How to wire Front Lower DRL For Toyota C-HR
Vložit
- čas přidán 22. 04. 2021
- Front Lower DRL Wiring For Toyota C-HR
Green wires from Car Turn Signal to what ever color wire your DRL kit is labelled with.
Red wire from Side Marker to Fused + Wire from your DRL kit.
Affiliate Link:
DRL Driving Lamps Compatible with Toyota C-HR 2016 2017 2018 2019 - amzn.to/3dJFosS
Quick Splice Wire Terminals T-Tap Self-stripping with Nylon Fully Insulated Male Quick Disconnects Kit - amzn.to/2QOwMbw
NEW - HIKARI 2021 Acme-X 9012/HIR2 LED Bulbs - amzn.to/3cQvoN0
OLD (alternative) - HIKARI 9012 LED Bulbs - amzn.to/3cN46XK
Lets Connect:
Instagram: forged_garage
Facebook: / forgedgaragetv
Email: forgedgarageTV@gmail.com
My Video Gears
Sony A6300
Alternate Model Sony Alpha a6400 Mirrorless Camera - amzn.to/2KQutS8
Sigma 16mm f/1.4 DC DN Contemporary Lens for Sony E (402965) - amzn.to/3root44
Rode VideoMicro Compact On-Camera Microphone with Rycote Lyre Shock Mount - amzn.to/37F8x5v
Lexar Professional (LSD64GCBNA1667) 1667X 64GB SDXC Uhs-II/U3 - amzn.to/3rm1W7V
Lexar Professional SDHC/SDXC 1667x UHS-II 64GB Memory Card (3-Pack) - amzn.to/3mDouNS - Auta a dopravní prostředky
where do you connect the red and black wires?
Salamat kuys !!
Hi I have 4 wires on mine but one is blue light which I not use, so I presume I connect red to daytime drive light ,black to earth, and yellow to turn signals, ye is this correct please,appreciate your help ,thanks
Sorry i cannot answer it, but the best way to test this is connect the wires directly to the battery, black for sure is ground, then connect the other color wire one by one to the positive terminal to see what light they correspond too
OK 😊
i connected my drl for my 2020 but the red wire im still confused how too connect it dont wanna mess up any wiring
Shoot me a message I’m glad to help
Instagram: instagram.com/forged_garage
Facebook: facebook.com/ForgedGarageTV
Email: forgedgarageTV@gmail.com
Ayos lods
Salamat!
I have 4 wires ,black,blue,yellow,black, how to wire please help ,thanks
Blue and yellow is likely the drl and signal function 2 black wires idk why you have 2 black wires but one of the black should be ground. Send a pic of the wires on my email or IG
What's park lights, I thought I would conect red wire to the day time lights ,yellow to directional lights.
HELP PLEASE. I installed aftermarket taillights everything works except the DRL lights. What can it be please help. Thank you !
Send me a message on iG
How did you get to the access point? I’m good on wiring, it’s just how do I get to that part so I can install it
I don’t know which are you referring too.
The triangle spot where you would replace it with the lights
I got them from aliexpress
Did you had to pull out the bumper to install the DRL lights?
I did not, i just accessed it through the fender liner
Thanks 👍
Where did you connect the black wire?
Negative terminal of the battery
Can this also fit to my 2020 c-hr?
No, because 2020 is facelifted with a different front bumper cover.
This is the one for 2020 amzn.to/2YDWQun
Thank you so much for the link! U the best!
You’re welcome
Too late, napagawa ko na akin, should've wait a little longer I knew I can diy it.
Thank you though you 🤘
Haha! Sorry, sobrang busy kasi sa pag aalaga ng bata.
Oks lang, btw, baka may link ka how to wire fog lights with switch? 😁✌️
@@CARguyDAd ang pagkakaalam ko may abang na harness na yung foglights, pero hnd ko lang alam papano heheh, noon nag diy ako sa fog sa ibang sasakyan nka tap lang din sa side markers
Kuya, paano mo sya nasecure yung drl? Yung akin kasi custom install e
Ghetto ung pagkaka secure nung sa akin, pero need lakihan mga butans ng drl tpos cut ko pa ung parang ears nya, hen secured it with flex tape
I wish cars weren't so foreign to me lmao
It’s very easy, I’m not good at wiring stuff myself, but so far I haven’t cause any fire yet in my car. Lol
Is that in Florida?
Washington State
Ooh ok i thought it was Florida thank you 🙏
Me puede ayudar
What is it?
Estoy busncando donde conecta el cablr azul
@@Victorlopez-dq1ms i suggest that you test it first, connect the blue wire first into the positive terminal of the battery and then connect the black to negative to see what function it does on the light.
Bro my kit came with both lights wired into a box, and then a wire coming out with only one red, green, white and black wire. How am I suppose to get them to both light? 😂 Lord
Do you have the same design?
@@Forged_Garage no, I got silver holders, they just forgot to write that the white is for pilot and green is for passenger. Lousy packaging