How to Install the Can Am Ryker {Baja Ron} Sway Bar
Vložit
- čas přidán 24. 07. 2024
- Check out my website: www.RykerRydes.com
for Can-Am Ryker and Spyder parts and accessories!
Install and review of the Baja Ron sway bar (chapters / time stamps below)
Click here to order your Sway Bar:
www.RykerRydes.com
4 1/2" BLACK + DECKER angle grinder $29.99:
amzn.to/3LDXN92
4 1/2" DEWALT angle grinder: $63.59
amzn.to/3KEcjMI
0:00 Welcome to Ryker Rydes
00:17 What's in the box
00:59 What does the sway bar look like under the bike
02:10 How to take the hood and front facia (grill off)
04:15 How to lift up you radiator & how to keep it up
05:30 Removing the fan
06:56 Removing the links
07:26 Removing the bushings
08:34 Using the 4 1/2" angle grinder to remove old sway bar
11:57 Differences between old and new sway bar
12:47 Why did I choose Baja Ron brand
13:59 Where to buy
15:01 How to slide on new sway bar
15:53 Installing new bushings
18:07 Putting the "arms" on the bar
20:30 Connecting the links to the arms
21:18 Putting the fan back on
22:14 Laying the radiator back in place
23:21 Putting the grill back
24:18 Road test and review of the complete sway bar kit
29:27 Special thanks to my helpers: Ethan and Joey!!! - Auta a dopravní prostředky
So I’ve watched several of your videos and - first off, I really like that you don’t edit when a part/bolt/panel is being difficult to remove. I appreciate that instead of you just showing a seemingly seamless process during an install that indicates a simple process - you actually show the true hassle that sometimes comes with working on a Ryker. Seriously, thank you for doing that. I have installed a few upgrades or added items to my Ryker in the past few months and frequently I’ve cursed my Ryker and the difficult issues that -kind of- frequently arise.
Anyways, since you have a large knowledge of Ryker stuff I wanted to ask you a question about the sway bar kit. I notice that I get some “hopping” at times during cornering - especially if I roll on the throttle in the middle of the corner. The “hop’ is the best way I can describe the feeling and it comes from the outside front tire depending on which direction the corner is going. I have read as much as I can find about it, but honestly there isn’t a whole lot out there that covers this issue. I have tried front shock adjustments, front tire PSI changes, and adjustments to the main suspension under the seat (sorry I don’t know what that spring is actually called). Nothing has really worked - at least that is truly noticeable. Crazy thing is that I can go into a corner at X mph and get the “hop” and then turn around and replicate the same speed and corner and NOT get the “hop”. It seems inconsistent. So….. my long drawn out comment leads to this: I’ve ordered the Baja Ron’s sway bar kit and links hoping that it will - at least make things consistent - and at best, stop the “hopping”. Is it your thoughts that by replacing the sway bar and links this will help my issues? I’m going to do the upgrade either way you’d respond - but if you have another thought as to why I’m dealing with this problem I’m all ears. Thanks for all you post and I appreciate your time you put into these videos.
Thanks so much for your comment. I do highly recommend the sway bar and link replacement. You should feel an immediate change in your ride. If you are still experiencing the hoping, you may want to try the steering stabilizer bar: www.rykerrydes.com/product-page/rykermod-steering-stabilizer-damper-bracket-kit-with-jfg-racing-stabilizer
Please keep me posted on how the sway bar works for you.
Thank you for watching!!!
Thank you for the video and mentioning the comparison of the sway bars. And of course, your honest opinions and install. Job well done! 👏🏽👏🏽👏🏽
I appreciate that! Thank you!
Been on the fence about this upgrade for quite a while. Thanks for the great and detailed install video, as always!
Glad you liked it!
Enjoyed your Ryker surgery! I have learned so much about my Ryker watching your helpful videos. I do need to to get jacks for my Ryker!
Thanks so much Kelvin! "Surgery" LOL!!! This was my most time consuming install and it went great (no fingers lost)!!
Another great video Beth! I love the design of the sway bar makes it easy to put in and looks better than stock. Thanks to your assistants.
You are so welcome!
Custom Spyder Works & Baja Ron should send you a huge "THANK YOU" for your video! Because of your video and your reputation they received a sell from me today. I purchased the Baja Ron Ryker Sway Bar Kit. I wanted it noted in your video comments praying that they will see just how many sales they will receive because of your video. Stay amazing and have a blessed day! ~ Angelita
Wow!!!! What a great comment!!! I actually sent Custom Spyder Works a link to the video!!! They loved it so much, they sent me 4 links to giveaway. Very excited!!
As usual Beth you've done a great job you show us all how to do it
Thanks so much 😊
I got the sway bar and links installed today on my ryker rally. I went to Baja Ron’s actual shop in my town. I talked with Ron for long time today. His mechanic Daniel did it in 31 minutes. Amazing!!
LOVE Ron and Daniel. I have met them both and really enjoy them. Great guys, much respect. Thanks for watching!
Wow! Colour me impressed! That was a brave installation! 👌🏻 Especially cutting the old sway bar. That took bravery and total faith in Baha Ron lol. That’s another project to add to the list (I wonder if Rykers ever stop evolving 🤣). Brilliant video as always Beth. The camera dropping was so funny and when I heard “Quiet On Set!” I really did laugh out loud 😂. Ryde Safe my Friend 🙏🏻
P.S. Thank you again for the lovely post on Facebook.
Hi George! I am impressed with myself too! This was the most involved install I have ever done. And it wasn't too bad. If it wasn't 110 degrees out and trying to talk through to make the video, it probably would have taken half the time to do! lol And yes, the videos are always more enjoyable to make and watch when there are other people in it. There is only so much my dog, Frisby, can do! lol
Wow! Thats the most work I seen you do. Biggest project and you did great 👍. You get me motivated! Stay safe, I hear its crazy out there in Florida.
YUP! I am really proud of this job!! Yay me! lol Thank you so much!
It is really bad with Covid here in Florida. That's all everyone talks about and people are finally getting the hint about wearing a mask everywhere they go! Thanks for the message! Stay safe!
I don't have a Can Am of any sort, but i just enjoy watching your straight forward videos. Love your humour.
Thank you sooooo much!!!
Great video. Really made the task much easier.
My absolute pleasure!
Great installation video. You inspire confidence. Well done.
Wow, thanks!
Your videos are great. I seriously want one of these and your videos like REALLY make me want one. Lol. I'm actually taking the endorsement class at the end of July. Looking forward to it.
They are soooo much fun!
Once you take the class, you will fall in love! Enjoy!
I am really impressed! Awesome job!
Thank you! Cheers!
Love 💕 I learn a lot from you...be safe and keep making the videos
Thank you so much for commenting! It really does mean everything to me! I am usually much quicker at replying!!! Been crazy busy building my new website: www.RykerRydes.com check it out.
Wow Beth, you’re becoming quite the mechanic! I have moved back to two wheels now but still enjoy watching your videos.
Hey Lee!! Thanks for still watching! What kind of bike did you get? I would love to also get a 2 wheeler, but the driver's in Florida are just too scary!!
Hi Beth, I ended up getting a Royal Enfield Continental GT 650, which is a cafe racer style bike. I was jealous of my 16 year old son getting his first motorbike and I wanted to join him on rides. Plus I missed having gears and filtering etc. I’ve ridden two wheels for over 30 years now. I loved the Ryker though.
Another great installation video! I’m so impressed that you tackle these projects. I have been inspired to do some upgrades to my Ryker watching your videos.
I love that! I know you are quite handy, so it should be no problem for you!
Great install video Beth. Something I wouldn't want to tackle. Good job. I don't know what it is but I don't enjoy working on motorcycles. Thankfully, I have a good friend who is an amazing mechanic. Have a great day and ride safe.
I understand, it is not for everyone! It is weird how much I love it! I could spend all day under my bike! lol Not sure that is normal!!!
Great job Beth. I couldn't be bothered to get so involved so I had the dealer do mine a few weeks ago. For those curious, my dealer charged $150 for the install. They gave back the original bar. I guess maybe if I had told them to cut it maybe the labor would have been less.
$150!!! That sounds very cheap!!!Just curious, did you have to leave your bike at the shop for serval days, or were you able to just pick it up the same day? My dealership is so backed up, it is weeks to get anything done!
@@RykerRydes I did leave it for two days. I was working anyway so no big deal. 150 for the install, 20 for NH state inspection sticker and they took care of the wheel nuts on recall.
I just ordered today LOL. Thank you Beth.
Awesome, l am sure you will love it!
Well Beth here Iam again watching another one of your uploads. Thank You. Just an FYI. I’m more than capable of turning wrenches as I did it on airplanes for 30+ yrs. So I’m not here bc of lack of mechanical ability. I’m here bc if the way to show all the steps and troubles you encounter on each upgrade. The best Ryker channel on CZcams 👍
WOW! Thanks Rob, that means so much to me!
I have a 2022 Ryker 900 ACE with 400 miles...Today I installed Baja Ron Sway bar kit
Wasn't sure what to expect but I must tell you it totally changed the bike, Hands down the best upgrade
I have done. Worth every penny!!!!!!!!!
Why the Ryker comes with such a weak one I have no idea.
If you're on the fence no need to hesitate.
Great review!! I am so happy to hear that!!!!
Great job, Beth. Mine went the same way except i took the top 2 bolts out that hold the radiator fan to the frame and removed the radiator and fan as one assembly still bolted together (saves you the 4 bolts on the back of the radiator, not really a big deal) then bungee corded the whole assembly like you did for just the radiator, might save someone a little bit of time
I think your way might be better and is probably the way it should be done. I was copying Bill Ramseyer's video (lol)
Nice job thanks for sharing your hard work 👍
Big Mook DTGC 207 thank you for watching and your nice comment!!
Nice job, I did my Rally last summer and did not realize you could slide the bar in without removing the right shock.(that was in the instructions) The fan I took off in one piece with the fan. I also lost one of the clamp nuts under the engine. Got mine from Bajaron.
Yup, I was pretty excited when I found out that I could find a way to do it without taking the shock off, it was in my directions too.
Nice video - very detailed instructions. Makes me think, I can also do this.
My motto, if I can do it, so can you!! Thank you for watching!
Chrysler used to make bars like that for front suspension. I’ve seen the bars split in half when you tighten them. To lift the front end of the car so it would increase ride height of the front of the car and when they let go it’s a very loud bang! They use the torsion bar instead of coil springs. This application is for anti-sway to stop the bike from being too soft riding side to side motion.🙋🏻♂️🤷🏻♂️
Very interesting.
OMG.. so funny @ 8:39.."this is a one time thing". You mean you wouldn't repeat the process if we missed something 😂😂😂..great job Beth on the vid. You make it look solo easy
Exactly!! That was "fun" and not about to attempt it a 2nd time!! lol Thanks for watching.
Very good job! Two thumbs up 👍🏾👍🏾
Thank you! 👍
What kind a saw was that? I think that’s the best way to take off sway bar!
I see your link now ty!
That bit with the Grinder was some Tense Viewing - lol -- but for anyone without a power tool - it only took me about 15 minutes with a 7 dollar hacksaw to cut through the old OEM sway bar. Just goes to show how soft that old swaybar's steel was. Baja Ron's Swaybar is MUCH MUCH more firm Carbonized steel and makes a huge difference. Just watch Beth here for the install and you'll be good.
Thank you so much for your kind words, and your great advice. I had to borrow that saw too, I don’t own one either. Also, please don’t forget to check out my website rykerrydes.com for all your Ryker accessories.
I have a 2115 Can-Am RX stock haven't put anything still run great 18,000 miles and 7 years no problem with my sway bar or my suspension you still have it Factory spec
That’s awesome. It is such a great machine!!
Angle grinders are scary well done you.
I know, right?! Especially if the one you borrowed doesn’t have a safety guard on it!!
Thank you so much for the video
You are so welcome!
Great job.
Thank you! Cheers!
I just bought their grill guard with LED bar easy install.
Awesome!! Well done!
Love your videos soooo helpful! Keep it up :) Thank You!
You're so welcome!
Very nice work, I got news made a deposit on a 23 Ryker sport looking for the riding season to start
That’s awesome!!!! Let the good times roll!
Great job Beth! I was a little worried when you grabbed the death wheel. Now, I know how to do the install. Thank You for the shout out. I appreciate that. Another upgrade that I feel is worthwhile, are the floor boards. Makes life on the Ryker so comfortable. Are you going to do the muffler? Take care
Floor boards are top on my list. And yes, I have a muffler video coming out very soon. It has been a very busy few weeks for me! lol Ride safe!!
Good job!
Thanks!
I just purchased the Baja Ron sway bar and links. I just watched your video again for a refresher coarse on the install. The rear view mirror that is directly in front of you, how do you have that mounted? Do you have a video on that install?
Here’s the link RiderScan Install and Review (as seen on a Ryker)
czcams.com/video/mNd15bLvTr8/video.html
Nice job Beth. Your a real do it your self kinda girl! Very impressive.
Thank you so much! Always appreciate your comments!
Your welcome. Do you have an oil change video? Wondering if it is faster and easer than the F3. The dealer is about 60 miles from my home. I’m not going that far for service. I’m a shade tree mechanic myself, appreciate your. DYI videos.
Oops, yes you do. I just watched it again.
Looks easy enough, easier than what I expected. I'm just not sure I need it. Mine handles pretty good without it.
Sounds perfect!
I love your videos, I'm considering buying a 2022 Ryker rally edition, I know it says it has upgraded suspension, but do you know if it has the same standard sway bar? If so, It look like I will be upgrading it sooner than later with Baja Rons.
The sway bar is the same as previous years. Thanks so much for watching! Hope you join the family soon.
I came here to see the install video and now I can't help but wonder where you found that mirror above your dash?? I've never seen anything like that on any of the popular aftermarket sites!
Thanks for watching!!! RiderScan Install and Review (as seen on a Can Am Ryker)
czcams.com/video/mNd15bLvTr8/video.html
Glad to see you used your safety glasses. That grinder should also have a guard on it to prevent it from cutting you in case it kicked back.
I know, right!?!?! I borrowed the grinder from a friend, and was shocked it was missing the guard!
I've been guilty of it from time to time, but I have seen some pretty serious accidents as a construction superintendent.
I do love your videos, and have learned a lot from you since I bought my bike a month a and a half ago. So thank you.
Beth hi,
Question, what do you think about the sypder Extra sway bar kit I believe for the links 79.00 and 145.00 for bar kit.
Hi Carlos! Are you referring to the Baja Ron kit? That is the only one I can speak confidently about, as I have not used or seen the other link sets. But typically the bar kit should come with the links included/
Have you ever changed your steering damper it helps to keep your wheels from shifting when you hit a bump
Steering Stabilizer Bar: Install and Review
czcams.com/video/gN9nuvsEOvs/video.html
Hallo Beth! Looking at your new video from a hospitalbed . I got a leg injury so I got an operation yesterday (My 17e operation). I do not know If I will try the sweybar. I hope to get out more with my Ryker this summer. Hopefully when I get home. I have had a plaster on my leg for five month now.
Hope you are well.
Oh no!!!!! I am so sorry that you are in any discomfort! I hope the healing time is fast!! I am glad I am "there" to keep you company! Feel better soon!!
Hi Beth! Another great video. Was wondering, how much difference did this make with the constant “side to side” motion at highway speeds? Just got my Ryker in June 2020 and love it. I just would like to minimize that feeling on the highway as much as possible. Thanks
It certainly helps, but you will always have some issues because the bike is so light weight compared to a car.
Ryker Rydes Thanks
Good job
Thank you!
Nice job. Where did you get the decals the stripes on the center of your bike going down the hood and trunk?
Everything blue on my bike (including the stripe) is a custom wrap
Well done
Thank you!
Okay, two years on - how is the Baja Ron bar holding up? Any problems? Trying to decide if I want the ease of Baja Ron, or the solidness of a CanAm or Spyder Extras bar. Thank you for the video!
Omg! I love my sway bar. Best accessory you can do for your Ryker! Just curious, why do you think the other bars are more solid?
Cheers Beth. Are the written instructions comprehensive? For viewers that don't want to use an angle grinder they could use a hacksaw. Nice video which I'm sure will give lots of people the confidence to go for it 👍
Glad it was helpful! Yes the instructions were VERY comprehensive. I was the first to do a video on it, and I was easily able to follow the instructions. I did some minor install changes, from the original instructions. But it really was not hard to do!
Great video! Do you have any plans to upgrade the shocks?
I have lots a plans! LOL Yes I am thinking about it!
Awesome. Thanx for giving me the confidence to try this. Question: I have been told that I will need an alignment after replacing the swaybar. Have you noticed that the alignment is off?
Absolutely not!! I have replaced many sway bars and not one needed an alignment because of the new bar!!
@@RykerRydes Ok, thanx. I wondered when the service department wanted to charge me $900 for an alignment. Thank you
@@loribrogoitti5355 omg!!!
If the replacement bar is 13mm, what is the diameter of the stock bar? They look very similar...
Great question. Baja Ron’s sway bar is slightly bigger in diameter. But the big difference is the strength of the bar. It’s hard to explain, but you will 💯 feel the difference on your first ride. 1,000’s of customers can’t be wrong. 😉
@@RykerRydes what you feel is a difference in torsional stiffness of the bar. Strength is completely different. Torsional stiffness varies only a little from mild steel to the most exotic alloys, it is diameter that makes the big difference, hence my question. For example, the torsional rigidity varies as the 4th power of the diameter. If the stock bar is 12mm, a 13mm bar will be ~38% stiffer. I don't have my Ryker yet, only a pre order. I am a retired mechanical engineer. :)
Great video. I actually spoke to Ron at Bajaron earlier today about this sway bar setup. We talked for like 30 mins, it was great education on this part.
On another note, what type of camera are you using to film your videos whilst your per doing installations?
What type of camera set up do you have on your helmet and what type of communication device are you using while you’re driving?
I’m assuming many people probably use the same set up but I also see some video that isn’t so clear and also some audio that isn’t that clear as well.
Can you let me know and possibly give us a short three minute video on what your helmet set up looks like and your communication and video devices? It would certainly help rather than having to go through a bunch of videos looking for exactly what I’m asking you when I like the way yours looks and sounds already.
Thanks
Kaz
Hi Kaz! Thanks for watching!
Here are a few answers to your questions:
On another note, what type of camera are you using to film your videos whilst your per doing installations? I USE JUST MY IPHONE. NOTHING SPECIAL.
What type of camera set up do you have on your helmet (GOPRO) and what type of communication device are you using while you’re driving (CARDO)?
I’m assuming many people probably use the same set up but I also see some video that isn’t so clear and also some audio that isn’t that clear as well. (THE MIC SET UP WITH MY GOPRO IN MY HELMET IS PURPLE PANDA).
I hope you are asking because you like the quality? If not, I'd like to know if I can improve.
I will definably be doing a video of all my accessories and a separate one on what I use to record my videos. Great idea!
Nice one. Waayy too much work for me. I would probably start swearing during the video if I had to install that LOL. But I like how this matches the colors to your theme. I went with the factory upgrade and mine is doing really well I am impressed with it. I can only imagine that with what you have put in along with the metal links it is probably a lot better.
How is this holding on? Specially the sway bar. I don’t like that is a multi piece part and could end up having to adjust it over time.
Absolutely perfect! Baja Ron has been making these for a very long time, first for the Spyders. I have never heard of an issue. Thanks for watching.
You're good Beth
Thank you Keith, so are you!
Are the end links supposed to be able to move a little? Instructions say don’t overtighten but I got them really tight.
Yes there should be a little movement in the links. They move with the bike. Hope that makes sense. I think I show it in my video.
Do you have a link for the lift that you use for the ryker
Are you referring to the black ramps?
Is there a possibility of this voiding the warranty? I know if I purchase the original OEM sway bar it won’t.
Great question!!! My warranty is over, so I did not even think of this. It is worth a call to your dealership to verify before buying.
Great video. I will just get links😂
I did just the links and indeed it makes a remarkable difference.
You won't be disappointed!
Is there a size difference between the stock bar and the new bar? Thicker in diameter? No one mentions that... side by side comparison!
Hi David, it is the exact same size in diameter.
hi, how is driving .. and comfortable ... strengths and weaknesses.
here in italy, i see some rykers for sale, with not even 1000 km .. they have some defects ...
I have a 900 Ryker since 2019 and love mine. No issues!
@@RykerRydes congratulations for the videos
What does the replacement achieve? I'm curious because I'm considering ways to upgrade my ryker but I don't know what it would do for my ride? Thanks for any replies.
It’s more stability. Feels more planted. I talk about it in more details in the video. Thanks for your comment.
@@RykerRydes hey thanks for the reply. I watched the video but was still confused lol. I ordered the kit but I don't think I'm as skilled as you so I'm gonna have to pay to get it put on.
It is a little bit if a project. Let me know how it turns out.
My instructions that came with my kit says.....LH and RH bushings is from the passenger seat looking forward...looks like she installed the bushings on the wrong side...she was looking form the front...not sure if my instructions are correct.
The best answer you can get is by emailing Baja Ron directly: fyredad@hotmail.com Go right to the source. lol. Best of luck!
Do you have to change the sway bar and links ?
No absolutely not. It is an upgrade that will make for a more enjoyable ride. But, definitely not essential. If you ever decide you want one please buy from my website: www.RykerRydes.com
How long do you estimate it took you to complete the entire install of the sway bar?
Sorry, I saw in the comments below you said about 2 hours max.
Great looking bike, amazing woman.
Thank you kindly
Hi !!!! How long did it took to install the sway bar ?
Hard to say because I was filming. But shouldn't take longer than an hour or 2 max.
Your quite the mechanic got to love a girl thats good with her hands.
Thanks Fred!! I am quite proud of this install!
I purchased this bar for my 2021 Ryker and it came defective. I didn’t realize this after I cut my OEM bar. Now I’m stuck without my bike for the weekend. It’s a shame that I paid so much for it only to not being able to enjoy it.
Who did you buy the bar from. This is very unusual. You may want to contact Baja Ron directly. I never heard of that happening. Sorry for your troubles.
Actually I was able to make it fit by grinding a bit off the bar. Not only that I spoke to Ron and I have to say he was very helpful. No doubt the man takes pride on his products.
Yes! I am a huge Baja Ron fan. Great guy and stands behind his products.
What shocks do you have
www.rykerrydes.com/search?q=Elka+Shocks I also have an install video on it!
I got my from ron too and the dealer installed, but i feel that it worse then it was before, on the highway it's move like crazy side to side and it shake, I'm really upset..I post alot of money for and it did not help at all.. so disappointed 😡😡
OH no!! Is it possible the dealer installed it improperly? Can you sent me pictures? PS Find Baja Ron online and talk to him about it. He is an amazing man and will defiantly help you through this! My guess is (and I am NOT a mechanic) it is something else with our bike. Could be something simple like tire pressure or you may need a laser alignment? Please contact Ron! Tell him I sent you!
How long was the actual installation of the swaybar
It is hard to say. Between the extreme heat, and trying to talk through everything to make the video it added a lot of time. I'd guess 2 hours max?
@@RykerRydes awesome video
Finally got my ryker back and really enjoying it.
For a second I thought you were cutting the lower a frame that would’ve been expensive🤣
UGH! That would have been so bad!!
Your so bold. I could never do this.
YES YOU CAN! Honestly, if I can do it, so can you!! I have never worked on anything before!!
I’m gunna start a CZcams channel so I can justify buying all the cool hop up parts 😂
Shh don't tell my husband....lol
Ryker Rydes yeah, well stop giving my wife ideas on adding bling 😂
Miss Beth,2 questons (can't spell for Sh--) #1 How much does the kit cost? #2 Do you think it's worth the price? You see, I'm a disabled vet and if I get this, I'll have to get it installed .Thanks ,you may remamber me you wihed me happy birthday.(76)
Hey John!! The entire kit is $279. Is it worth it? I guess that depends on what kind of riding you do. Do you leisurely ride around side streets, then probably not. But if you are more of a spited rider, like me, then yes. Hope this helps. You may consider buying just the links. Very easy install and gives you the most bang for your buck...in my opinion.
Just got my sway bar from br will be putting it on ASAP thank, Beau PS. it came to $301
Not a fan of straight clamped end sway bars , the ends can chew out with vibration and hard road use think worn out allen stripped heads I would not trust them on outback QLD roads.. a better way of doing it is to use the factory oem up grade bar and use the Baja ron links with the oem red bar . Only thing is the upgraded factory bar is a lot harder to fit but worth it in the long run.
Thank you for watching the video. Baja Ron has been in business for a very very long time and he has never had an issue like that. That’s why you buy good quality. It’s been tried and tested, and you get what you pay for. I do appreciate the feedback.
I've just bought a new ryker and within 3 days I new it's the wrong bike, I've got parkinson's and did not realise you needed such force on the bars to steer and the roads in n Ireland are very rough meaning the bike is terrible to control. I'm going to sell the bike after 4 days, this was never mentioned on any videos I've seen.
Hi Ronan, I am so sorry you that it did not work out for you. I did mention in one of my earlier videos that there is no power steering and it is tough to maneuver, especially at low speeds. It really should have been explained to you when you bought the bike. It makes me so angry that dealerships don't do a better job of explaining the bike to it's customers!
I have the Can Am sway bar. And I have had upgraded sway bars on many vehicles. There is a reason why a sway bar has curves on the end. It gives the bar more strength. I don't think that bar is doing anything. The Can Am bar is not hard to put on.
Thank you for your input Frank.
you got your left and right mixed up with the bushings
I'll have to rewatch or check my bike.
Torque?
Hi Justin. I do not have the torque info. Please contact Baja Ron directly for that information. Thank you for watching.
@@RykerRydes It is vitally important to ensure that this bar is properly torqued, if not, the bolts will loosed, and the end links could come off while moving, and get caught up in things. It was a dangerous omission from this video.
Just curious, but what is your native language?
Curious why you are asking. Hmm.
You have a very different and unusual accent that I do not recognize.
a little soap on the bar to help those bushings(?)
Hmm not sure it needs it. Just need to find that sweet spot. Also I prefer hand sanitizer in those tight spots…dries fast.
@@RykerRydes alcohol on a rubber surface? Soap will lube the part to slide into place and then dry out naturally; alcohol will dry the surface (maybe too quick unless you're using a lanolin based product) and promote cracking on the surface. Look up chemical interactions with rubber compounds for more info...
I installed the BaJa Ron sway bar and end links today. OMG, those bushing nuts were a MoFo to get to. I happened upon a video by El Williams ( czcams.com/video/og7jZKBUL5I/video.html ). He used duct tape on one finger and stuck the nut to it. Then reached around the back and felt for the bolt coming through and while turning the bolt waiting for the nut to catch. I know it sounds crazy but it worked like a champ. I was able to do this with just me. I would say that out of the whole project getting the rubber bushings in place and bolted down was the toughest part.
Thanks for the tip!! Did you notice a big difference with the new bar? Ps sorry for my delayed response, I am still on my bike trip.
@@RykerRydes Yes, especially on the highway at speed. Before I was always afraid to leave one hand go to adjust my glasses.
🤟❤️🌍🙂👍👋👋🇨🇵
Simply put :
Thicker or more stiff sway-bars , flex LESS . THEREFORE YOU HAVE LESS BODY-ROLL , IN YOUR TURNS / CORNERING .
Absolutely!! Thanks for watching!!
That was a great show if your mechanical abilities beth. Most guys I know couldn’t have done that job 👍🏻😎 ✨Tues Nov 3 vote 🦁Trump🦁 ✨ 😘 ⚡️🇺🇸⚡️
You are too funny! Thanks for watching and the comments!
You put the bushings on the wrong sides.
It may look like that, but they won’t go on if they were backwards.
Beth get yourself a cordless grinder a lot safer to use
I am sure you are right, but I hope to never need one again! lol
I am a former welder metal fabricator, and PLEASE do not try to cut your sway bar off the way she did, especially without the guard in place. I have had those type of tools kick back and damage adjacent surfaces and in one case cut through a heavy leather glove and into my palm. A reciprocating saw with the proper blade is safer to use in tight quarters like that.
Great advice. It was very dangerous (as mentioned in the video) not to have a safety guard. Be safe everyone!!!
That is a concrete blade cutting metal. Im surprised it worked. Lol
It worked perfectly.
Interesting, yes. That appears to be a diamond abrasive blade. It is, yes, primarily used and marketed as a concrete saw, but, it is still a diamond abrasive blade. Those can pretty much be used for metal cutting also. The holes help keep the blade clean of small cut up debris in the blade and with blade cooling. Good observation, though.
What that FU&? You doing
Hmm, not sure I understand your question...
Hector, Hector, Hector. You need to get away from your mama's computer before she sees you and you get in trouble. You probably do not understand that this channel is for grownup adult people. That's OK, you will learn stuff like that as you grow up. But, it's all good. Have fun, Hector.
Then again, Hector, I might have totally misinterpreted your comment. In which case, it's all still good and you rock.
Also, it doesn't count when you give your own comment a "thumbs up". :)
One major boo-boo that you made. I just ordered this kit, and read that the instructions are given as if “sitting on the bike”…. I think you put the bushings on backwards. 😅
Thanks for letting me know, I will definitely take a look.