Magpul Pro 700, Suppressor Cover and Glock Magazine - SHOT Show 2018 Day 1
Vložit
- čas přidán 20. 07. 2024
- Duane from Magpul shows off some of their new products at SHOT Show 2018 including the Magpul Pro 700, Magpul Suppressor Cover, 10 Round Glock Magazine, and updates to their Magpul Apparel line.
Follow Us!
Instagram: / ar15com
Twitter: / ar15com
Facebook: / ar15com - Sport
Magpul if your listing...
25 to 30 round Glock 45 ACP mags. For Guns like the CMMG 45 guard and Kriss vector.
I didn’t know I needed this until now
Pilgrim walks by at 7:05 lol. Suppressor covers looks cool. I'll have to give one a try.
Ha!!! I'd have never noticed that!
Price for that chassis I'd rather get top of the line MDT chassis.
It seem very similar to the AICS AT . Not sure if there will be other configurations and skins(snow,grey) more sturdy or only this first trial model?? Will they be available for fall before hunting or Christmas??
If the 10 round Glock magazines are cheap, they might work well for indoor matches and training where they get dropped on concrete floors and stepped on a lot. Use them until they look questionable or won't drop free, and then toss them. Maybe keep the spring.
Haven't bought a 10 round Glock magazine since before 2004, because they are usually a little more expensive.
So much hate for the Pro 700!!! KRG are a very average chassis company and they charge $1300 for a R700 folding stock and they have nowhere near the amount of features the Pro 700 has. Pre-ordered mine for $850 from Brownells and ditching my Tikka T3's for a R700 custom build
I would like to see a 10/21 PMAG GL9. They would work well with magwells.
The new Magpul Chassis and the Geissele 700 trigger serve as an economical way to get into Precision Rifle sports. I'm thinking a Criterion Inc barrel to go along with. Anybody know of a good supplier for trued Remington 700 action.
Pacific tool and gauge
Will an oversized recoil lug fit down in that recoil lug slot
Calibers available?
I would love to test one of the suppressor covers and compare it to my Manta cover.
Hope cheek riser moves higher than PRS
Why oh why does Magpul always design .308 bolt rifle stocks for AW pattern mags and not SR25 style mags?
I have one mag style for .223 (AR-15), I only want one mag style for .308 (SR-25).
I get it for 30.06 and .300 Win Mag since there isn't a standard but the AR-10 platform settled on the SR25...
-John
JD CRAP get "The Fix" by the Q it uses ar10 mags
What kind of suppressor is that?
a bit less budget friendly than magpul of the past, but im sure they're quality
Magpul Pro 700....That's neat! DO WANT!
i got mine yesterday magpul pro 700 chassi😍
Really impressed with the chassis. I was one of those,"Magpul has lost their minds with that price" until watching this video.
A little more than I am willing to pay, especially since they may be making modifications on the new models. I am going to way a year or so and see how the stock evolves.
It should be 500$
Anyone from Magpul reading the comments, you should do a Magpul 700 hunter with the PRS adjustments. It would take it to a whole new level, and still be affordable.
Love the chassis but not at 1k. Should be $699 fixed and $749 folder
Can anyone list all the parts & brands that compose the entire rifle? I’d like to build one just like that. That rifle is fucking badass!!!
The pro 700 wss interesting right up to the price, for another $300 I get a ruger pricison rifle.
TheDavidG27 True but that is about what your gonna pay for chassis systems now days. Really good for a side folder.
I am not paying that.
TheDavidG27 The point of buying a new chassis is to replace the old one with something different/better to your EXISTING RIFLE. Plus I'm pretty sure this is A LOT lighter than Ruger's chassis for their rifle. On top of that, Magpul added features they didn't have to add as well, but there is always that one guy (you) who has to complain just for the sake of complaining.
I have an RPR and I promise you that rife that he was holding will out shoot the RPR. This is going to be for the people doing surgeon actions and $4k plus builds. I would love that rife that he was holding.
that's fine. no one buying that chassis is wasting money putting it on a ruger. not that rugers are bad, but you wont be dropping a stage three performance kit on a toyota corolla either. obviously this product was not made, or intended to be marketed to you, or those who share your concerns.
The sales pitch claims it to be the most durable and high-performance suppressor cover on the market. It's probably true. But given it's 9.4oz weight, wouldn't a longer good M-LOK handguard that goes over the suppressor be more practical? Likely the same weight or less depending on materials. Still a great new product from Magpul as an over-the-suppressor handguard is often not an option.
not if you need that can to come off, not to mention machine gunners will be using it too. they could have made it out of a lighter material, but to reach the goals of the testing standards to obtain a contract, and still have it at an affordable price point requires some compromise.
I think you partially answered your own question... Over-the-suppressor options really don't exist for this platform. Current doctrine seems to be going the other way, unfortunately. "Operators" want rails that extend on the same plane as the receiver- this would necessitate an asymmetrical can and a CASV type system.
Paelorian a handguard extending over the suppressor definitely looks better, but it turns into a massive heat sync and after a couple of mags, the front of your rifle gets too hot to hold. I learned that the hard way with a build a while back, not to mention that qd goes out the window if you go that route
Chad Grimgravy If it fits under the handguard, why would you need to quickly detach it? It won't be adding length. Also, more than a few handguards themselves get too hot to hold after a few magazines. The solution is a vertical grip, perhaps a larger diameter handguard, and maybe a change of material, which should be enough to keep the rifle usable when firing any amount of ammo in a "real world" scenario (i.e. a couple mags at once rapidly, but not all the mags you can carry or more as fast as you can fire them). If Magpul can keep a suppressor cover cool to the touch, why can't a handguard do the same? It's easy to imagine a few tweaks, like a contact surface that doesn't transfer much heat, that would for a handguard that doesn't get hot. There are toilet seats that don't get cold to the touch in an unheated outhouse in the middle of the winter in the Alaskan interior.
I usually like the products Magpul puts out. But IDK about that "pro" 700 chassis. It looks big, blocky and just kinda, well... oogly.
I like it.
Don’t want a p mag. If left in your truck the heat they will swell and not drop free. Loved them at first.
Linda de mais
If I'm spending a grand on a chassis I mine as well buy a tikka already set up
Duane for NRA!!!👍👍👍
The gears of war longshot in real life....SHUT THE FUCK UP AND TAKE MY MONEY!
There is no reason that Magpul's POLYMER/ALUMINUM chassis needs to be almost $1000. No fucking reason at all. At most it should be half that...
Just do your own chassis and start selling it for 500$ problem solved !!
arBaal77 if I had access to the same resources that Magpul has I would. But seeing as how I'm a simple peasant I should probably leave it to professionals and just bend over and take it right?
Actually you just dont buy something thats too costly for you in your opinion instead of whining it at the internet. You can make all the same purchases that magpul has done and start a bussines that makes this shit. Then you can say what the price should be !!
Wow magpul gave up this year
Great gear... Overpriced clothing. Stick to the hardware. You are really good at it.
Oh no, you said the "accountability" word. Now that NRA's old guard will be out campaigning against you!
MTFU AND STFU
He said it "Just an aluminium chassis, it's just sandwiched with skins basically". 1000$ sandwich.
Like to his bio?
www.duaneliptakjrnra.com
So It does everything that the Bravo does but for $500 more. No thanks
are all firearms supplier reps stupid? how do any of these companies sell products with people like this on the front line?
9.6 oz suppressor cover. lol
way over priced.nice chassis though.
really MDT Lss with an add on stock way cheaper..laugh all you want
jjmckay6man1 way cheaper and a lot less features. Put it up against any other chassis with comparable features and it is very competitively priced. Especially for a side folder. Comparing the LSS to this chassis is like comparing Magpul’s hunter stock to an AICS chassis.
wow... how many people do they think will buy that chasis at that price? nearly $1k?? and a suppressor shroud? that was their premier products for SS2018? mmkay Magpul, way to go~! and nothing in regards to featureless accessories to help those unfortunate 2nd amendment supporters in the unfriendly states.... thanks for helping us out Magpul... so instead of waiting around for you to introduce something new for featureless, I went ahead and just deleted all of the Magpul crap because its non compliant... Luckily, other company have stepped up and picked up the ball where Magpul dropped it. my rifle is now all Strike Industries who in my opinion have the most innovative line of products seen in recent years in this industry. So don't bother introducing something because its too late... Magpul in apparel now? lots of mannequins.... wait... why would i wear any magpul branded clothing if I don't even own Magpul anymore? way to go Magpul~!
Meh
Too bulky it’s only good for plinking at the range not hunting