LizardSkin Sound Insulation Demonstration
Vložit
- čas přidán 14. 02. 2016
- In this LizardSkin Demonstration, watch as Marx shows you the proper way to apply LizardSkin Sound Control Insulation or the Original Ceramic Insulation using the Lizard Skin spray gun Kits:
LizardSkin Sound Control Insulation: www.summitracing.com/search/pr...
LizardSkin Spray Gun Kits: www.summitracing.com/search/pr...
LizardSkin Original Ceramic Insulation: www.summitracing.com/search/pr... - Auta a dopravní prostředky
so glad they didnt cut out that struggle with the air hose connection, made my day
joseph martinez
Yeah, 500 psi will do that to ya Bro.
It would have been good for us to see a before and after demonstration so we could hear the sound difference
You know those God Level workers videos? This guy is God Level pouring. That was...insane.
Why didnt you just paint whole thing and show how it sounded afterwards?
Yeah, amazing they didn't do it what way, I mean, what the hell else is a sound deadener meant for, lets call it a demonstration and not dmeonstrate how it deadens sound, hahaha
no before or after noise and heat test
Very nice, I will be getting some of this
NO LIZARDS WERE HURT IN THIS DEMONSTRATION
So I guess I'm supposed to just take your word for it that the stuff works? This reminds me of when back in the day spray on window tint existed. It was a shit ton of prep work and made a huge mess.
how does this compare with the eastwood sound barriers? shots fired.
I have a question. How effective would this be (in the wheel wells) at reading the sound of tires?
Where is the before and after sound test??
So which part of this video demonstrating sound insulation, actually demonstrates sound insulation?
You would have thought after two years of complaints ,about not demonstrating the finish product, they would have corrected the complaints. So, I must assume the product sucks and they don't want to show how poor it works.
Will this bond to aluminum? I’m sure scuffing and etching primer is needed
Can I brush it ON..??
Incomplete video. What is the other part. Where is the effectiveness test ??? Come on people make us understand and WANT to buy whatever you are trying to advertise !
Amazing POURING skills
You need tons of air pressure to push those materials.
Annnnnnd no mention of recommended pressure for the gun....? 10 PSI, 100 PSI...??
wonderin whatsup 70
The instructions from the company say NMT 80 psi
9000 psi
@@trashy10 works well for blasting holes through solid steel...
What's the recommendation for prepping the panel prior to shooting the Lizard Skin or is it OK to shoot it OD like the military does? For those of you non-military types OD actually stands for "over dirt".
What you are shooting should be fairly clean. Here is a link to their instructions.
lizardskin.com/wp-content/uploads/2019/05/lizardskin-application-instructions.pdf
What about engine parts
Pretty expensive stuff. I've just been to the web site. I don't see a kit. All appears to be individually priced. I want to know if this insulation spray & sound proof spray falls apart after years like the cheap spray foam from home depot. Has anyone done a conversion van with this installed that can testify to the value of your product? I am 75 years old trying to convert a low ram 1500 promaster. I have no time to waste or money to waste, as I look forward to my first see the country in my land yacht trip as soon as new home complete. I have always flown over our country before, or speeded through to reach destination hotel. Trying to get another thing off my check list, grandson says bucket list.
Did you decide on your sound deadening planning to use this stuff for a van as well
It seems like with dynamat or Zmat or Hushmat would be quicker and just as effective. Please inform me of why your product is better? Thanks.
dynamat and even more so the similar cheaper products have a hot asphalt in august smell,
if you like the smell of a tar pit inside your car that reminds you of freshly laid hot asphalt then
you want the cheap dynomat stuff
@@trillrifaxegrindor4411 you’re a fuckin moron. Dynamat has NO asphalt. It’s the number one rated sound treatment for a reason. You’re thinking of roof flashing.
can it be brushed on?
Hi BIG Chris,
The manufacturer does not recommend brushing or rolling due to the dampening particles depositing (clinging) to the roller rather than the panel being coated. For proper coverage and usage, it is best to use a spray gun as per instructions!
brush,comb,hot roller SUUUUUUURE whatever you like
Does the "gun" come with it?
Victor Treloar Yes it's a entire kit you can buy
how much would a kit run, I have a 84 astro van to spray complete interior coverage. will one coat do it.
Nah, but the Poofter holding it does😍🕺🏼
Where's the demonstration? This is latex house paint people.
didn't show sound difference THUMBS DOWN
How do you know they are there?did they just tell you?do you believe every thing they tell you?lol
Summit Racing!
I would pull this video based on any liability//safety issue.
Although informative, WHERE IS THIS GUY'S PPE?
Your spraying chemicals, sticky ones at that.
No eye protection?
No ear protection?
No head or face protection?
No mouth/lung protection?
And then putting this on the internet?
You must have the best legal team in the World!
MJ
they are men...relax
It’s water based product no chems