Velikost videa: 1280 X 720853 X 480640 X 360
Zobrazit ovladače přehrávání
Automatické přehrávání
Přehrát
Does anyone know will a Yamaha timberwolf rear brake dum fit a Yamaha bear tracker rear brake dum
you don't file the brakes!! you back off the brake adjustment cable. then readjust it. that easy.
nice vid hope we can ride soon Lucas
how about replacing the starter on the same 4 wheeler. mine needs to be replaced but its a 1987 model
What year is it
I bought a timberwolf 250 today was told brakes were weak.got it home bought new pads and put them on brakes still not extracting out enough to touch brake hub even after adjusting what else can I do to get brakes working
Hey Mike I need help with this too. Did you ever figure it out?
I have the same issue.
Slide the adjuster off and twist the tooth thing until it catches the hub and put your adjuster on their
Is changing the front the same as the back?
Tim Raymond 😂 like minds
thanks! now how do I do the front brakes?
just use the gears
Disc brakes on front
dont think you should have filed down th breaks i think you needed to loosen the tension on the breaks
My nut on the bolt with the pin through it will not come off it is on tight
get a small blow torch (walmart sells them) and try to heat it up
well the drum is stuck on for mine, cant get it off
Hello there same thing on my atv mate any luck getting it off ?
Spray some wd40 around that thing and lightly peck around it with hammer
1996 Yamaha Timberwolf
Does anyone know will a Yamaha timberwolf rear brake dum fit a Yamaha bear tracker rear brake dum
you don't file the brakes!! you back off the brake adjustment cable. then readjust it. that easy.
nice vid hope we can ride soon
Lucas
how about replacing the starter on the same 4 wheeler. mine needs to be replaced but its a 1987 model
What year is it
I bought a timberwolf 250 today was told brakes were weak.got it home bought new pads and put them on brakes still not extracting out enough to touch brake hub even after adjusting what else can I do to get brakes working
Hey Mike I need help with this too. Did you ever figure it out?
I have the same issue.
Slide the adjuster off and twist the tooth thing until it catches the hub and put your adjuster on their
Is changing the front the same as the back?
Tim Raymond 😂 like minds
thanks! now how do I do the front brakes?
just use the gears
Disc brakes on front
dont think you should have filed down th breaks i think you needed to loosen the tension on the breaks
My nut on the bolt with the pin through it will not come off it is on tight
get a small blow torch (walmart sells them) and try to heat it up
well the drum is stuck on for mine, cant get it off
Hello there same thing on my atv mate any luck getting it off ?
Spray some wd40 around that thing and lightly peck around it with hammer
1996 Yamaha Timberwolf