💻 How-To: ThinkPad Broken Corner Repair

Fix your broken palm rest corners on your ThinkPads!
This fix will be applicable to all ThinkPads that are using plastic for the case, the same steps will apply to repair any plastic pieces on anything, however for the magnesium base on ThinkPads you won't be able to plastic weld and should go straight to bondo or JB weld. This specific example is on a ThinkPad but will work on any laptop or computer case.
You'll need some things such as;
- The broken laptop
- Soldering Iron
- Respirator (ABS Fumes are bad)
- ABS plastic donor scrap
- Tools to cut the plastic (tin snips)
- Sandpaper
- Bondo (optional)
- JB Weld (optional)
- Paint (or plasti-dip)
First you'll want to cut a piece of ABS plastic scrap that roughly fits into the area you're trying to replace. You'll want to cut this oversized so you have some material to sand down smooth. Use the soldering iron to "weld" the new scrap in place where there is a void in your palmrest. You can get the shape pretty good with just the iron.
Next we'll use some 120 grit sandpaper to smooth out and further shape the corner. You can progressively move up in grit to get a finer surface finish. I sanded mine down but still had a few divots and imperfections.
I opted to try some bondo to further smooth out the surface, just a small application then back to sanding. I was able to get this very smooth without altering the shape. Of course you can just keep adding more ABS plastic if you didn't want to use bondo.
After that I realized it would be good to reinforce the underside, now maybe I should have plastic welded the underside too but I figured it may be easier just to JB weld this part, and it was.
I'm convinced you could fix your broken part solely with either bondo or JB weld, or solely by plastic welding. Here are 3 methods for doing this fix and all are valid.
After getting the shape and smoothness down, I masked off the thinkpad logo and applied some matte black spray paint. I would recommend painting the entire part, as the finish will not be an exact match. You can also use plasti-dip as an alternative.
This came out great and looks very much like a factory part. I went an extra step and customized and painted my whole laptop which you can see in my build videos, check it out!
------------------------------------------------------------------------------------------
⛧ \\ Table of Contents: \\ ⛧
00:00 - Intro \ Things You Need
01:05 - Plastic Welding
02:28 - Sanding
03:40 - Bondo (optional)
05:58 - JB Weld (optional)
07:55 - Paint
09:29 - Finished
------------------------------------------------------------------------------------------
⛧ \\ Insta: / htll_official
Please send me memes and anything cyberpunk/tech/dystopian related
⛧ \\ Music: XYFΞRΞX - / @xyferex8748
If you make any synthwave/dark/cyberpunk music yourself and would like it featured on the channel please send it to me!
⛧ \\ Merch: shop.spreadshirt.com/indstrkt
Please only buy something if you really like the designs! If you do grab something, please email me a pic of you wearing it, dm me, or tag me so I can check it out!
⛧ \\ Patreon: / htll
Please only donate if you have the means, if you don't - the best way you can help is to like, comment and share
Any amount you contribute will be poured back into the channel to bring you better content!
⛧ \\ Donate
BTC: 3QHZ4z7UuryXuVkMH3NtVTKrBrwyqtyiPD
ETH: 0xF7f848410960DC2C220555d5a70E3505fB4f271F
USDT (ERC20): 0xd6e40aa8b2ff210097b5abe960fd57a51fd96b46
------------------------------------------------------------------------------------------
⛧ 2023 High Tech \\ Low Life | - Cyberpunk - Projects - DIY - Art - Tech - Modding - ⛧

[@farrisbuellersweekoff]

Oh hell yeah another ThinkPad video!

[@hightech-lowlife]

Thanks! You'll get another very soon too 🍻

[@clumsysoldies]

That custom paint job is bad ass!!!!!! nice work! Subbed!

[@hightech-lowlife]

Thanks man! 🍻

[@trickybrainpuzzles]

Well, I've got a used laptop which has a bent corner. What should I do?

[@hightech-lowlife]

For metal you can reform it, or cut it off and do the steps I showed here with bondo + jb weld 👍

[@trickybrainpuzzles]

I know you're not really into software(Atleast I think so) but can you please make a video on how to buy windows

[@hightech-lowlife]

Buy windows, like a license? Try URCDkeys or whokeys.
There is a cool tool to download any windows versions: www.heidoc.net/joomla/technology-science/microsoft/67-microsoft-windows-and-office-iso-download-tool
Then just purchase a license to enter the key and activate after installing.

[@eidrag]

​@@hightech-lowlifeanother tip, buy old windows machine from enterprise, probably xp/7 era and get cd keys, install, verify and upgrade to win10/11 free. All my thinkpad in family have windows pro by this process lol

[@hightech-lowlife]

Yes this is a good idea, all the thinkpads I ever owned always come with embedded windows keys 🍻@@eidrag