Look What I Just Got!! // X220 V2 Beginner FPV Drone Kit
Vložit
- čas přidán 5. 05. 2021
- Wizard V2 Without TX: bit.ly/32VfNa8
-FPV Merch-
shopdronemesh.com/product-cat...
You need help getting Manufacturing and Product in Market:
dronemeshlabs@gmail.com
Want A Custom Build Email me:
dronemeshlabs@gmail.com
Need Help with something?
dronemeshforum.com
Follow Me on Instagram
/ dronemesh
Follow me on Facebook
/ dronemesh
Consider Following me and supporting on Patreon.
/ dronemesh
-Latest Fav Products-
FC #1: bit.ly/2Vz2Gro
Budget ESC: bit.ly/3elmaIu
-- My Tools & Gear 2020--
Goggles #1: bit.ly/2YEjBwT
Google #2: bit.ly/2YDi4q8
RC Controller: bit.ly/2LR9uxc
Main Battery Charger: bit.ly/2SQGWp9
Fav Soldering Iron: bit.ly/2ylZC9O
--Recording 2020--
Audio Interface: amzn.to/36iajaE
Microphones: amzn.to/3g9dyFR
Lav Microphone: amzn.to/3cNDZi1
Camera: amzn.to/2AEk3Qu
2nd Camera: amzn.to/2Tl1YNN
--PC Specs 2020--
AMD 3950x: amzn.to/2WRqEQx
GTX 2060: amzn.to/2XfEOtC
Auros Elite MB: amzn.to/3bNCQ91
Case: amzn.to/2LGMlwb
RGB Ram: amzn.to/2TmVm1G
Water Cooler: amzn.to/2zgeabR
-- TOP 30x30 4in1 ESC --
Aikon AK32
BG: bit.ly/2uSBI0O
GetFPV: bit.ly/2FU854b
RDQ: bit.ly/2YVkL3K
Tekko32 Metal
BG: bit.ly/2G5VfRC
GetFPV: bit.ly/2VsroYV
RDQ: bit.ly/2UF3WKU
T-Motor F55A
BG: bit.ly/2JIdAo1
GetFPV: bit.ly/2P2i8sp
RDQ: bit.ly/2I3D69n
T-Motor F45A
BG: bit.ly/2CZe9IP
GetFPV: bit.ly/2D3g2U3
RDQ: bit.ly/2YZmCof
Dalrc Rocket
BG: bit.ly/2O5Pcxc
GetFPV: bit.ly/2WQ8Imk
RDQ: bit.ly/2Kg0EKe
-- Best 20x20 4in1 ESC In Order From Best --
HGLRC Forward
BG: bit.ly/2CM2oEG
GETFPV: N/A
RDQ: bit.ly/2GfMKDQ
Aikon AK32 Mini
BG: bit.ly/2Yu2E4p
GetFPV: bit.ly/2KlKlLU
RDQ: bit.ly/2KfQ6KV
Airbot Ori32
BG: bit.ly/2UTK2JF
GETFPV: bit.ly/2KlLfrM
RDQ: bit.ly/2U94tRe
------------------------------------
I highly recommend these products if unsure
Tekko32
bit.ly/2NwffxB
kakuteV2 AIO
bit.ly/2CxQct0
Hakcrc (Best Budget ESC)
bit.ly/2OgrOlO
25km Range on these awesome VTX's
FX2
goo.gl/8PswEP
X2
goo.gl/VsDZ6n
---------------------------------------------------------------
The HEX driver I recommended which i bought 2 sets of (Must have if your into building)
bit.ly/2NwBVxt
Batteries I use
bit.ly/2PlCvQn
Camera I use
amzn.to/2iQHCwV
Standoffs I find to be the best
bit.ly/2CwG17Z
Xt60 Premade I use
bit.ly/2Pmf89j
Heat shrink I mentioned
bit.ly/2PkrVcA
Soldering station
bit.ly/2zZP9za
Some of the links are affiliated links.
Contact: mesh.drone@gmail.com - Věda a technologie
![Eachine WIZARD X220S FPV - Full Review - [Unboxing / Inspection / Flight-CRASH! Test / Pros & Cons]](/img/n.gif)
Wizard V2 Without TX: bit.ly/32VfNa8
Joshua bardwell video about it
czcams.com/video/Phr6p6PVsu4/video.html
Literally at the same time Bardwell puts out a video saying avoid this at all times.
Yeah I saw that, I would rather have the Roma, or the Nazgul for an extra 20bar, for sure for my first quad.💯
Good ole Wizard! The original V1 was my very first quad years ago
The triple OG gangsta quad! V1 was epic V2 was fire literally! Let's see what v3 brings!
I'm glad you actually reviewed this product, I started out on the OG Wizard x220, and though it did have problems, it WAS great to learn on. This one looks similarly ready for a new person to the hobby. Better than the one I had. The split top for easy access/repairs (VERY important, likely gonna be in and out of that bad boy all the time, if it's anything like what I went through), the carbon bumper at the front, the thicker top and bottom plate, nice battery pad, nice antenna mount, nice antenna, much better cam then the original. The arms are narrower, but still sturdy, the frame plates sandwich together using press nuts now, instead of nylocks, saving weight and making disassembly MUCH more straightforward. The motor guard issue is dumb, the tpu skids are the reason you cant get the motor bolts tight enough to keep the motor guards still, and it's just not a viable setup. People will either ditch the skids, add the foam landing pads, and get new motor screws, or they will over tighten the screws in the current config, touch the motor windings with said screws, and have REAL problems with shorts, overheating motors, and some will destroy motors/ESC's like crazy before they sort all that out. That being said, the receiver they ship with has poor range and is easy to failsafe. So there are some obvious improvements to make early on. That's a good thing. New ppl are going to crash and break this SO much, it's cool that they have upgrades to easily add and appreciate as they slog through all their learning mistakes.
still have my v1. Good way to get started in this hobby. the only eachine I would ever use again
A new way to set stuff on fire, yay 😅
We'll find out In the next episode.
@@DroneMesh look forward to it
Wow. the original was what got me into this amazing hobby 4 years ago. I,ll be buying one of these just for the nostalgia fact, Probably just keep it on display.
I've modified my x220s which comes with the same tx, I put a tbs tracer on the tx and a nano rx on the drone, but built everything into the apex frame. flies amazing. all these videos are on my channel.
Still have the original I bought like 5 year ago and passed it down to my son and I got a rotor riot drone. On the wizard I upgrade the camera and put betaflight on it and the rest is original. Gotta say that original is the best bang for your buck.
Looks much much better.
A new Wizard, cool, but quite expensive these days for what it is.
I still have the original x220 and love it! It tought me so many things.
Mostly how to build and replace parts 😂
Awesome review, Sam! Looking forward to the flight video! 😃
I don't know why... But I have a bad feeling about this one. 😬
Anyway, stay safe there with your family! 🖖😊
nice looking kwad bro!
arris has the "explorer220" pnp model at 169 i think...has sweet components in it as well...
i have the eachine novice2 model...sweet flyer! hangs with the emax t/h freestyle model! running same prop/battery combo...
I had one of those and on the second flight it burst into flames in the air and crashed to the ground just like the Wizard on lord of the rings. It was hilarious! I do have some Eachine stuff that is quite good, but this was not a good experience. It was an ESC that shorted and caught.
Yes this thing is very low quality and just shitty considering you can get a nazgul5 for a very similar price
Can't wait to see you fly it. Curious if it got a bit better then the original. I see the same lipo charger as the old one, looks the same? And the nice high quality lipo from Eachine 🤣🤣😉. JB's wizard was DOA so that's why he says it's crap. And yah there are better quads for the money nowadays but with the wizard you have to learn to repair and fix it because something is gone break for sure 😜😂😂😂😂😂.
Thanks Sam 🍻✌🏽.
Thanks for the video. Do you have a link for the hex drive you used in your last build video that has the swappable bits please? The links in the last video's and this video's description point to a set of hex drivers.. not the swappable one. Thanks!
Would you recommend this drone for video or more just for racing or fun
Bardwell just trashed this thing. It is hard when the nazgul v2 is only 30 dollars more. Looks much better than the original wizard though.
Nice package & information 👍
Hey mate where did you order this from so it comes with transmitter and receiver
You mentioned the batteries could be better, what would you suggest on a 4s quad with this weight and 2207 2550kv motors?
hello and thank you for your review! There is a variety of opinions out there for this quad, esc seems unreliable and motor or fc stop functioning after a while. Have you flown the drone for any time long? what was your experience and could you please express your own opinion for the wizard x220 v2 in the long term?
First X220, except stock magenta props who exploded in mid-air, was nice and cheap training quad. Former coworker ripped it for 2 years till lost in bushes. I'm curious about how v2 flies.
Are those the same ESCs from the original wizard?
How much for that complete kit? And where to buy it? Thanks
The x220 is the only drone I ever got and I still fly it with original props, 😂😂 very much worth it for a beginner. . Must mist get this one.
Im getting my fpv beginer kit in 22 days .
Can you give me any advise ?
Is it worth to buy this and do some drone free fly?
I Looked around his channel and I can never find the follow up videos? Are they even there?
This brings back those late 2016 summer memories! 😊🔥I like the revamped version with 5mm thick arms. Major plus! The biggest problem i see is that there isn't 8 stand offs only 6, also doesn't have side plates to add top plate strength. That'll become an issue possibility cracking or snapping over time, the original had side plates that would pop out in intense crashes and it helped keep the top plate from snapping. Nonetheless I'd still recommend this to anyone interested in getting into FPV.. Solid 8 out of 10 IMHO..
No way! Ultra low quality parts used in Eachine products fail much more often and aren't parts you want to reuse on new builds when you crash this and bust it up. It's disposable! The parts are not something worth using in another build.
Plus, if you do want to attempt to keep this in the air it costs you a lot more than a quality product does because these cheap parts fail and break so much easier. I've found, from buying this junk, that it costs more to keep this in the air for a year than it does a quality brand quad, because of all the repairs these junk brand quads need vs. the quality brands! 🤔👍
@@noforyoutubepremium3108 Sure, from an established hobbyist standpoint of view, that may be the case. But, for a beginner's perspective, I GREATLY disagree. Myself and 4 others all started with this set up, sure there's alot that can be better. But anyone can say that about anything. 🤣😂
@@mikeflightfpv2162 Bottom of the line parts = fails more & breaks more = costs a lot more than the original price tag = probably double in two years! + once it's toast and you're sick of repairing it, those parts aren't what you'd want to use for another build. Too poor quality, so you dispose of the whole quad!
Quality quad = breaks less, fails less = costs less than Eachine junk over a 1 or 2 year period. + parts are good quality = you can reuse them in a new build sometime!
= A BETTER OVERALL VALUE! + CHEAPER IN THE LONG RUN! =(;^)-
...I've actually done all of the above = I know these things for a FACT.
No get the nazgul v2 for $30 more . Way freaking better
@@mikeflightfpv2162 the nazgul v2 is way better and only $30 more
Great quad 🤜🤛👍🔝
Is Futaba receiver and transmitter compatible?
It is possible to add a GPS to the Wizard v2?
Some said that the drone comes with a faulty engine but most said that it comes perfectly and works..If you can tell me please this drone works very well ie the duration, how long it works because some said What did you say? will it work for me ?? 😪😯
do an unboxing of the DJI fpv drone
Could you make a back up file and send it to me i reset my drone and have no backup thank you
Oh wow v2?
Just saw on JB video about this. Not soo good :( Stick with Roma or the Nazgul5
Setup and review, please.
JB put up a post thrashing this
Yes that's typical.. Once I fly it I release my review.
Heard they crap out wuick
that flysky rx is pretty bad in my opinion, failsafe at like 80m, so i replaced it with a tracer nano rx and modified the Controller and put a tracer tx on it which flies amazing.
What scares me about these 'beginner'' set ups is the LIPO batteries that come with them. Too many people buy these as gifts and the batteries are mishandled which as many of us know can be disastrous
0:38 Its not flysky receiver its transmitter 😅
Wow! A PDB and ESC's on the arms! Did I just go through a time travel portal back to 2016?
Most will think this seems like a good way to start, but 5" are so highly overrated, except for back in 2016, and before. Back then, there wasn't small, miniaturized gear to be able to make smaller quads, so everyone built and flew 5", because that's the smallest size we had. No way I'd start flying with a 5" now because they are so heavy that every hard crash has the potential of breaking your quad. Since who0ps to 3" are so much lighter, when they crash they do less damage to themselves on impact! So, I suggest new people to the hobby start flying smaller, lighter quads. I loved getting much improved flying in acro mode (fully manual) with a who0p. No damage when it crashed, and beginners crash constantly, and easy to fly anywhere... even inside your house! That's important, because you need the stick time to get muscle memory going with operating the sticks.
You also have to have a lot of room to fly a 5", and the noise attracts a lot of attention from neighbors, etc. The smaller the quad the less noise it typically makes.
Not a fan of Eachine because they always use the cheapest, low quality parts possible and that always results in having to replace boards, motors, etc. This makes the overall cost of flying Eachine quads high because of all the repair costs typically needed to keep this in the air for a year or two.
I learned this through experience flying these low end quads and now know to avoid them. They end up costing more over a year or two than the top name brand quads that use quality parts, because those simply don't break nearly as often.
Anyway, learn the hard way and buy this stuff, or learn from my experience buying this low end gear... Your choice! Just trying to save you some cash, and make the hobby easier for you right out of the gate! 😎🤘
PS
Plus, if you buy the better quality gear and it does break or when you get more experienced and you want to rebuild it or swap parts to something else, you can use the quality parts from a name brand quad, where you won't want to do that with these parts. You'll understand that more once you become a seasoned veteran in the FPV hobby. Quality parts = good... reuse them on another project, cheap junk parts = garbage. 😉
5" are still my favorite, with separate esc's on the arms. The 4in1's just keep dying and have to trow away an esc which is basically only 25% dead. And anything smaller than 5" just doesn't fly like I want it to fly.
But I totally agree on buying cheap or expensive stuff. Just build yourself one with quality parts that have proven durability.
any other budget kit you'd recommend for beginner?
Look better then I though I like it
The motor guards end up rubbing the motor
Cool👌
You had me at Old Ass Esc LOL
individual ESCs, seriously?
Only one good thing abt the wizard . Yr going to learn how to build quickly. Shit breaks for no reason or even DOA .Ppl get the nazgul v2 , not a wizard.
I want to see how this quad holds up in a bando the arms look beefy. The frame should hold up pretty well ig the big thing is to see the tune that comes out of the box as a beginner a whole lot of propwash and oscillations would make this a poor buy.
Dude don't get this, the components on this (especially the motors and escs) are really low quality and just straight up bad. Get a nazgul5 for basically the same price, WAAAAY better quad
@@ValFPV Thanks bud , I won't buy it , just wanted to see what Drone Mesh does to it. Already have a HGLRC wind 5 lite frame lying around will put a Diatone mamba stack, and some Tmotor velox motors on it. 😄
@@aakashjana6225 nice man!
It's were it all started for me ...best drone to start wit ...
Still only 6 stand offs... Oh well. At least they got rid of the side plates xd
Edit: I would expect a bit more for the price
Like your videos can u plz show it flying ;)
looks like absolute garbage to me. for this price you could get a nazgul5 lmao 😂
Exactly! Buy quality and gets parts you can reuse on future builds. Buy Eachine junk and you'll not want to reuse these junk parts on other builds, even if you get lucky and they don't fail or break! 🤔😩
Who Sells the X220 V3 Beginner FPV Drone Kit ?
man you're like a Chernobyl disaster, this is not worth even 99 quid :P
IF an esc burns up.... LOL
I do look better then v1 for sure hopefully it flies better then v1 tho lol
Don't count on it! Eachine = junk, because of the ultra low end parts they use! 😢
It won't. The ESCS and motors are still trash. Get a nazgul5 instead. Almost the same price too
@@ValFPV am ok bro I have 5 5inch builds already am ok wit this one leave it to the newer guys lmaooo was just giving them some hope lmaoo
@@noforyoutubepremium3108 lmaoooo giving the new guys some hope
@@ValFPV EXACTLY! and that radio it comes with is junk! You'll never keep using that for long. So, you can buy a good radio right out of the gate and learn everything on your long term radio. I'm still using my only radio, I've ever purchased, 4 years ago.
A new wizard?!?!
Eachine was okay.. because of the price..but the price is too high for the thing you get..its not rubbish..but not the best drone you can buy for the money.
Hey man i what are the chances you send me a drone for free?😅
Looks like they used the parts they never sold
you fuked up lmao
Don't waste your time reviewing this .. buyers don't waste your time or money on this .
wow
In my humble opinion, this does not seem a good beginner kit. It will break and malfunction very soon. You should buy something a little bit more expensive so it can last on the long run
Lol why
Eachine Drone = Hyundai
Could the new pilots please not buy this quad. Nothing but problems 🥲
Don’t buy this piece of shit spend get a nazgul5 for slightly less money and it’s 10x the quad this junk is