SATA X5500 FUTURE Spraying Clear
Vložit
- čas přidán 13. 10. 2022
- Merch Link:
www.spraygunsd...
RAW footage of work done by The Gunman.
This is my 2nd Channel, see below links to my pages
Main CZcams Channel
/ mrzoeystevenson
Gunman's World
/ @gunmansworld4314
Website: thegunman.net.au/
Rumble: rumble.com/c/c...
BitChute: www.bitchute.c...
Odysee: odysee.com/@Th...
Instagram: / the__gunman
Twitter: / gunmanthe
TikTok: / the_gunman_painter - Auta a dopravní prostředky
You should try mixing 50% clear and 50% blending solvent works wonders mate no polishing required a lot of times
Great finish on the clear Gunny have to agree that is a nice looking gun but I'll have to make do with my standard X5500😁 I used to use the 1.3 I in my Sata but after watching you with this gun I've gone back to my 1.2 I and I seem to be getting a flatter finish, only downfall it's a bit slower but it's worth it👏🙏👍John UK.
"I'm going to polish the T." 👀🤔
"I did it already."
😂
Very nice.what psi or bar were you spraying at?I found my 5500 to be an absolute water hose
Wich Pressure do you use by Clearcoat?
I own the Sata Phaser 1.2 i, and i dont like it for clear. I use it mainly for fine metalics or pearls. I feel like clear, unless its thin, usually takes longer than it should to get through a panel.
@DIOS, FE, LIBERTAD, y democracia si me gusta. La pistola es excelente para metalicos, pero para clear se me hace muy lenta. Especialmente si esta usando un clear de altos solidos.
@@JoseMedina-md6sq tienes la phaser en RP o en HVLP ? las RP también son para metálicos o solo para barniz? Gracias amigo
@@GrimaldoGuidoGutierrezGu-wb8yd tengo la 1.2 hvlp y la 1.3 rb. En mi opinion las dos sirven muy bien para metalicos, pero prefiero usar la 1.3 para clear porque es mas rapida.
ao wrapped to have brought this gun off you. I love it !
Buenos noches ¿Que media de boquilla es amigo ?
Salut the gunman que pense tu de ce nouveau pistolet sata ? Pourras tu faire une vidéo pour dire ce que tu pense de son atomisation ? Pulvérise t’il mieux que les anciens que tu avais testé ? Quel taille de buse recommande tu pour appliquer les vernis ? 1,2 ? 1,3 ? Ou 1,4 et pour finir quel est la pression analogique parfaite du pistolet que tu recommande?
2.0 bars ? 2,2bars ? J’aimerai bien acheter ce pistolet c’est pour cela que j’aimerai avoir ton ressentis sur celui ci !
Merci tu fais de l’excellent travail continue ainsi l’ami
O cara manja
👍👍👍
❤️❤️❤️
👋😁👍😎
🙂👍. Darek🇵🇱
Very hard to hear you with your mask on