Thank you for your comment! I think that it is no problem,because Japanese atmosphere isn’t dusty. My Toyota Celica had no filter longer than 20years also, and it was no problem. But please don’t forget that it depends on each place.
Thank you for your question. The wheels were painted with urethane paint. As you pointed out, the paint peeled off when installing the tire. So I touched up after work. If you don't want it to peel off, I think it's better to use powder coating or black anodized rims. Thanks!
That is such a great build. One question about the wheels, did you have to go a size up to fit the bigger tires or are these the stock rims with just paint ? I'm thinking about installing Duro classics on mine but I'm not sure the back wheel will fit with the stock fender. Anyways, love the bike and thank you for documenting all the process. Cheers from Switzerland 🤘
Thank you for your comment! Yes,the rims were the stock. I just painted them. The rear fender was 4inch wide flat type,and tire size was 5.00-15. I think that the tire size is no problem for the stock fender. I’m interested in that you are in Switzerland. Is Reble popular in your country? Einen schoenen Freitag!!
@@kensvlog49ers thank you so much for taking the time to reply. コメントをありがとう! i'll try and source some duro tires for it. as for the rebel in switzerland, it's not a very popular bike and thus very cheap to find. I like it a lot since it's easy to work on and to find parts for it. Mine was left sitting in a outside for more than seven years, but with a little bit of care it's now back on the road. The tires are a bit dry, which is why I'm looking for a replacement.
Thank you for your comment! I used universal parts. The brake line and cables also. If you can not find them, you should search them for CD250 or LA250 also. Thanks!
Thanks for your question. The tires are Duro Classic. The size for front is 4.00-18, and for rear is 5.00-15. But I don’t make sure,that you can buy it in your location, because the tire is ordered to the Duro by japanese bike shop.
@@kensvlog49ers want to ask another question, that is the gb250 front fork right? in case that I couldn't find any similar fork to gb250, i should probably shorten the fork by cutting it using stock fork, but how much cm should I cut my front fork to have a similar look like this?
Yes, that's right. I set up inner fork of GB250 and bottom case of Rebel. The length of GB250 is 60mm shorter than Rebels. Both bottom cases are quite same length. If you shorten it 60mm, it would be same dimension as mine.
@@kensvlog49ers hello again bro, want to ask another question about the front fork. If GB250 front forks doesn't available on my online shop, can I use a cg125 front fork as an alternative? is it similar to gb250 forks?
Thank you for your comment. I can understand that there is an opinion as yours, because it depends on each person how do you feel about something. And you are correct that I made it from scratch. But I could get big satisfaction when I could finish it. That’s all! Thanks!
Awesome, Great job young man, I have one will be doing the same!!
Thanks for your comment.
I appreciate so much!
Off course you can try it!
If you need further information for it, please contact me every time!
love the rebel! great taste in tires and color
Thanks for your comment!
It was the best product of mine!
Great job!👍🏻
Thank you!
#BikerFoirce..WOW w w w )))),..NOW and THEN ,.. LOVES REBEL !?!
Thanks for your comment. Yes, it’s really good motorcycle!
@@kensvlog49ers YES s s s )))),.,.REALLY GOOD ,..THE REALLY LOVED ,..HA Ha a a a !?!
このまま買い取りたいくらい好みなカスタムやわー
新型のレブル乗ってるけど旧型もかっこいい
コメントありがとうございます！
旧レブルは本当に完成度の高い本格アメリカンだったと思います。ベースとしても最高の素材です。
新型レブルは最近よく見かけます。こちらも大人気の様ですね！
awesome!!!
Thanks!
Excelent work. Congrats. ! Do You have not problem for use the carb without air filter? It is not bad to the motor?
Thanks !
Thank you for your comment!
I think that it is no problem,because Japanese atmosphere isn’t dusty.
My Toyota Celica had no filter longer than 20years also, and it was no problem.
But please don’t forget that it depends on each place.
@@kensvlog49ers ok. I understand. Excelent country . Thanks
If you will ride on dart, your motorcycle might need air filter.
What kind of paint did you use to paint the wheels ? Is the paint peeling off the rims?
Thank you for your question.
The wheels were painted with urethane paint. As you pointed out, the paint peeled off when installing the tire. So I touched up after work.
If you don't want it to peel off, I think it's better to use powder coating or black anodized rims.
Thanks!
That is such a great build. One question about the wheels, did you have to go a size up to fit the bigger tires or are these the stock rims with just paint ? I'm thinking about installing Duro classics on mine but I'm not sure the back wheel will fit with the stock fender.
Anyways, love the bike and thank you for documenting all the process.
Cheers from Switzerland 🤘
Thank you for your comment!
Yes,the rims were the stock. I just painted them.
The rear fender was 4inch wide flat type,and tire size was 5.00-15.
I think that the tire size is no problem for the stock fender.
I’m interested in that you are in Switzerland. Is Reble popular in your country?
Einen schoenen Freitag!!
@@kensvlog49ers thank you so much for taking the time to reply. コメントをありがとう! i'll try and source some duro tires for it. as for the rebel in switzerland, it's not a very popular bike and thus very cheap to find. I like it a lot since it's easy to work on and to find parts for it. Mine was left sitting in a outside for more than seven years, but with a little bit of care it's now back on the road. The tires are a bit dry, which is why I'm looking for a replacement.
I got you!
I hope that you can find out the Duro tires and ride it again soon!
Good luck!
Very nice. Where did you get the shorter brake line, clutch and throttle cables?
Thank you for your comment!
I used universal parts. The brake line and cables also.
If you can not find them, you should search them for CD250 or LA250 also.
Thanks!
#BikerForce..WOW w w w w )))) ,.,.LOVE THE BEST ONE ,..OW w w w w w !?!
Thanks!
レブルに乗ってるエンジンはタフで扱い安くて、街乗り楽しく燃費も良くて（笑）外装カッコよくなって最高ですね、高速は怖そうだけど
コメントありがとうございます！
確かエンジンはCD 125のボアアップバージョンでしたっけ。すごく乗りやすいバイクでした。
リジットサスだと、高速じゃ跳ねて怖いでしょうね汗
@@kensvlog49ers CD250とエンジン同じかも？ですネ〜CDもタフで良いカスタムベースかも♡
ビジネスバイクはタフで乗り易く設計されてますからね〜
海外ではボアアップキットあったので入手してみたかったんですが、残念ながら実現できませんでした。
What type of tires are there ?
Thanks for your question.
The tires are Duro Classic.
The size for front is 4.00-18, and for rear is 5.00-15.
But I don’t make sure,that you can buy it in your location, because the tire is ordered to the Duro by japanese bike shop.
@@kensvlog49ers Thanks for your response. I can buy them in my location.
is that a new frame or still a stock frame?
Thank you for your question. It’s stock frame.
@@kensvlog49ers want to ask another question, that is the gb250 front fork right? in case that I couldn't find any similar fork to gb250, i should probably shorten the fork by cutting it using stock fork, but how much cm should I cut my front fork to have a similar look like this?
Yes, that's right. I set up inner fork of GB250 and bottom case of Rebel.
The length of GB250 is 60mm shorter than Rebels. Both bottom cases are quite same length.
If you shorten it 60mm, it would be same dimension as mine.
@@kensvlog49ers cool, thanks for the information. really appreciate it. 🙌
@@kensvlog49ers hello again bro, want to ask another question about the front fork. If GB250 front forks doesn't available on my online shop, can I use a cg125 front fork as an alternative? is it similar to gb250 forks?
I want to know the model please
Hello,
Thank you for your message.
www.bikebros.co.jp/catalog/1/178_2/
This web might help you to know the information.
Please, check it up.
I dont like that back fender and ugly seat! and u basically builded a bike from scratch
Thank you for your comment.
I can understand that there is an opinion as yours, because it depends on each person how do you feel about something.
And you are correct that I made it from scratch.
But I could get big satisfaction when I could finish it.
That’s all!
Thanks!