The Pokémon GO Plus + Just Got Better
Vložit
- čas přidán 2. 07. 2024
- Here's a link to everything you need to get started!
Pokémon GO Plus +
www.target.com/p/pok-233-mon-...
Soldering Iron:
www.amazon.com/YIHUA-Solderin...
Switches:
www.amazon.com/product-review...
Wire:
www.amazon.com/product-review...
I hope this video gets as many views as it deserves, cuz its fricking awesome. I'm wondering if there's a way to modify the vibration to add a toggle instead of removing the vibrating entirely...
Thank you so much!!
Good question about vibration. I have tried to leave it connected while adding the switch- and it went crazy lol. Pretty much would not stop vibrating.
If I find anything out- I’ll be sure to update you!!
Thank you again for your support!!
Oh dear... It sounds like you were connecting the button test point to the motor wire cold. This should vibrate when button is pressed and the button light is on. I don't think this causes damage however, I would not recommend finding this out the hard way. If you want to keep the motor, follow the guide I posted in the comments. I've done this mod a decent few times. Modded two for myself and maybe 4 or 5 others.
Use 3 pin switch. black motor to the middle, left to the red motor, right to the test point. So you'll have 2 mode, auto without vibration, manual with vibration. I tend to leave the back cable intact and put the red cable disconnected.
You don't want to connect motor wire cold to button test point. Motor cold on test point causes motor to engage on button press/hold when light is on.
This guy popped up from nowhere but is the guy everyone needs!!!!
@@AlexHatcher thank you Alex!!! As someone who is just getting in to the pogo content game, you have no idea how much that means to me
@@POGObiWann of course man! Sending love from the UK, looking forward to some more videos, subbed with notifs on! :)))
Fr
One detail with this mod. You can keep motor when full auto is on. Keep the three pins and connect button test point to left pin (or whichever is your switch on). Next connect your motor cold wire to right pin (or whichever is your switch off). This wire will have to be extended. It's not too difficult, just have a clamp or something to hold motor wire in place. Next, connect the motor cold pad to center pin. When off, the motor should work and not when on. If motor works when pressing the button with light on, you connected motor wire cold to button test point. Don't do that.
Optional, you can remove the speaker because Pikachu sounds like he either has a cold or is dying due to speaker not being directed out. No point in keeping it. My recommendation is to tin the tip of your iron and drag the iron across both points. Don't let the iron touch other components or pads when doing this! When freed, the speaker wires should lift up on their own. The pads can be left tinned as long as the solder between the two pins are not connected to each other or other components.
When soldering, it helps to have flux when removing extra solder and use something to capture the smoke or be in a well ventilated area (eg: outside). When de-soldering, be patient, make sure temperature is right, and don't leave the iron on too long if it is not de-soldering. You may damage the board or nearby components if not careful which will result in a non-functional main board or top board. Also be weary when holding the soldering iron above the board when with solder in unnecessary situations. You could drop some solder when using excess amounts and put yourself in a difficult situation to salvage (without the correct equipment and skill). Happy soldering and be safe!
*Needed components:*
- *1x* Soldering station (Can be cheap however, you want one with temp controls)
- *1x* solder fume extractor/absorber (Optional if done outside)
- *3x* thin wires (Can be obtained from an old USB cable. They must be very thin and easy to bend)
- *1x* Heat resistant tape (Kapton or Polyimide) or substitute with heat shrink. However, the thin wires will make it difficult. Just use the tape, it works.
- *_x* hot glue (If you can measure and design a 3D printable bracket for the switch, PLEASE REPLY! I hate condoning the use of hot glue in mods. If controlled, it works however I still hate it.
- *1x* switch (Can purchase off of AliExpress. Use the below string to get what you need in the first result. This is what I use. If you use 5MM, you will have to lightly trim and sand down.)
AliExpress search: "20Pcs SS12D00 Interruptor on-off mini Slide Switch 3pin 1P2T 2 Position High quality toggle switch Handle length:3MM/4MM/5MM/6MM"
Thank you so much for taking the time to put this all together!!
I am definitely no expert but the next time I do one of these, I’m gonna go step by step!
Thought about a 3D printed enclosure for the switch as well too. I don’t own a 3D printer but my friend does. I’ll see if I can work with him and we can get them made!
You should totally make a video of you doing this!! :)
YES PLEASE!!! I hate using hot glue. It is a very messy solution...
One other thing. I just wrote a paper on the structure and features of search strings. Do you possibly want it? It was supposed to be a beginners guide, however it turned into a basic lexicographical analysis a important features. It's four pages. XD
Your Pokémon GO content is truly top-notch! The way you share tips, and updates is engaging and incredibly helpful. Keep up the fantastic work!
@@MrJoel2010 thank you so much!!!!
This is one of my new favorite CZcamsr’s, keep up the good work! :D
Thank you for your support, Salty!!! Wouldn’t be doing this if it weren’t for people like you ❤️
Thanks for making this video. its by far the cleanest of the plus mod videos out there. Don't have a soldering iron, but might have to get one just for this.
Just one warning... DO NOT use Mom's fabric scissors on the wires. 🤣😂🤣😂🤣. Hope you had a great Go Fest.
@@rismyth1 🤣🤣 it was all I had…. Sometimes you gotta get by with what you got!! (Sorry mom)
Thank you!!!!
Your a life saver literally have wanted this forever now
Did this a few months ago and it is the BEST
Such a game changer!!!
With the plus running all the time, when you run out of pokeballs, you can just switch to greats and start farming them back up!!! Love not having to press the button!
Thank you for commenting!!! I really appreciate it
Wow, you only have 388 subscribers? I'm amazed. You deserve to have more than 38,000 by the end of 2025.
Thank you!!! I am just starting out, and everyone has to start somewhere!!! Excited to see where the channel leads me. Thank you for taking the time to comment and watch!
*529😂
You need to sell these pre made already
@@yayovictorio4394 some people do, they are available for purchase online on sites like eBay. Personally, I don’t wish to sell them, just want to help people make them if they’d like!
Damn this is really cool and looks like a super simple mod! I probably already have a lot of this stuff laying around from parts kits!
if youre going to do it this way, add some flux to the pins before trying to add solder to aid in having the solder flow. Also, if you want to do this correctly, tape the wires to a non flammable surface to hold it in place. then use one hand to hold the solder and another to hold the soldering iron. place the iron on the pin you want to solder and touch your solder to the hot metal to have it melt and flow. letting solder just sit on the iron and then trying to have it scrape off onto the pins is asking for bad solder joints
Thank you!! I am no expert and it’s very clear to those who are familiar with soldering 😅
I have received so many great tips.
My boi has improved exponentially on thumbnails
Your boi should stop with missleading titels
@@michimichi1415 haha, he's not even that famous so this much click baiting is okie in my opinion but yeah in future he will do better
I followed your steps and it worked perfectly brother, thank you.
PS I have 0 experience soldering I just did what you did 😂
Let’s goooo!!! Prod of you!
Awesome hope ur channel gets attention
Opening and modifying items in the EU and US absolutely does not void warranty. Companies say it does, but it is a myth. It would be a violation of federal law to void a warranty because a tamper seal is broken. And in the EU, it does not void the 6 months guarantee on new items.
Thank you!! I had one other person comment and tell me. I had no idea 😬 very glad it doesn’t 🤣
@@POGObiWann it's something companies want you to believe, so they say it. but it's not true (in the us and eu. not sure about other places)
Your soldering iron makes cool noises.
I'd have to contract this job out...my fingers are to numb after my chemo treatment to do this. Great video
Thank you Greg!!! Good luck with chemo :)
I appreciate you taking the time to comment and let me know. Means the world to me!!
@@POGObiWann No problem.. I'm an OG player and I like your channel. Chemo is over...cancer gone. The nerves in my fingers hands and feet are shot. Could be temporary or not but gotta keep living and of course playing
@@greg_1492congrats on kicking cancer’s butt!!! Amazing that you are powering through and still getting out to catch em all!!!
Great stuff!
Wow! ❤
Can you make a follow up Vid of it in action please? Nice uploads. Keep her lit!
BRO IS FAMOUS 🤯🤯🤯
Not all heroes wear capes
Hey my guy I think you forgot to show how the battery supports the switch you installed and keeps it from sliding back into the system
@@KenKai-xq2nr oops!! Quite literally though, I just put the switch on the far right side of the speaker port, and the encasing of the battery rests on top of the switch and you screw it back in, holding it in space.
Thank you for letting me know!! I want to make it as easy for others, and if I missed a step we gotta make it right!!
@POGObiWann no worries, I noticed it while listening and skipped the video back a couple times just to make sure I hadn't missed it or something.
Yo dude, how long do you usually fully charged this when the top button blinks red 3 times that would not harm the device
Top LED blinking red usually means that it is SUPER dead and needs a good charge!
Once it’s a solid color, that’s how you know it’s getting there. Yellow is moderately charged, and green means it’s full charged!
Usually about 20-30 min on a charger gets you to Yellow, but could depend on how long the battery has been depleted for!
So if i keep the switch off it retains it's original programming and works as it should right ?
Meaning it can track sleep and all that perfectly?
Yes, if all steps were followed correctly and the switch is off, it will work just as it did out of the box.
If you want it automatic, if you flip the switch it will consistently act as if the button is being pressed resulting in it going back in fourth between sleep mode, or while connected, throwing poke/great/ultra balls
@POGObiWann Amazing Thanks soo much
Saw a video sometime ago, but it discouraged me from trying it looked really risky
Yours is wayy simple
Thanks alot keep up the great work
Now i can order for this
Let me know how it goes!!
You can still track sleep with auto turned on- it just has to be plugged in, otherwise it will auto exit sleep and re enter sleep repeatedly until it’s either plugged in or connected to a device.
Epic video
I have a idea for a video. I've been looking and I haven't a good video on what Pokémon you should wait to evolve until the end of the year community day for their legacy moves. With you being a up and coming CZcamsr I thought I'd have a higher chance of you seeing this comment. But you do what your gonna do just wanted to make a suggestion on what I wanna see thanks for the content.
Is maybe the same effect if you just put a tape one the button? This should be the same effect right? 🙈
@@larss4120 with the original Pokemon Go Plus, and the Pokeball plus - you could zip tie a quarter on the button and they would be “automatic” but for whatever reason, they changed that with the Go Plus+ :(
can you reconnect the motor along with the new wire or we just leaving it disconnected
With this mod, you do not want to re connect the motor wire. There’s a few comments from a user on this video from TheCaffee1065. Literal legend. They go over how you can maintain vibrating functionality if you wish to do so.
mind if i ask how you got the switch position so it won't move
@@cut__to__the__chase5283 I usually stick it on the far right side of the speaker port, under the piece of plastic that extends from the enclosure of the battery. It doesn’t hold it perfectly still, but does what I need it to. You can use hot glue to try and set it in place- but personally I am not a huge fan of hot glue.
💪🏼
W channel bro
Will this run through regular pokeball, into great balls, into ultra balls, until there no more left?
It takes from what you have set in the “accessory devices” screen!
So if you have pokeball selected- it will only use regular pokeballs.
If you select great balls, it will only use great balls.
If you select ultra, it will only use ultras.
So it can use all 3- but if you want to switch from a pokeball to a great, you have to change which one is selected in settings. Otherwise, it stays on the pokeball you had initially selected until you make a change, even if you run out of the ball you have selected.
Oddly enough my original pokemon red and blue carts' batteries still haven't died while I've had to replace them on my silver, gold, and sapphire carts.
That is remarkable! I wish I had a method to have backed up my Save files before they were lost to time 😭
@POGObiWann I have a 2 copies of Pokemon Stadium 2. So i replace the battery on one of them about every 4-5years and transfer everything over to that cart to save everything from the first 2 gens at least. I haven't tried messing with alternate methods using Pokémon Home though.
@@darrylshields6148 I forgot about stadium!!!
I didn’t own them until i was about 10, and I know my red and Gold died before I could save them 😭😭
Now I back them up with the Analogue pocket and GB operator
Leaving the vibration motor detatched is optional, correct?
Good question. Using this method of Mod, When I tried to keep the vibrating motor attached, It went crazy and pretty much would not stop vibrating, lol.
There is a post here in the comments from @thecaffee1065 who Is a literal legend and typed out the process and everything that you would need to keep functionality in the comments section of this video! Highly recommend giving it a read if you are looking to maintain the vibrating function!
Is that 2 pin 2 position switch? Your link in your description goes to a 3 pin 2 position switch. Am I not understanding something? 😅
In the video and in the description, it is a 3 pin 2 position switch
I just broke one of the pins off
Is there a way to have ability to pair multiple devices on 1 auto catcher at once?
Not the offical ones
Not that I am aware of! When you pair a go plus plus to a new device, it has you “reset” it by pressing the pokeball button and the top button, so if you wanted to pair them to another device it resets its connection to the previous device once repaired
How does this affect the catch rate "throws per minute"? Do you have to change which balls it throws or does it start with poke then great then ultra as you run out of the other automatically?
Great questions!
As for catch rate / throws per minute, it’s gonna depend on how many spawns you have, and which ball you use- so I don’t have any stats to give on those unfortunately!
And as for which pokeball is used- you can choose which one you want to use in the “accessory devices” screen. Unfortunately it does not switch automatically when you run out of pokeballs.
@@POGObiWann Thanks for answering my question! Two more questions: 1) Does this drain the battery faster? 2) Will it still spin pokestops? If it's turning off then back on after every throw I assume it will only be throwing poke balls...
@@Judd1894 Great questions!
1.
If you keep auto on, it will drain the battery faster as it is using power to illuminate the LED’s / Boot into sleep / exit sleep while not plugged in.But if you flip the switch and turn auto off when it is not in use, then no change in battery life, or if you keep it plugged in once disconnected it will not sleep loop.
2. It does still spin stops, and it does not turn off after every throw, thankfully!
The blue light then red light is the go Plus + going in and out of sleep mode, which only happens when it’s disconnected from your game and modded. That’s how you know the Mod worked, when it is going back and fourth in and out of sleep mode, as the mod makes the button essentially be pressed non stop. When it’s paired to the game, it allows for Greats and ultras to be used automatically in addition to regular pokeballs, but subsequently when it’s disconnected, it’s still spamming the button, which results in the “sleep looping”
Go Plus +’s (even non modded ones) automatically disconnect after about an hour of use, or if it’s got nothing to interact with for an extended period of time.
You do have the options to stop spinning, only spin, or only throw, or what ball is thrown. You can change those settings in the “accessory Devices” screen!
Where'd you get that exact screw driving from, i see some on amazon but non have (Y000)
@@POGObiWann So I did this mod on Saturday and it worked perfectly until today. Now it is just flashing red in auto mode and manual... Any ideas what is causing it to only flash red. I've shut if off, put it in sleep mode, and started all over.... Still only getting the red flash.
Whered you get that exact screwdriver from
@@dezziemoris7691 I’ll have to check what brand it is, but my mom got it for me off the TikTok Shop… 🤣
In New York for the weekend, will report once home 🫡
It is a fanttik NEX E1 Max screwdriver kit!
I still dont get why people need changing smth in Go plus +. I personally like vibrations and lights, so why??
@@wiktolego it’s all going to boil down to personal preference i suppose!
Most of the time, I have my go plus+ set using regular pokeballs. When I run out though, I can switch to greats and not have to click the button! Allows for me to continue farming catches while (hopefully) spinning stops and re-upping on regular Pokeballs!
The lights and vibration can be annoying to some. Personally I do not mind the lights much but I am a big fan of this “silent” mode (turning off vibration) since we never got to enable in settings!
Opening it does not void the warranty, thats illegal now
@@POGObiWann thats what i said. Its illegal for companies to vo8d a warranty because you opened the device
-because of magnuson-moss in the US, to be specific
AHH sorry!! I misunderstood 😅
Yeah, no… I’d break it for sure
This looks complicated :(
@@batzgameguru yeah, its definitely not the easiest, but it makes such a big difference gameplay wise. If you decide to try it sometime, I believe you can do it!!
Bro livres in 2016
I’m actually from 3016 🤖
Doing raids far away from you + device that auto catches and auto spin for you. This is paying to cheat lol.
Niantic and the Pokemon company came together to release this device. If they didn’t want people to catch / spin, they would not have created this product.
@@POGObiWann they want, i mean its the same as using a bot+spoofing to raids (remote raids), only diff is that is more expensive cause niantic allows it
You should do a quick tutorial too on how to disable the light cuz the damn thing is too bright.
@@RF1octane true!!! The LED’s are annoying- for my first one I ever modded, I just used tape and covered 3 of them up lol.
GREAT THUMBNAIL!
You are making great videos, keep it up! Hope to see you become bigger! Also, is there any chance I could get your friend code?
@@POGObiWann thanks! I will send u my friend code!
@@TheLordOfDripYTadded!
Nice! Will send u a gift
my brain doesn't understand
How about actually playing the game instead of having that thing play it for you.
Not sure if you’ve ever used one, but for example, when I’m working, it’s really nice to leave work and have a full bag and get a few extra catches.
Bro really just said I’m mad cause I don’t have one ☠️☠️☠️
@@alphabetsoup7844 🤣