Thank you for this video. I just moved to a different state near my son and grandchildren and I needed to change my plug out from 3 to 4. Your video is very easy and helpful. I can do this my self. Again thank you.
It removes the bond from the cabinet to the neutral as it was previously when set up for 3 prong while isolating the ground so if there is a fault needing the ground the whole cabinet doesn't become energized. Electrons do not know wire color so you could potentially energize the whole neutral system in your house if you didn't isolate the ground circuit
Thank you. Only thing inhave to say is the reason i came to the video was to verify black and red sides for wires since my manual did not cover. Tip: Look on the top side of the box and see what color cord is coming in from the top and connecting to the terminal. Thank you!
Thank you! I've installed 4 prong on my dryer and stove now thanks to you. Also I appreciate your straightforward approach, some of the other channels talk about "let's get this man-sh*t" done and other macho things, but um yeah girls own appliances too, so thanks for doing things simply and clearly so they are accessible for everyone :)
The wire grounded to the frame can be white or green depending on the model dryer. As long as the dryer is grounded, you’ll be in good shape. Thanks for watching!
I have an older dryer that came with 3 prong chord. In the electrical box on the back of dryer, the internal ground wire (to the left) is green with yellow stripe, not white like I see here. When I install my 4 prong cord where will I place the green (with yellow stripe) wire that’s already on the dryer?
The green and yellow wire should stay grounded to the dryer and you overlap the green wire on the power cord using the same screw that’s securing it. The ground wire is either white or green like yours. Make sense?
Hi I’m connecting a 4 prong to my dryer. When I opened it up there is a white cord and another green/yellow cord. How do I connect it? Thanks my dryer is a kenmore
Yup! Thanks! Same thing w/me. Moved into a newer home. 1st, I had to use an adjustable duct; had to hacksaw it; finally got ready to plug it in, WTF? Eye yi yi! A 45 minute job turned into 2-3 days!
Double check your power cord installation, and after you confirm that, plug into outlet and make sure breaker is turned on. If it’s not an electrical issue, the dryer will need further diagnostics. It could be something like a bad door switch…
Thank you for getting right to it and not spending 10m of preamble. You are a lifesaver, dude.
No worries, glad I can help!
Thank you, middle aged housewife trying to install this while the hubby works OT very helpful.
Glad to help! Follow the steps and you can get in done. Thanks for watching!
SAFETY FIRST: Make sure the plug isn't plugged into the wall socket before connecting wires to the dryer.
I took the old dryer out a few days ago and removed the cord. And I'd forgot which wire was ground. New dryer works, wife is happy, and life is good.
Happy wife! Happy Life! Glad I was of service to you!
My cousin just became a new home owner and needed his dryer change. I watched the video and Walaa! It worked. Thanks 👍
Awesome! I'm glad it worked.
This is the only video that made sense when explaining , thank you for the video I was able to change to a 4 plug cord , Thank you !!!!!!
You are very welcome! Glad I was able to help you out!
Thanks I’m a woman with no help and this video helped me to change my 3 to a 4 successfully 😘😘😘
Glad to help! Thanks for watching!
Thank you for this video. I just moved to a different state near my son and grandchildren and I needed to change my plug out from 3 to 4. Your video is very easy and helpful. I can do this my self. Again thank you.
You are so welcome!
I just moved into my house and found your video! With my bf out of town, I couldn’t wait ! Your video was so easy to follow ! Great job ! Thanks !
I'm so glad it helped! Thank you!
Can you explain why the white wire (previously the ground) needed to be connected to the neutral wite
It removes the bond from the cabinet to the neutral as it was previously when set up for 3 prong while isolating the ground so if there is a fault needing the ground the whole cabinet doesn't become energized. Electrons do not know wire color so you could potentially energize the whole neutral system in your house if you didn't isolate the ground circuit
The most delicious repair man I've ever seen!
😋 Brains and beauty wins the race. Thanks for watching
Straight to the task... Excellent
Thank you Lis! Do you have any specific video requests or topics you'd like me to dive into next?"
What if you have double green wires? Would it be the skinny one going with the white wire? I’m so unsure.
I’m wondering the same thing. Did you get it figured out?
Great video! I save myself a couple hundred bucks!
Thank you for the support and sub!
Thank You. Now I dont need to bother or pay anyone. I can do it myself yessssss
Great! Glad to here. Thanks for watching!
Thank you so much! YOU are the man🙏!
No problem and thank you!
Thank you! You're a lifesaver!
You are welcome!
Thank you. Only thing inhave to say is the reason i came to the video was to verify black and red sides for wires since my manual did not cover.
Tip:
Look on the top side of the box and see what color cord is coming in from the top and connecting to the terminal.
Thank you!
No problem! Thank you for tuning in!
do all dryers follow this same black-white-red pattern, left to right?
So cool it’s exactly what I have explained it very well
Thank you!
Thank you so very much man. You're a life saver😊
No problem Jamie! Thank you for tuning in!
Thank you! I've installed 4 prong on my dryer and stove now thanks to you. Also I appreciate your straightforward approach, some of the other channels talk about "let's get this man-sh*t" done and other macho things, but um yeah girls own appliances too, so thanks for doing things simply and clearly so they are accessible for everyone :)
Thank you so much for your video
You are welcome! Thanks for tuning into my channel!
My wire that comes out the dryer is green not white does it still go with the white cord?
Does it matter which way the plate of the red black and white wires sit? Like I notice u have it to ware the wires are facing out
Thanks, so much. Your vdo helps
Glad to help. Thanks for watching!
Dim question: Do I need special screws for the terminal?
Thank you I needed this right now
Glad I could help!
Thank you so much!!!
You are Welcome! Thanks for tuning in!
I was wondering why my dryer wasn't drying tysm
Glad to help. Thanks for watching!
Thank you.
Glad to help. Thanks for watching!
Thank you buddy ✌️
No problem 👍
Great instructional video. Are the red and black wires interchangeable?
They should be since they’re both two equals of a 220v circuit
Thank you but I had a green wire with a stripe on dryer so I combined it with the plug green wire on frame
The wire grounded to the frame can be white or green depending on the model dryer. As long as the dryer is grounded, you’ll be in good shape. Thanks for watching!
thank you very much
You are welcome! Thanks for tuning into my channel!
Excellent video. Very helpful. Thanks!
Thank you and you are welcome!
I have an older dryer that came with 3 prong chord. In the electrical box on the back of dryer, the internal ground wire (to the left) is green with yellow stripe, not white like I see here. When I install my 4 prong cord where will I place the green (with yellow stripe) wire that’s already on the dryer?
The green and yellow wire should stay grounded to the dryer and you overlap the green wire on the power cord using the same screw that’s securing it. The ground wire is either white or green like yours. Make sense?
@@TheAppliancePlug absolutely! Thank you
Great Video !!!!!!
Thank you!
Nicely done
Thanks for watching!
I have my ground wire connected, but the screw won't go any tighter. Will this hurt anything?
Thanks dude
I don't see a short white screw to ground , so I just grounded it to dryer screw cover is that ok?
Thanks, God bless you!
Hi I’m connecting a 4 prong to my dryer. When I opened it up there is a white cord and another green/yellow cord. How do I connect it? Thanks my dryer is a kenmore
Perfect thank you! 😊
You are welcome!
hi, how to make connection for 220 volts . please help me I am waiting for your feedback
Thanks!
Thanks for watching!
Yup! Thanks! Same thing w/me. Moved into a newer home. 1st, I had to use an adjustable duct; had to hacksaw it; finally got ready to plug it in, WTF? Eye yi yi! A 45 minute job turned into 2-3 days!
Great video
The cord green wire to dryer cover plate screw
Gracias 😘😘😘
hi, please what is the parts number of 4 wires cable
What if it don't come on after you finish what might be wrong?
Double check your power cord installation, and after you confirm that, plug into outlet and make sure breaker is turned on. If it’s not an electrical issue, the dryer will need further diagnostics. It could be something like a bad door switch…
Oops OP poo poo😅opp😊lovely
Sloppy. The wire needs to be pushed in more. That cord clamp should be around the rubber jacket, not just the wires.
Daaamn still gonna work tho
Sorry about that MrDelta
handsome helpful man