feel comfortable. For some reason, Rickenbacker scale just feels weird to me. I'm sure theres more to it than that, like the wider radius fingerboard combined with a thin neck.
He didn’t say the tone sucked; he said the engineering/mechanicals of it suck.
No mention the shellac on the finger board. Another aspect of why I haven't bought one yet.
That'd have to go!!
6:03 "I'd love to meet ya and just punch you in the face. I'd hug you after, but you'd get a punch in the face, just because." Awesome!
Dave says many a funny shit! Especially when he calls Ernie Ball...Ernie Ballsack!
Yeah, THAT'S Canadian!
$700 in 1975 = $3256.31 in 2017
Duke 1117 Bank of Canada says: $3169.44 which is $2548.77 in US funds as of July 30th, 2017
I believe mine (bought new in 1976) was closer to $500. But my memory could be off.
$425 in 1980 all day long at Alto Music in Monsey, NY.
Duke 1117 holy crap
TJH3113 alto is the best! They moved down the road. I'm in there all the time.
I come back to this video every couple of months to forget about my miserable life. God bless you and thank you for these videos.
I return to this video regularly, great storytelling
I had a 4003 and like most people, was so obsessed with the aesthetic and tone of a Rick. I gave it Godlike status in my head. Then I bought a backup bass, a Fender deluxe special active Precision. Cost like a quarter of the Rick's price. I've used that fender ever since, and sold the Rick. Day to day, the fender was just so much more usable. The tone wasn't as iconic but I didn't care because I didn't have to fuck around with all the shit the Rick makes you do. Have never regretted my decision
Well, in that case, can I have it? I'll even pay shipping.
Just thinking back Dave, 1973 I was 19 bought my first P Bass new $225 w/o the case which I bought a month later for $50 because I didn't have all the money. Best part of the story is I still have the bass and plan to play it on tonights gig....almost 50 years ago..
I have to set one of these up for a friend right now... your video was highly informative and helpful but also hilarious, your sense of humor is very relatable on this subject hahaha thanks for sharing your story
Don't hold back Dave, tell us how you really feel 😂
Gotta post this on the Rickenbacker Bass Fan page on Facebook and run for cover.
LOL, I'm glad you saw this, Troy. I was gonna post it your FB page
Haha, it's off to a slow burn over there now (on the Ric FB page). For what it's worth, I agree 100% with everything he's saying about them...there's just something about the bass that demands I have one. I've had mine for a few weeks but it's in the shop now...I hope my guy's not melting down over it. Actually, he said all the frets above the 12th were way high.
Thanks!
If I win the lottery, there's 3 or 4 models I would buy just for the "coolness factor". But, I've never played a Ric and said "oh, this is awesome, I have to have it".
Grumpy Dave is back, love it!
SlaughteredDecay delightfully bitter
How can Dave be so grumpy and yet so endearing at the same time? haha
When my brother was 12 years old (1985) my dad bought him a 1971 or 1972 4001 Rick for $250. I played drums, so we had an in-house rhythm section.
That Rick tailpiece is a string eating bastard if you play hard. My dad spent so much money buying rotosounds for my brother that over the course of the next 2 years dad gladly spent another $500 having the fret-board re-applied and new frets, Bartolini pickups, and a L.Q. BADASS tailpiece, and I think new tuners.
Essentially, it was completely customized. And they took that bass and turned it into an amazing instrument. Gone was the "Clickenbacker" sound. My brother always played with a pick because he was influenced by Chris Squire early on and the idea of playing it like a guitar made more sense to him - eventually he found guys like Lemmy from Motorhead, Joey DeMaio from Manowar, and a few others who played the bass like a guitar. These days, he uses a thumb pick to give him the option of switching back and forth easily. He eventually sold the Rick and became a steadfast Fender player. I believe he mainly uses Precisions, but I do know he has had at least two Jazz basses.
I wish I'd known he was going to sell the Rick because I would have bought it.
I love getting boozed up and fucking with guitars as well.
LMAO!!
Totally fucked up on the old sauce
Totally thinking the same thing. The other thing I was thinking was, "Why the F am I watching this when I only play guitar?"
Getting boozed up and fucking is easier and cheaper!
I thought the same, I love it!
I gig all the time, all genres, play hard, and it's all I use. Mine's built like a tank, cuts through the mix, I barely use pedals...mine is a 2007, there have been a lot of changes since 75. Those rotosounds are exactly what I use...they haven't eaten the frets on mine. It's needed the least amount of maintenance and I've played way more than anything else.
4003's used different fretwire
"I know all you guys love them, but can't, for the life of me, understand why." *plays bass. It sounds awesome.*
Peter Collin yep, exactly. As a tech I have similar feelings re: Rickenbackers but man, they just slay. Love my '79 4001.
It doesn't matter what it sounds like when it's built like shit. Ricks simply were never built to last. I'd take my Ibby BTB over one of these any day of the week. If you want a TRULY great sounding and playing bass, check one of them out. They're the best value for money you can get in a bass.
Uh, not really. Try an early (1950's) Fender Bass, like those played by Dusty Hill of ZZ Top or Sting of the Police , and then compare it to a modern Music Man Bass. The sound differences are dramatic. Granted, the bass guitar simply can't as varied and complex in sound as an electric guitar, at least to the human ear. But to say the sound of a bass is dependent only on the amp is an exaggeration. Plus, Hofner copies have long been well known for being very true to the original
rockhard not at all I can tell you if a bass player is playing a ric or a pbass and I'm doing front of house I am so much happier they just sound rock n roll in completely different ways, modern basses sound different and I hate them for rock n roll, personal taste but basses don't all sound the same.
Oh and complete bullshit on the amp thing, your telling me a strat, a Les Paul and a guild archtop all sound the same when plugged into a fender twin.
I like watching this every now and then, cracks me up, I love Rickenbackers but everything you say is true lol
You KNOW a Ric when you hear one. It may not be mystical, but it's goddamn unique. As much as I love playing my Ibanez SR900, I love to break out the 73' Ric once in a while. I never not love playing her despite her flaws. In this way Ric's are like a good marriage partner. You enjoy your time with them, really appreciate what's special and hopefully help them be the best they can be. Then, when they're gone, you bury them in the basement.
"my old nemesis" what a great first line
the two best days with a Rickenbacker: The day you buy it and the day you sell it......
I tried a new one out in 2005 and was smitted by the awesome tone options.
Mind you, I went from an EKO short scale to the Ric..fortunately I have a friend who is a master luthier and he helped me through the weaknesses. Nothing but nickel plated strings, action just low enough to get a nice bite when needed, almost always in tune, and that lovely growl that can be tamed. Got rid of the pickup guard immediately. The stupid rubber damper worked ok for a while until the rubber disintegrated and I took it out.
I'm still so smitten that I won't even try a p-bass..besides, I can't afford to bass around..fun times.
As someone who has abandoned using 'traditional' basses of all kinds, this was extremely entertaining. Thank you.
Great Video!
The secret to the Rickenbacker mystery is the string gauges. The folks at Rickenbacker use a weird selection of strings that no company makes a replacement set for. The G string is a .45, the D string is a .55, The A string is a .75 and the E string is a .105. Where did they get that combination? Nobody knows except them. I’ve purchased Rickenbacker strings but I’m currently using a set of D’Addarios that were put together at a local dealer that sells single strings. They work! Using anything heavier just doesn’t play well or sound good. I was lucky enough to find a very small screwdriver to adjust the bridge as well. No doubt theses instruments are quirky, but they do have a unique sound and playability. But never think you’re going to be able to change the strings like you would on a P-Bass! Thanks Dave for a totally honest view of these iconic basses.
I corresponded with Rickenbacker Prez F.C. Hall back in the early 80's and found him really friendly and helpful with some of the questions I had about Rickys. Even at that time--in the early years of playing--I found Rickys to have design idiosyncrasies that made them kind of "fussy" and tempramental. Like Scott, I learned that there WERE ways to get a lot of enjoyment out of my '64 330 and '79 4003, BUT they are unique creatures and I see Dave's points clearly. Shitty basses? I dunno. I loved mine and I played it A LOT. No troubles. But then again, I never put it through the ordeal Dave did on the road. Just local gigs. QUESTION FOR DAVE: Could it be that--unlike Fender or Gibson or, or...--Rickenbacker was and has been run by engineers and other techs with little player input as far as possible improvements/additions/changes are concerned?? I have found through professional experience that pure engineers and techs don't make for good craftsmen necessarily. One other thing: Paul Kantner of Jefferson Airplane/J. Starship was right. Flatwounds on the 6 and 12-stringers really do make a positive difference in tone and playablility. Guess what, Scott?? He only bought Ricky-brand flatwounds
" 'Cause it's important", he said.
Squire, Lee, McCartney, and thousands of others have used other brands and gauges of strings from roundwound and flatwounds and always got that Ric tone without Rickenbacker brand strings. I've used LaBella low tension flats, Rotosound swing bass rounds, DR Hi Beams rounds, Fender Flats, and at the end of the day, it still sounds like a Ric 4003 bass. It has more to do with the neck thru design, pickup placement on the body, and the low output single coils.
gutbucket , since my first response (two years ago) I have switched string brands (and gauges). I currently play Fender light bass strings....40 on G, .60 on D, .80 on A and .100 on E. The Rickenbacker loves this totally balanced set! I would highly recommend those Fender strings! Thanks.
I've had my Rick for many years and only use Rotosound and I'm always very pleased..give them a try!
@@billdickie6151 It’s been many years since I’ve used a set of Rotosounds- I’ll have to try them again, thank you.
This video should be made MANDATORY viewing for all Luthier students across the world.
This guy cracks me up. I can totally relate. I have done pro guitar repair for year. I can tell you, you WILL become jaded. It happens. When you do this for a long time, you will see how companies cut corners and how customers get ripped off by poorly engineered junk. If I made repairs videos, mine wouldn't be too much different.
I am just an amateur when it comes to guitars and basses (I do OK, and have put together some very nice Frankensteins), but this guy sounds exactly like me when I am working in my field of expertise (as an automotive technician). Engineers are always assholes, who always think their designs are brilliant, despite the obvious ways (at least to everyone else) in which they choose to defy all logic, common sense, and reason in their designs.
A talented bass player friend of mine in the mid 90's had a fondness for SOME of a RICK Bass. He would rout a Fender Bass for a Rick pickup.
I got the Rickenbacker 4001C64 McCartney model. I replaced the Rickenbacker bridge with the Hip Shot Bridge. The original bridge started to show tail lift. I bought another new one & it started to show lift again. I was very pissed off.
I finally read about the Hip Shot Bridge & all the compliments about it. Since I replaced that stupid Rick Bridge, I have been very happy. Not more tail lift. Problem solved. Love the bass.
Hey Dave, I had the good fortune to meet, and play music with Jimmy Barnes's nephew recently this year, he sounds a lot like Jimmy Barnes when he sings, really nice guy, very friendly.
This guy is hilarious! Good vid.
I owned and played a Rick for 3 years until I could unload it. Got a P Bass and loved it. Anyone who loves Ricks are more than welcome to them. I would take one for a gift and then would trade it for a Fender or Ibanez. I own an Ibanez fretless and it is a wonderful axe. Incredible in fact. Always get a kick out of you Dave!
I scrimped and saved for years, and was finally able to buy my own 4003 - such an exciting time!
Then the actual instrument arrived... It definitely had "that" sound, but from the very get-go it was riddled with neck problems.
The truss rods were maxed out, and the neck was STILL warped so far forward, I avoided playing above the 10th fret. Took it to two different luthiers over a year's time as the neck warp grew progressively worse, both of which were left scratching their heads, unwilling to tamp the truss rods down any further for fear of breaking them.
When the warping had reached a severity that was causing the fretboard finish to crack and flake off, I finally reached out to Rickenbacker, hoping that they would stand behind their product. Suffice it to say, they absolutely and unapologetically did NOT.
For the life of me, I cannot understand how a company can have NO shits to give when they manufacture and sell such an expensive, iconic product.
And that is why I will just take my chances with a knockoff from DHGate. I tried going the legit route, and if anything, the "Chickenbacker" will certainly be a far, FAR LESS expensive disappointment than the real thing...
Ok FIRSTLY, I love Rickenbacker guitars. But I love cranky old dudes even more. Thank you Dave. You made my day.
I don't get the comments. He's not making fun of your kids, is a bass and people have opinions. Oh well. Keep up the good work Dave - enjoyed it as always
Jesus this man is a lunatic! I like him.
Vince Whirlwind sounds like an alcoholic
This is probably my favorite Dave video out there... I love it!!
"it makes some mystical fucking tone" There you go, you made it
Dave, your story kinda touched me. It was 1977, I was 17 going to buy a Fender Jazz from Orlando Music in Florida. Went in and hung right beside my lovely Jazz was a Ricky bass. Stopped me dead in my tracks! Oh, I can't afford that one, oh same price, $414.00 huh... Damn, I liked it but had been dreaming of the Fender. Guess what I did... Grabbed the Jazz, hightailed it and never looked back! I always thought I might have made the wrong decision until I found your site Dave. The Jazz never let me down and I've never had any issues with it. It was a total snap decision forty years ago that worked out... luv ya Dave, carry on.
I too was able to play a friends Ricky piece of shitzkie. Bought a P Bass instead. No reason to look back.
Buddy Martin ...hi Buddy ...are from Illinois?
And I had a P bass, tried a Rick and have stuck with the Rick.
I do love that Rickenbacker/ SVT sound. Purity. I used to piss off our bass player by playing bridge pickup into the Legend Rock N Roll 50 I had, clean BAAOUMMM! BOOONNNG! Like a piano note. It was a great second bass track for adding harmonics, harmonics, harmonics! Never tried it on top of another kind of bass at the time, it was all I had to work with. I bet it would've lit up a muted P-bass sound.
I got both and they both sound and play good, in fact a Rickenbacker can sound a lot like a Jazz. Just cause Dave can't play a Ric doesn't mean that the vast majority of us can't play them, I love mine and so do the bands I use them in and yep you got it, I use an SVT, nothing like a Ric and an SVT, woops, there goes that wall!
Tell us how you really feel Dave... Don't sugar coat it..
Never owned an old Rickenbacker, but my 2022 4003 FG is bad ass. They have re-engineered the bridge, single truss rod and the tone us amazing.
I know some people only lime Fenders because they are the easiest bass to not suck at, but mastering a Ric is so worth the effort if you can.
LOL Tell us how you REALLY feel, Dave!😆 Entertaining and informative, as always. Thank you!
5:55 and on kills me.
True Canadian rage.
David Six yes,lmao😂😂you cant fake that.
a hard earned punch-in-the-face plus a free hug. (great value)
I love my ricky bass but I also like watching this dude scream about it
Dave. Buddy. Right on. Bought my 4001 in 1976 at 19 from the Music Shoppe in Thornhill. Cost me $600 cash with case.
Loved it. Loved it. Got it because my EBO neck snapped at the heel one night in rehearsal. I cried LOL. My first "real bass and it was broke in half!! Took it down to Joe Lado when he first opened 12th Fret on Kingston Road west of VP there. He fixed it but by then I'd lost the faith. My girlfriend and the guitarist kicked in $200 each as a loan and I found the other $200 to buy the Ricky. Loved it. But sold it all off with my Ampeg 4VB and two twin 15s to buy cameras for my new career. Sigh. Can't afford one now.
There... on the wall... hung a $1700 Rickenbacker and a $1500 Fender American P-Bass. For a second there, I thought about the buying the Rickenbacker... and then I walked out with the P-Bass. Life. Is. Good. Thanks for saving me the headaches Dave!
If I didn't already know my dad, this guy would be suspect.
I bought my first Rickenbacker back around 75 as well,I walked in a store and saw a beautiful black Rickenbacher hanging on the wall and I had the money and I fell in love with it so I bought it,I think it was around $895.00 and then I was out west in 1975 playing in clubs with it and I found out the intonation was out and that it couldn't be fixed,luckily I found a store out there that also sold Rickenbacher's so I traded my black one in on a brand new white Rickenbacher and only paid two hundred dollars for it,I played that white for the next forty years or so and finally got rid of it for $850.00,it wasn't white anymore,kind of a pee yellow color,chipped and I was tired of looking at it,I now have a rare white epiphone eb-3 bass that I got at a fairly decent price,I later found out that Paul McCartney's bass player also uses the same bass when he's required to play bass. Bob.
Is that an EBO L? I hate those gimpie short scale things. The L just feels fantastic (when you're not picking the headstock up off the floor all the time).
No it's long scale but it has a heavy neck,they're not expensive basses but I really couldn't afford anything expensive at the time and I found this limited edition EB-3 in white which is kind of unique and rare plus it looked pretty nice so I bought it knowing it would go probably go up in value due to there not being a lot of white EB-3's around. Bob.
Dave, nice review. Very honest. The action that you talked about is totally true. When i owned one, i could NEVER get the strings low enough. It was the reason i got rid of it. But just like you, I wanted to sound like Geddy Lee, Chris Squire, and the like that had that sound.
My brother had one and bought it because Paul McCartney played one during the 1970s. McCartney played the Rickenbocker begiinning with Revolver and then went to a Fender on the White Album and returned to the Hofner. When McCartney went solo, he played the Rickebocker again; during the 1970s that is.
Loool, I loved watching this, I love my 4003, but this was so funny, I love it. Youre right Dave the bridges are a bit pish, it works tho, ye its rough but it works. They are special, I know they get slagged (and some of it is deserved), its still a f~cking good bass, IMHO. What do you think they said to Lemmy said when he asked for strings? I can play metal on my ric, I can play slap on my ric, its got personality in spades, it's got a great neck that plays fast, it's not perfect, but its good in ways I don't know how to communicate if that makes sense... Did ric fire you or something? you just sound really bitter, I'm not saying your wrong, its just...I don't know......I'ts OK I hate random stuff too. ;)
YUP!...Youre a Democrap..
My first bass was a 4003 at age 16. I still have it and play it every day.
"I'd love to meet you and just punch you right in the face. I'd hug you afterwards but you get a punch in the face just because."
Best gear reviewer ever, that bridge design is cumbersome. Thanks.
I own a 76 Rickenbacker bass and have played it for forty years.I bought it used in 79. I always used Dean Markley half round half ground strings on it. Sounds like rotosound string as they are round wound over the pick ups but plays like flat wound strings where they are ground smooth over the frets. Never needed a fret job in forty years and always loved the sound.
No other bass can sound like a Rick. Deep and mellow or bright and crisp...if you want, both at the same time. I always bi amped the stereo output.
I could take this bass out of the case after being at 10 below zero and while other guitarists would take an hour to get their guitars in stable tune. I would just check it and it was always in tune.
In forty years I never had to adjust the truss rods, string height, or intonation.I played it hard, slapping popping and aggressive pick playing...I NEVER broke a string.
Dave's story makes no sense to me. I can only imagine that there must be more to the story that he is not telling.
I don't know if people tell you this a lot, but you have a really great speaking voice! Very relaxed and warm
One of the best basses I've ever owned was a fretless Rick. Superb instrument. My ex-buddy thought so too. He stole it.
Guess he wanted it more than you did lol
A guy in my local bass shop made the point that those basses sound better with pick and when playing chords. Basically you have to play like McCartney or Lemmy.
Yeah rics sound best with picks, I thought that was common knowledge.
Brie Russell someone forgot to tell Geddy Lee that
I bough a brand new 2021 - I think it was the first year of hte single truss rod. Thick D shaped neck. The frets were all uneven and the nut was so badly shapped. Glue seepage in the finger board. The neck was set too high and even wtih the bridge bottomed out, I can only get 6/64 on the e string. The ONLY brand new instrument I ever bought and needed the most work to get right.
I absolutely love the commentary on this channel, and particularly about the Rickenbacker basses. I finally threw in the towel and bought a Fender American Pro II Precision Bass, which is light years ahead in performance and tone without the BS of the 'Rick'. Next on the list is the Fender American Pro II Jazz Bass, just because. Cheers!
Cool, thanks!
8:05 "This is a really distinctive tone compared to all other basses I pluged in to this little amp". Well... there you go then! hahahahah
That's the point. Idiot admits it after dissing it. To work on a Ric, you have to be a wee bit smarter then a Ric. Kind of like training a dog.
@@gutbucket260 any bass can sound like that. They're still overpriced garbage
@@gutbucket260 your point is valid until you're charged $2k for a badly designed bass that's gonna cost you quite a bit in aftermarket parts
I thin Ive watched this a dozen times and its still funny
back for more laughs, 10th time watching lol
I posted a Craigslist ad to sell a custom made 5 string bass. Long story short, the dude that showed up told me this sad story about how he just had a deal on a Rickenbacker fall through. I showed him mine, he fell in love and gave me 80% of what I paid for it new. So glad that gooched fucking thing is out of my life. What do I play now? A 2014 American Standard Precision! Peace!
Oooooo enjoy those american standards, they're solid.
That was superb! Laughed my ass off. I thought I was the only one that cursed that much at string planks whilst working on them. The Geddy Lee ditty was just the icing on the cake...
My favorite bass player played a ric his whole career. Chris squire
Ian Viereck I was gonna mention Chris Squire but I figured someone beat me to it lol
Ian Viereck yup
@alterdestiny No; actually Ian spelled it correctly. The "Squier" spelling is for Billy Squier and also Squier musical instruments.
Someone's been drinking!!!!!!!
Tammi Avery - good, keep us posted.
Came home drunk ready to beat his bass guitar
ikr. Would you take your instrument to this guy to 'fix'? Not a snowflake's chance in hell I would.
Well that's you your prerogative Martin. As much as it is a subjective thing, I don't hear any humour, mostly some bitterness. irrespective of whether he knows what he is doing, my impression from this particular video is that there is someone who probably should not be handling instruments with sharp(ish) tools around them. My luthier is a thorough professional and would never compromise my instrument, something the person in this video does not appear to demonstrate.
If you choose to ignore that, then that is also your prerogative. Cheers.
You have a PERSONAL LUTHIER? I was under the impression that luthiers BUILD instruments where "guitar techs" are the guys who do work on them. If you have someone else - by any name - doing the "work" on a relatively simple machine like a guitar, then you're probably not qualified to be judging anyone who can work on his own instruments, drunk or sober.
What a fantastic story. I feel like I was there! That was twice the price of a Precision in '75. (I never warmed to Ricks feel.) Too slick. Coated fingerboard, indeed!
Thanks for the support
I'd hate to see how pissed he would be if he had to adjust the neck on an actual vintage Rick 4001. In order to straighten the neck on those bastards, you needed to carefully manipulate it with your hands, THEN lock it into place using the 'hairpin folded' truss rod.
Also, its safe to use Rotosounds Swing bass strings on reissue 4003s. Only the vintage ones (made prior to 1986) had that unfortunate issue with them 'eating' the frets and consequently wearing down the neck over time.
Otherwise, very entertaining post. Incidentally, I am the proud owner of a reissue Fireglo 4003 for the past two years. No buyers remorse for me, except for the fact that the truss rod wrench wasn't included with the bass (its sold separately).
This is timeless peak Dave.
Interestingly Dave, I have the newer 2015 version of the RIC 4001. Most of the neck adjustment issues, nasal output issues, fret hardness, etc have been fixed in the later models. I know you won't forgive. LOL. I have a few RIC guitars too... the 360, and the 330/12. Fidgety setups... Yep! The sound and feel is something I really like.
On the Flip side, I don't own any Fender guitars... I have Gibsons, RIC, and Gretsch and Peavey. I don't "hate" Fender stuff, it's just not my style.
Dave got burned by a RIC that drove him bonkers... and I get that. I find that Gibson SG's will drive a tech mad... more so than any other I've worked on.
Mine has shallow slots on the bridge... Individual saddle height and non-hidden adjustment screws would make the tech's world and easier place. However non-techs are all about how it looks... not how it works. Sales vs. Service. There's always that Amp that sounded great, but now it needs work and we all send sympathy cards to the repair technician.
I'll be 100% honest... I've never gotten a guitar from the factory that was set up to my satisfaction... so I worked them ALL over.... Two of my RICs were high at the 1st fret.... Now I like them better.
Gibson's adjustable Zero Fret is SUPER!... Love that idea. Have you seen those? Introduced in about 2015.
DeadKoby Had 2 SGs. Tuning nightmares. Sold both. Bought Korean made PRS Santana model. Awesome axe.
My current SG isn't too poorly behaved, but by comparison, the LP is better.
If I could like this most more than once, I'd upvote it a thousand times.
I'm always relieved when I show up to a gig and the bass player is not playing a rick. I'm always happy to see a fender though. I also own both the rick 360 and 330/12 guitars. The design is a PIA but they sound amazing through my ac30. That being said, I think ricks in general are just one trick ponies. I can only use them on a couple of songs before switching to my SG. Unfortunately, my SG has recently acquired a gibson smile.
Love your vid! Love the points you make but I also love my 4003.
Mine sounds so gnarly and without fail I get compliments at shows on my “cool bass”.
I can relate, I traded a strat for a a 4001 in 1978, first thing I did was chuck the tailpiece and my brother installed a Bad Ass bridge, then a couple year later I had the frets replaced for bigger ones and and that crappy fret board finish sanded off, I also had the pick-ups rewound to make it a little hotter. The picture that got me was Getty Lee......lol
Dave I own over 30 basses... and my number one that I play almost exclusively, is my 4003W walnut body, maple fret board. And I put whatever strings I want on it. BTW the magic tone comes from those hollow partial surrounds that pop up on either side of the strings at the bridge and there's no beating them in my book. So basically what I'm saying is, each to their own. And hey.... at least they don't have a Japanese or Mexican division. Dude, I own many Fenders, Gibsons and others but I always say....Rics rule!
RIP CLIFF BURTON
Yeah and Geddys sound went from amazing to near none existent.
gregg4164 I bet you think Moving Pictures was recorded on a Ric.
Caleb Angell most of it was. Tom Sawyer was recorded with his jazz
I've read that Geddy himself has said that he used his
Rickenbacker on 3 tracks from "Moving Pictures": "Red Barchetta," "The Camera Eye," and "Limelight." The rest were the Fender Jazz.
The RIC tone on Red Barchetta is beautiful and unmistakable, but you're right about the jazz bass taking most of the limelight. They're by far easier to play, but seeing someone play a RIC is like seeing someone driving a classic car... You always want to see it again.
Geddy always sounds like Geddy, no matter what's he's playing. I saw him play with Yes at the RRHoF induction. He played a J, but totally nailed Chris Squire's tone.
Cool snatch of Anthem at the end 😎
I bought a Ricky 2 years ago ,wanted one for over 40 years and I finally had a couple of grand to spend . I brought my new bass home and set it up . Where was that sound ,that Yes had years ago . It wasn't there .I played the bass for a couple of days and it went right back to Guitar Center ,where it belonged ,on a rack .
i played a 74 4001 that i paid three bags of pot for (case not included).... i loved it played through an svt with 8 10's and 15 reflex cab
Dave...you sound a little jaded...ha
I bought a brand new Rickenbacker for $495 in the US in 1981. I had it and played it regularly for 8 years with no issues. I also used Roto Sounds. Maybe they cost more in Canada? I think Dave bought a lemon and may need some therapy for his Rickophobia? LOL!
czcams.com/video/dXIQFTi3-4M/video.html
I was fond of my IMITATION Ricky - but it DID only cost 50.oo (UK) ;)
He didn't say that playing it was an issue, He said that setting it up was an issue. I suppose that if you never set it up in 8 years, you would be fine.
Thank you for this honest assessment, the story of your first and last Rickenbacker and last but not least, the circus song at 12:24!...For the first time ever, I just laughed myself out of wanting an instrument!!
Built like a 60' British sports car - drive it during the week and work on it all weekend. This is hysterical. Played one of these at a jam and it was no big deal. Chris Squire played one and sounded great
but he would sound great paying a Squire or a potato.