KC TURBOS DIY STAGE 2 TURBO 6.0 PPOWERSTROKE
Vložit
- čas přidán 15. 05. 2021
- In this video we utilize a stock 03 turbo that had some carnage and bring the life back into it with KC Turbos diy turbo kit.
Starting with the base 03 turbo, we reused the center section and exhaust housing(with unison ring and vanes). Then utilizing kc turbos 64.7mm compressor wheel and 10 blade balanced assembly, 360 thrust rebuild kit, and their machined compressor housing and backing plate, this turbo will be amazing! This is as close as you can get to an actually kc stage 2 turbo! Then we install it on THE DAILY and do a couple of sound clips!
KC TURBKS DIY KIT
kcturbos.com/556d2
HOW TO REBUILD A 6.0 TURBO
• KC TURBO UPGRADE!! SO ...
LIKE SHARE COMMENT SUBSCRIBE
VISIT THE WEBSITE!
leftlanediesels.com/
BECOME A PATRON
/ leftlanediesels
FOLLOW ME ON INSTAGRAM
left_lane_cbull
Song: NOX-Invasion
Keywords
Race truck
Rolling coal
Built diesel
Stanced out
Cammed out
Hood stack
Straight piped
Loud turbo
Big turbo
Twin turbo
Loud exhaust
Kc turbos
Ported intake
No limit
6.0 powerstroke
Cummins diesel
12 valve
Duramax diesel
Huge burnout - Auta a dopravní prostředky
i have this turbo setup on my 04 motor. except ive got the 9 blade exhaust side. compressor is a billet whistle wheel. it sounds amazing through and through
Nothing sounds better than a 6.0
AGREED!!!!! 🇺🇸🇺🇸
🎶🎶🎶🎶🎶🎶🎶🎶🎶
That truck sounds Fantastic!! great work on the video and install!
Hey guys this is Charlie I have a clean sonic blue ,no mods, 2003 6.0 turbo diesel with stock everything . Honestly I don't want to break the bank but I just want to make the truck a little tougher. I do tree work! But ,I do want to show my office on wheels off. #1 am I able to just rebuild my turbo to get the same effect with a truck with balls and a 4-in exhaust. #2 stylish headlights without having the cut under the hood to fit in the $200 range. I would appreciate some feedback. Ty
Such a beautiful sweet whistle your 6.0 has buddy!
KC Turbos are the way to go in my book! Saving up for a stage 2 for my ‘05 F350 6.0 SRW now.
Dropping a like cuz left lane diesel!
💪💪💪💪
Sounds great left lane diesel!!!
I'm putting a 2005 6.0 in my 81 f250, was a 400 6.6. I have alot of work ahead of me, but your videos make my life easier on most of the work. I have a mess of electrical work to do, but I have a whole donor truck so it's just splicing here and there.
Nice! That’ll be a fun project. Check out warren diesels stand alone harness.
I’m doing the same Andy. 1986 ford. I have videos on my channel.
@@LukesGarage cool, I'll check you out
@@LeftLaneDiesels I might be swapping out dashes also, not sure yet
@12:46 sound like she sure did like it lol. thanks for sharing
Sure liked the Schaeffer Banner
Man I wish they had this kit in stock when I rebuilt my turbo with the 10 blade 2 years ago
Your good at what you do man that for sure but am glad I don’t live up there in the salt belt
Salt belt sucks!! Lol
@@LeftLaneDiesels that daily truck still nice looking truck I like the front end on it
@@rickketchumn4458 thanks! More things to come for the exterior
So you need a machined compressor housing? I am glad I just watched this video before I removed the turbo and started the rebuild.
Dude I wish you were in California. I’m getting ready to do my first rebuild. I’m gonna watch your videos on the rebuild like 50 more times before I start 😂😂😂😂. I’m changing the solenoid also. Do you have any videos on that part as well?
Si whats better get a kit stage 2 or buy the actual turbo ? And do i need New tune to run this kit or turbo ?
Question...does the new set up give you more boost?? I know it spools faster and everything, but I can find anywhere about if it pushes more boost like a drop in kc stage 2 or 3?
Hi guys,just wandering if I can put a gas engine in my 2006 f250and what would be the easiest way to go?
6.0 engines cost around 4k no ? Just saying, its a 06 f250
Y the white smoke ? I just rebuilt my engine I never get white smoke at cold start
Is there a difference between doing the rebuild and buying the dropping the stage 2 whistler drop in. Just curious because you said it was a 500-515 whp but the drop in says it’s 600whp capable. Unless I’m wrong tho these utilize the same turbine and compressor wheel size. The only difference is the compressor housing.
How did u get the new compressor cover? Are they available without buying a whole turbo?
Should I trade my 2nd gen dodge 24v with a 5 speed for a 6.0 power stroke that has a rebuilt engine and transmission?
Nope
I cant find your link to the stage II DIY 03 Turbo upgrade kit? Is it still available?
Look in the description of the video. The link is there and that will take you to the product.
What size is the 2004 exhaust side wheel?
Stupid question, but does it still make the usual 6.0 turbo flutter or is that gone since the silencer ring is gone?
Will this work for me have a brand new 03 turbo on my 07
Yes absolutely! Use my link in the description!
Is there noticeably more lag? I recently bought a 6.0 with a drop in stage 2 and it’s pretty laggy
What tunes do u recommend
Would I get better fuel mileage with that setup?
How much increase in power was you able to gain. With your diy injector upgrade?
The truck should be sitting at 500-515rwhp.
Normally a stock injector/turbo 6.0 with a hot tune will be around 430-450rwhp.
@@LeftLaneDiesels that’s great, how much would you charge to do this to 8 injectors? Keeping in mind doing it at my own risk?
@@LeftLaneDiesels do you think my stage 2 cam will make a huge difference on HP I had a lifter failure on my truck which is an 05 and it destroyed the cam so I just went stage 2 haven't heard alot of people do it or at least people not saying if it makes a difference at all i did rebuilt it a year ago and left a headbolt tune for now but do you think a custom tune for the cam will make a difference over just a basic headstud tune?
I've also raced guys claiming 550 hp and beat them i get that I have a single cab long bed xl 4wd but I also keep up with one of my coworkers camaro ss that's tuned and cold air etc who has dyno sheets of 450 hp at the wheel and my big heavy truck won't lose to it and I've raced the new 5.0 mustangs and have pulled away from them too so idk how much HP im making but some are saying im probably around 500 crank hp easily even other 6.0s I've raced with hot tunes cant beat my truck and I only have a basic tune on it and a stage 2 cam is all stock 03 turbo and injectors
Did the 155/30% injector build work good?
Working great so far! No issues, and they were in the truck for this video
Awesome man
Did you notice any difference in power?
And where did you get the brass ball bearings?
Any up-pipes available??
Up-pipes will be back in stock on May 31st
How did those injectors you built turn out ?
Came out great, they are in the truck for the video! No issues at all, truck is tuned for them, as well as a ficm tune.
@@LeftLaneDiesels how did you tune ficm
@@altitudeproductions5179 php
@@altitudeproductions5179 not php, I have a different guy I use
I'm a bit confused about FICM tunning. Do FICM tunes cancel out or interrupt OBDII custom tunning? Or they work together? I'm uneducated on this one.
What’s it making with this setup
500-515rwhp
Whats your day job?
Would it be cheaper for me to go with a actual kc turbo ready to go or get a 03 and get that kc kit?? My truck is a 2007 6.0....
Im curious aswell, my turbo just went bad and im trying to figure out if the blade alone provides more horses in the stock turbo or if the whole kc turbo gives you more horses, i want to make a smart decision
@@i.dh1584 yea I'm thinking it might just be more convenient to get a drop in ready kc turbo
First
defently not a vid to try learn how to install