BMW TRAILER HITCH INSTALLATION! Full DIY With Wiring And Bumper Modifications BMW X3 G01
Vložit
- čas přidán 13. 08. 2022
- If you want add a trailer hitch to your BMW X3 GO1 then this is the video for you! I show you how to complete the TRAILER HITCH INSTALLATION from Start To Finish! This tutorial included how to remove the rear bumper, tail lights, install the hitch, install the wiring harness and module, and modifying the rear bumper!
Make sure to check with your local dealer using your VIN number to verify you are getting the correct parts for your BMW as trim and options can vary by vehicle. - Auta a dopravní prostředky
Very good job thank you for info
You are welcome!
Great install. Thanks for sharing.
Your welcome Mike!
Great info here. Thanks!
Thanks Brian!
Beauty!
Nicely done, boys.
You made it look easy.
I tried my manual rivet tool on those trim fasteners but I didn’t have an attachment with the right sized opening for the pin!
E84 wheel arch trim, btw.
This was a fun project to share. I think many people now realize why the dealer charges what they do for this repair.
@@AskTheCarExperts And you two were like a well oiled machine doing that swap 👍🏻
@@AskTheCarExperts
Thank you for Nice, easy, smarty installation video. 🙏💪🏻 Could you please help me maybe with the link for shop where I can get same electric hitch but for 7 series F01 2013?
Will Much appriechate. 😊
Excellent video guys. I’ve been thinking of doing this on my 2018 X3. My biggest worry would be not recalling which bolts go where while reinstalling everything. :)
That is a nice hitch and wiring setup though.
One good method is to use some baggies and write down where they came from. Or take some picture with your phone. Tue install is not too bad overall.
@@AskTheCarExperts Thanks for the suggestion.
hello. I buy a 2022 BMW x5, can I install this one? I went to the 4S and they said no?
I am pretty confident it would be available through a dealer. You need them to look it up by VIN
Great video!!! What’s the wiring harness part number please??
It does depend on the year of the vehicle. The best thing to do would be to call your local dealer for the part number looked up using your VIN
Hey I need some help about my bmw323ci. My car turns, but there is no throttle. It turns doesn't even start. When I spray fuel starter into the intake tube it starts force seconds then shuts off. Do you think the throttle body is clogged?? I've replaced the fuel pump but nothing happend.
Hi Daniel, This sounds like you are not getting fuel. If you spray into the throttle the vehicle is using the spray as fuel and starting. I would check fuel pressure to verify but it sounds like it could be a bad fuel pump.
Would you happen to know if such DIY installation could void 'Certified Pre-Owned' waranty?
Hi Maciek, No using OEM parts would not void your warranty. The CPO would not cover the hitch but normal CPO covered items would still be covered.
Hi, where did you get that molding for the bumper ,from the dealer ?because I didn’t have that included in the package .Just trailer hitch,module ,harness wires.
Hello, Yes all of these items where dealer ordered. The molding was not listed in the main instructions but was in the parts manual.
Hi, thank you very much for that. Do you know maybe the name of that part? How or part number do I need two moldings or one?
Could you please list parts number in description or comments? Especially wiring harness as it is not good viable on video ?
Part numbers can vary depending on vehicle options. Your best bet would be to call your local dealer with your VIN to get the part number for your BMW.
cant you find a way to keep the kick feature , as the sensor is small cant be fit to the right
Hi Osman, Not sure if that would be possible but I would be worried that it may trigger when you would not want it to. Like if a bike rack was installed. Could cause damage.
cant you keep the kick feature by placing the sensor to the right with a custom fitment?
You could try but it usually is not enough to break the field. Also you wouldn't want it to accidentally activate when you don't want it to such as a biike rack installed.
Where did you get hitch and harness? And how much was it?? Thanks ))))
Hi Andy, It was purchased from my local dealer.
@@AskTheCarExperts I see, what was the cost of everything?
@@Anderwist That would be the cost at your local dealer. Not cheap :) 😀