Polaris RZR Ball Joint Replacement | 2015 RZR 900S | Partzilla.com
Vložit
- čas přidán 22. 08. 2024
- Get everything you need for your RZR ball joint replacement: bit.ly/rxr-ball...
See how to perform a lower ball joint replacement on a Polaris RZR 900S in this video from Partzilla.com. If you get a tear in the boot that protects the ball joint, contaminants can get in and quickly damage the joint. Fortunately, replacing the lower ball joint in the Polaris RZR is fairly simple. We’ll start by removing the wheel so that we can disconnect the lower ball joint and the lower control arm. Next, we’ll use a press to remove the old ball joint from the control arm and install the new joint in the control arm. Then we’ll replace the control arm on the RZR and finish up by installing the wheel.
Read how to do this job step by step: www.partzilla....
Looking for more maintenance on your RZR? Here’s how to replace the wheel bearings:
• Polaris RZR Wheel Bear...
VIDEO HIGHLIGHTS:
Removing the lower control arm - 1:10
Removing the old ball joint - 3:10
Installing the new ball joint - 3:35
Reconnecting the lower control arm - 4:09
Reinstalling the wheel - 5:40
Find OEM Polaris RZR 900S parts and exploded diagrams here at Partzilla.com:
www.partzilla....
Talk to us:
Twitter: / partzilla
Facebook: / partzilla
Instagram: / partzilla
In the video we’re working with a 2015 Polaris RZR 900S. You may have similar steps on your machine. If you’re not sure whether these steps apply to your vehicle, leave a comment and we’ll get back to you.
RELATED CONTENT:
Replacing the CV boots on the Polaris RZR:
• Polaris RZR CV Boot Re...
Polaris RZR front brake pad replacement:
• How to Change Polaris ...
Super helpful. I just realized my upper ball joint had some slop and this task looks easier than i anticipated. Thanks for making this video
Man your shop is as clean as a hospital OR!! Great videos
We make the interns clean everything with Qtips! (Jeez, I wish we had interns now.)
Great video can you show a video on how to change the boot on the steering please. I have a 2015 Polaris ranger crew 900.
Great video! Could have put that front lower a-arm bolt back in from the rear. Might have saved ya some time next time. Lol
Great video. Well done.
Great video!!
Berry nice like everything you do tks for the tips
Have you ever used a manual hand held c-clamp style ball joint press?
None of this went near as smooth as it did in this video
Does that go for the basic 800 trail to
Hey man I have a 2012 Rzr 800, I had A LOT of slop/play between the ball joint and the spindle. I’ve ordered replacement parts for both but I cannot find the exact pinch bolt I’m suppose to use. Do you have a part number or the exact size or anything that can help. Any info is appreciated thank you !
Here is the diagram for the front arms. Not sure which bolt you are referring to.
www.partzilla.com/catalog/polaris/side-by-side/2012/rzr-800-efi-eps-r12vh76ab-ad-af-ah-ai-aj-am-eab-eas/suspension-front-control-arms
i am rebuilding a Yamaha tt600 1983 and it has piston slap i measured the bore and its in speck and the piston is too, there is not any bent con rods but the bottom end bearing arnt the best what can i do?
Basic rule of thumb, if you're already in the area, replace the bearings, no reason not to if they "aren't the best."
Mine aren’t just sliding back into place like that.... PLEASE HELP!!!!!
Are you pressing them in?