Tuning our LB7 Duramax using EFI Live & DSP5 Switch! - Truck Build Update EP.8
Vložit
- čas přidán 12. 11. 2023
- In this build series, we restore our tired old 2002 GMC Sierra 2500HD, 6.6L LB7 Duramax Diesel. We replace 90% of the body and add tons of awesome aftermarket parts. When we're finished, you won't be able to recognize this truck! In this episode, we get the truck tuned by Precision Diesel using EFI Live V2 and add a DSP5 Switch. We also undercoat the truck using Fluid Film Black.
Here are the 5 tunes we can select from:
25Hp Lope tune
45Hp Economy tune
75Hp Towing tune
120Hp Street tune
150Hp Racing Tune
Here is a link to the undercoating gun we used in this video:
a.co/d/elyA25N
If you liked this video, please consider liking and subscribing!
This project wouldn't be possible without our amazing sponsors:
@pitstopboysinc www.pitstopboysinc.com/
Precision Diesel pdpower.ca/
Dip Outlet www.dipoutlet.ca/
@truckpartsuperstore truckpartsuperstore.ca/
Automark www.automarkottawa.ca/
Shred Shades shredshades.com/
Want to support the channel? Check out our website for some fresh merch!
www.motorbolt.ca
Want to see more? Follow us on Instagram for daily content! @motorbolt
linktr.ee/motorbolt
Song used in this video:
3thos - Burning - Auta a dopravní prostředky
I'm glad I live in Texas. No rust problems. Nice truck.
Yeah we don’t have that luxury 👎 Glad you like the truck though!
I just did some work on my friend's mothers 2003 Chevy Silverado; she wanted a rust protector, so I sprayed the truck with Woolwax. I have put it on three of my trucks. If you build it up thick on the first spray it works really well. If you do a second or third touch up it will last longer. I check once a year and do touch ups as needed.
Yeah our undercoating didn’t hold up to well through the Canadian winter 👎 we’ll add some coats this spring though
Hey brother you really need to buy and install a Lift pump. As these trucks get older with more miles the CP3's internal low pressure pumping gear set gets worn down thus not flowing as much fuel as it should. Also the feed lines can get sucked shut/collapse on bigger tunes because the stock setup sucks fuel from the CP3 in the engine valley all the way back to the tank through some very soft fuel lines... Installing a lift pump will keep them open from pressure vs closing from suction, not to mention it's much better fuel filtration which saves injectors... Your truck looks to me like it's probably dropping rail pressure because tune 3 seemed just as fast as 4 or 5 with the same smoke output. They should be noticeably different.
Hey man, thanks for the great advice! Yeah we’ve been meaning to get a lift pump, but haven’t had the chance to do so yet. You’re right about tunes 3 to 5 being similar. Our injectors were replaced once, but that was a few years ago and a couple of them are borderline within spec, so that’s not helping the situation.
just binged watched all the video love the series keep them coming
That’s awesome, we’re glad to hear it! The next episode is almost finished
Been waiting for this.
Glad to know someone other than my mom watches the videos 🤘😂
@@Motorbolt 😂 I’ve got an lb7 as well so I’ve watched every episode of this build so far
Right on! Hopefully you learned a thing or two. The next episode should be ready soon.
👍
😍😍😍
Where'd you get the lope tune for the LB7?
I’m interested on this whole list! Can i do the same to my truck being out of state or does it need to be flash tuned in house?
The guys at Precision Diesel did all the work, so you’ll have to reach out to them for details about the tune itself!
I think they have to do it in house, but I’m not 100% sure.
Any update on the under coating? I got surface rust I’ve been wanting to clean up and been looking for something for a while
Honestly not a huge fan 👎 It held up fine for the summer, but the snow and salt from the wheels flaked off most of the coating. We’ll keep adding coats every few months and maybe eventually it’ll build a stronger coat, but as of now there’s barely anything left.
do injectornozzles cp3 and turbo and run that ecm file get trans tuning too
Yeah maybe eventually!
hey i have a 02 chevy duramax was wondering if the gmc hood would fit on my chevy?
It will, but some modification is required. We made a full episode about it if you want to learn more.
What backbumper is that?
It’s from a 2014+ GMC/Chevy. We have a full episode about it on our channel if you want to learn more.
How much did that cost you
It varies based on the truck and tune. You can reach out to Precision Diesel to get a quote for your truck.