Video není dostupné.
Omlouváme se.
My Review on the new SATAjet X5500
Vložit
- čas přidán 15. 02. 2019
- In this review I give my review and feedback on the new Sata x5500 and what I think about the I and O nozzles. Addressing what everyone says on social media and give my opinions on what works best for me, using Axalta's Cromax Pro.
@Boothtalk on instagram for the weekly livestream
@boothtalk_jeremy on instagram- personal page
Boothtalk Group on Facebook for tech talk
Booth Talk on most podcast platforms for the livestream audio and interviews with people from the industry.
BoothTalk theme is Non-Copyrighted music from youtube. "Burnt" by the Jingle Punks
Created with Movie Studio Platinum
Good review sir! Looking forward to what the future holds for boothtalk!!!
Great video. Now, I'm looking forward to the o nozzle. I currently have the I nozzle.
I tried the I nozzle and it wasn't for me.
Same here. It depended on what clear I was using as to which seemed to fit me best.
hola TENGO UNA sata 5500 and I don't work well where I get the maintenance kit to see if it gets better
Great review loving my 1.3 I
So for Spies Hecker waterborne what would you recommend the 1.2 I?1.2 O?1.3O?Im using a 4000 b rp with a 1.2 at 2 bar and base comes out muddy and dry.Thinking of going with a Tekna Pro Lite if I can’t get these Satas to work right 😑
I use my 5500 for clear currently. However, I am at a shop that sprays spies water now. I use the WSB setup in both a 4000 and 5000(hvlps). If running an RP, a 1.2 is recommended. That particular water is recommended to spray at 22-25 psi.....which I believe converts to 1.5-1.7 bar. Full trigger on fluid.
I've been using the rp 1.3 (o) nozzle for clear only since November, Find it quieter and seems to use less product. I have 3 rp5000's and love the new x5500
My iwata lays clear good. My sata for base is awesome, always been a SATA guy, I would love to be convinced in a sata for clear.
Larry Soto Our rep has been a SATA guy all his career, I think the only gun he uses that isn’t SATA is his Iwata for clear. I think it stings a little when he talks about it 😂
bro thats fun i feel vise versa iwata i prefer for base and my sata for clear
Just bought my x5500 rp 1.3 "o" nozzle. Its loud and the fan sucks. Ive heard problems with air caps? The gunman as a video of this problem. Have you seen this?
Like any issue, get in touch with who you bought it from or reach out to your SATA rep. I'm aware of what gunman says about them and that's his opinion, much like I have mine.
Personally, if theres an issue, I get with the manufacture
I happy with sata.... Very happy. I found both your vids searching issue. Problem, i bought it new, factory sealed sata box. Its very loud.. Has a 1/4" stream before it starts fanning. I seen his video on the air cap issues he had with his x5500 demos. I will call sata and see my local dealer. Thank you.
Nice job mate 🤠🔫
Sata sent me a gun that hasnt sprayed right since day 1. I thought, maybe it's how it's supposed to be??? No. The fan is uneven. Something is wrong with it. And I have the 1.3 I nozzle digital. Nearly a grand for a gun that has never sprayed right! So I ordered a nozzle set because I'm sure theres no warranty
If there was an issue, why didn't you contact SATA? They do a great job of taking care of customers. Plus you can register the gun for their warranty. Sorry man, but complaining online for not checking with them first is messed up
@@inthehomeshop I thought it was just how the gun was, so I compensated for the strange fan pattern. I should have registered for the warranty... I may sound like a dick but why is the most expensive gun on the market being sent out faulty when they're supposedly hand tested. The gunman, a youtuber got 3 5500x's from sprayguns direct to review. 2 of the 3 were faulty!!! What the fuck! Like a $1000 spray gun shouldn't have issues. An iwata w400 or my tekna prolite, cheap guns have sprayed better and never had issues. I bought a sata 3000 rp nearly a decade ago, best gun I've ever owned and sata has just missed the mark since. I just dont get it.
@@BretBunton I feel bad for yall who have gotten bad one. I personally dont know anyone who has gotten a bad one or had a bad experience with the 55's. What I can recommend, and just try, is call this number: 800-533-8016. Ask for their repair department and tell em what happened. I've dealt with many gun companies over the years but SATA has been the best when it comes to handling things with its customers. Worth a shot😎, I hate anyone spending money and not being happy. But I still wouldve reached out to them ASAP brother😎. Keep me in the loop and let me know!
@@inthehomeshop I really appreciate the info. I have a nozzle set coming from the UK. Hopefully, that fixes the issue. I'll call Sata and maybe send them my old nozzle set so they can maybe see what's up with it. I definitely should've trusted my gut it knowing something was off, but my brain told me, no.... it cant be. It's a sata lol
Do u Know if the HVLP 1.4 satajet 5000 is a descent all around gun ? Do u know if there's a knock off to look out for ? I'm no fan of the HVLP but I'm leaving rookie ville and tryna step the game up , oh is 400 a descent price?
I personally have a few 5000 hvlp's with 1.4 nozzle sets. For me, they help with metallic orientation in solvent painting alot. 400 is a great price if its clean and well kept.
There are knockoffs yes. Engraving is different, air cap rings are different, writing on thr gun is all different. Reach out to Sata with the gun's SAL number and they can authenticate it
@@inthehomeshop I noticed this one does have the green chip in the bottom of the handle , from a bit of research I found the knock offs won't have that mark . I will reach out to sata thanks for the feedback.
Whats a good set up on the 1.2 i ?
Sata kind of went back to their old technology with their air distribution. I have an old sata jet that is built like the new 5500 without the plastic air distribution. In the old gun its all machined in just like the new one.
Yep. I thought the same. I believe it was my old jet 90 that was the same way. I know my 90-2 i have currently is the same as well. I just like its one less part to replace in the grand scheme of things.
@@inthehomeshop I've heard good things about the Jet 90 actually lol
@@djentleman7 nothing wrong with the old jet 90s! Workhorse guns
Lol Ive only seen DB tests performed on pc fans but on one spray guns? Hell the spray booth is way louder than the spray gun lol. I’ll tell what’s really loud , Binks Model 18 gun.Now that’s back in the days when guns were really loud as hell lol
I wanted to see if it was legit. 😎
A paint supply shop told me not to buy the 5500, says he’s seen a lot of problems because of there being no distribution ring
Ive had mine since....a couple months after the gun got released i believe it was.
I havent had a single problem out of mine. There's no issue with them not having distribution rings because everything is machined into the nozzle itself, much like some of the older guns they used to make.
Ive heard the same that they had some issues with some, but with mine I haven't experienced it, so I can't say yay or nay on that one.
BoothTalk bought two of them and haven’t had any problems either
Is your pressure guage in psi? I bought one and it's in bar. . . Is there a way to change it?
@@conceptdesigns4100 Its bar or psi. Can't change it
@@jeremyoetken2094 that really sucks since that's the entire reason I bought this gun so I could see the pressure right there but I guess I should have done more research. You'd think 1000$ for a gun you would be able to change it. 😕
Just want to ask. I purchased sata x 5500 rp 1.3 O-pattern. Can i just simply buy a nozzle set of hvlp 1.2 i-pattern and switch aircap between 1.2 and 1.3 fluid tip?
RP and hvlp are completely different.
Like what you did in this review. You have 1 sata x 5500 and you have several nozzle kit. Instead of buying 2 sata X.
@@iammcmags6557 keep within the hvlp or RP setup of the gun and you'll be golden😎
@@inthehomeshop thanks for the time.. 😊
@@iammcmags6557 anytime man. I dont upload videos regularly, so I try to stay on top of comments and helping
Hi im wondering if you have used 1.4 I or 1.4o nozzles foe clearcoat. What would you suggest?
havent been getting comment notifications for some reason....sorry!
It all depends on what clear you spray and how you spray it. This is why I always tell people to setup a demo first!
Can you put a link to where I can get the kits with the air caps, nozzles, and needles
Spraygunsdirect has them. Also PMP. Only 2 sites I found them on. I had to get some for my faulty 1.3 I nozzle. Bottom part of the fan is uneven
Muy bueno saludos amigo
I bought the 1.2 I and I spray spies hecker hi tech. Works good for base. clear I'm having to play with. What psi are you spraying clear through it
Depends on the clear. I'm around 27
Didn't spray pattern was off it was heavy on top it has issues wasn't even fan heavy spray on top and not as much on the bottom
What didn't spray? If there was an issue, send it back and they'll warranty it
SATA has brainwashed you guys it's hilarious but I'm not gonna tell anyone how to spend the money they earned
You can tell me .what gun should buy to paint with. And good price
Score a devilbis tekna pro lite. In. The nozzle size of your choice. All depends on whaaaa t you are using. Viscosity wise
I have put my pro lite through hell and back.. Still sprays beautiful... Idk why.
And thr guy asked for a good price.. Don't try to tell me sata are priced well. And I have them. I have a gun buying affliction
@@michaelramos3116 best bang for your buck is an iwata lph-400. Don't buy SATA
What is the difference between the 5500 and the iwata Hakone?
iwata is one of the best gun , and devilbiss ....
@@DjJoeEmeric and Sata Is number 3??
@@Jaimerga after i have tested and using some of them for me Sata is at 3rd place.
I dnt really care how loud a gun is 😂😂😂
Nor do I. But I had to do it to prove it true😎
BoothTalk oh ok👍🏼
I just bought a sata jet x5500 , 1,4 if is good for base?
Depends on what you bought, what your preferences are, and fan pattern. Hvlp? Rp? I or O nozzle? What are you used to spraying with? Did you demo one? Did you download the nozzle finder app?
10-12 bumpers in a day? You're definitely not the one prepping them
Never said I was😂. Last shop I was at, it seemed like all we did was bumpers.
what about comparison jetx 5500 and jet 1500 solv ?
There is no comparison. 2 totally different guns. Go watch my 2 videos on them
what about the HVLP ?
Didnt buy an hvlp. Got the RP. I will only ever tell you guys about stuff I've personally used. I'll never tell you hearsay about a product😎
@@inthehomeshop I was just curious because I just started using my new Sata 5500 guns a week ago. I have an RP 1.2 O for clear and HVLP 1.3 O for base (solvent). My Sata rep recommended HVLP for base coat. I used an RP for base coat for a couple of years with my Sata 5000 with no problem. I guess the HVLP doesnt over atomize the base coat and is more material saving.
@@jandrew93 all good. I'm just saying basically I wont comment on things I havent used.
In the 5000s, I use an hvlp for metallics and always have. Love em
@@inthehomeshop ok thx.
Why would u put plastic inserts on the fluid tip. Disgusting made to break designs
👍