Video není dostupné.
Omlouváme se.
Putting 37" Tires Onto My Stock 2024 Toyota Tacoma
Vložit
- čas přidán 8. 03. 2024
- In this video, we take my Relations Race Wheels RS2s wrapped with 37” Nitto Recon Grapplers, and stuff them onto my 2024 Toyota Tacoma. We then attempt to drive it, and it goes, ok?
Code: TRDJON at RRW to save $$ on wheels
Become A Member: bit.ly/3K6vOhv
DISCOUNTS HERE: linktr.ee/trdjon
My Instagram: / trd.jon
Affiliate links allow me to produce more content for you all. It also allows you to get ideas of future upgrades you may want to have! Thank you for your support.
#toyota #trdjon #trd #trdpro #4Runner #Tacoma #Tundra #Overland #offroad #trail #truck #trdjonpitcrew
You should still paint the rims solar octane
BAHAHAHAHAAH
still stand by my solar octane roof wrap comment!
Reupholster the seats in solar octane lol.
I agree with your wife about the black wheels, they make that blue hue show out more on the paint.
35 and 37 are probably one of the best size to slap on a Toyota rig, really on any rig. the Taco looks nice with the Bronze on 37's.
She's right, the black looks awesome.
black looks like you just had some black rattle cans laying around, and had to do something with them.
33's or even 35's with the lightest tire /wheel combo for sure in OG polished aluminum!!👈👌
Going for light for sure. Some forged wheels maybe ;)
88 rotors tacoma looks amazing with the polished KMC wheels.
Nice... Gonna say Bronze because it adds a little bit of color to match the mud you'll put on it. Your wife makes good points too though, tough choice.
33’s look really good. Nice OEM plus look to it
For sure does.
The bronze wheel is growing on me
It looked really good
Wow both colors look great!! But for me I think 35 with blacks rims would look amazing with the underground color.. Have a safe trip to AZ Jon. Can't wait for the next VID!
Thank you!!!!!!!!
Bronze looks good! Better than black I think
As of tires, definitely get something agressive like ridgegrapplers or yokohama geolandar g003. Helps to finish the sharp look of the 4th gen tacoma
33’s in black all day
The bronze you're running is a colder temp bronze so it doesn't clash with the colder underground hue too badly. I think if you can get a similar colder gloss matte grey or similar finish black would look great. I would personally go for some Volk mag blue te37's with 34 or 35' with minimal poke. Excited to see the decision you make!
If 35s will fit with the right width and offset and no major mods in the wheel wells, go with those. Matte black wheels, no doubt. As usual, listen to your wife! :)
lol 😂
I think I may be in trouble “the wife is home” is when every guy says that😂😂😂
😂😂😂
Already have bronze on the tundra so might as well go black on the taco. I love the fact they take 37’s, I’d send it with the right wheel offset after the lift. If my 3rd gen could take 37’s without all the major cutting I’d do it, plus I don’t have $20k to spend on portals. 😔
Tundra will be getting some 18s soon and will not be bronze ;) yea man. Portals are great but $$$$$$
loving the daily uploads and kind of vlog style. please keep doing what you do. it’s looking great! i come back from uni every single day waiting for you to upload
Awesome! Thank you! I appreciate that so much!!! Will try to get as much content out as possible for you.
Stuffed like a Turkey on Thanksgiving Day! 37's will need a lot of additional work to make it "Come Together" for pure off roading! Gearing/lift etc, but 33's in my opinion are the perfect balance of style, performance and off road capabilities! But for that eye popping candy, you can't beat the 37s!
Completely agree with all man!!!
Have a new silver off road ordered so will be watching your videos to see what you are doing.
Heck ya. Can’t wait for you to get it!
I think the Enkei MATRIX Wheels in Brushed gold would look amazing with the underground color
The 33's look way better.
The fill it nicely
33 is 3% over stock
37 is like 15%
Goodbye warranty 😅
@@joeblack1052tires void warranty?
@@RangerRickTV oversized tires
@@RangerRickTVnot unless they prove that the failure was caused by the tires.
The black wheels look the best!
35s should be perfect!
They honestly would!
@@TRDJon i would refrain on putting on 35s on this truck and then using 4wd, considering how light duty the drivetrain is..
tundra pro should come with 35s 😊
Yea it should have been
Thank you for your courage to take chances and risk of some damages on your new Tacoma, so others can follow knowing what to do and not to do. 👍🏽 👍🏽
Glad to help lol
With 37s, even if modded/cut and they would fit just fine, your range on a full tank will go down to 150 miles or less. 37s and tiny gas tank don’t really mix. 😃
Yea tooooo big for sure.
Black looks great. Goes with most anything! Bronze looks awesome too! Hmmm… first world problems 😂
Looking forward to ALL the vlogs coming our way! 👊🏻
Heck yes!!!!
Excellent work Jon it’s like watching a tv show well done with the 🌮 adventures.
Wow, thanks!
Love bronze in general, but on your truck def black looks better
I love the 37s on it just think if you put a lift kit along with the 37s oh my gosh it would look good.
Wild bro haha
How the heck was he able to put 37’s on it without a lift kit anyway? 35’s barely rub on Taco TRD Pros and they have an extra inch and a half of ground clearance
Maybe this will help. Every Underground Tacoma I've seen except for one that has been done at Westcott so far has had black wheels.
My thoughts exactly
Love seeing you do actual work. 😂
Had to ice my back after lol
Westcott has fit 35's with a lift and the right offset and doesn't seem to rub anywhere.
Yea offset and lift will help a lot.
They totally fit if you live in Florida
#Floridaman
I dig the black. I dont have a taco but enjoy the content and always loved the Tacomas. Keep up the videos.
Will do! I appreciate you watching.
I vote black on the wheels. That color looks great with lots of flat black parts
Glad you’re having fun! Wanted the new Taco, but went with the Pro 4X instead. Just sub’d and love the content!
Thanks for the sub! Congratulations on the new Nissan!
The rocker area is metal. It’s part of the front fender.
Thanks! Just felt and sounded different
I think 35s would be perfect! 33 look stock but 35 looks a little beefier
I like that you are using a jack stand. Too many people today think that they don't need to. Work safe, stay safe and keep your legs.
Black Wheels! 🤘🏼
That poke with the black RRWs looks perfect to me....
Yea???
34’s out of the gate is where it’s at.
35 Bronze bro, that looks sweet on that color truck. Black rims makes them tires and rims looks like donuts 😅
Black wheels!
I think machined wheels would looks best with this new underground color
35" tyres on those black wheels is your game I think.
35s are the way to go and 0 offset or +18 for sure. Machined would be money.
2" lift and the right offset and it's mint.
Let’s goooo
have been waiting for someone to dive into offset, looking forward to what’s coming to help me answer some questions while i wait on a truck to arrive. i have been shopping wheels, but want something that meets or exceeds oem spec with less weight to let that turbo sing a little more. the factory offset limits me a little. i am deciding between rays and relations…
this vlog style can be hit or miss for most channels. your recipe works well since you are not relying on a cohost to be firing on all cylinders every time the record button gets pressed. good charisma and very relatable discussion.
i didn’t think i would say this but the bronze wheels deliver the wow factor on a subtle delivery. bronze also surprised me because the colors seemed to pull in the front turn signal to be more in spec with the whole aesthetic.
satin black looked great, but i bet machined wheels would deliver the wow factor with a more intense delivery. i’m excited to see how much reflection the machined wheels can deliver…i hope they can pull in the blue hue from the underground paint.
wow this reply got long. if you’re still here thanks!
I appreciate this comment so much! Check out icon alloys new CZcams video. They dive into offsets with different tires. Jeff Westcott does too with several trucks he just posted about too. I will try to document more as well.
I appreciate the love for the vlog style too. Not trying to be over the top but also still keep it educational as well. Thanks!!!
Gunmetal would look great on that truck
They would for sure
Have to agree, 33s look better but with the bronze wheels the Tacoma looks amazing 🎉🎉
I agree!!
A tall skinny 35s would work easily..appreciate the experiment
For sure!!!!!!
I approve this video
Idk how you drove your truck! Hahahab
all my vehicles have flat black... i always wanted to do white wheels for that one of kind look. keep up the great work.
35's
White wheels would POP.
Black with 33’s
Beauty!
I'll go with the black rims, with 34s. In my personal opinion, the 37s looked too much. Actually, they looked a bit silly. Man, your 4runner looked good, pulling into the driveway.
34s will be perfect.
3 inch lift. 37s. Your welcome😂❤
The Bronze!
Man Tacoma looks so good with 37,But 35 would be the perfect size.
Those black wheels are sick with underground damn
They look good for sure
Send it. Bronze with 37s. Reminds me of those Baja Tacos that runs the sand dunes.
Hey Jon, I like matte black for the wheels. I think it goes good with the handles and other black on the truck.
I think you could benefit from on of these tire tools. Check it out
Gaither TRAC Tire Jack w/ Tire Roller Plate - GTJ-01/GTRP-01
I’ll look into them. Cuz my Jack is way too low pro.
Black with 33”
I would go with 35s with +25 offset I wouldn’t recommend going any bigger 37s look sick bro 🤙🏾
Look cool but wayyyyyyy no functional.
Looks awesome!
I'd def go with black but either is good!!!
I think the 33's look and fit better. Also go with black
0:05 my same reaction every time I see a tiny mark on my 4runner😂😂
Dude!!! I’m glad you knew what I was doing.
Bro your garage is awesome
Thank you man. Lots of work. But just starting. Need a barn 🔥😉
37 is beef for days, 33s look good but for a good lift 35s is the sweet spot
Thanks for trying this so I won’t have to haha
Hope you enjoyed!!!! Haha
STEALTH CUSTOM SERIES - Bronze or Matte Black. Can’t go wrong with either.
RRW’s are typically readily available in contrast to SCS.
I actually prefer bronze. Black makes them wheels looks like donut rims lol 😅
I think it looks great Jon. I also gotta say i'm glad you didn't take it out on public roads like Mark did. That would be a huge safety concern for you and other drivers without having full maneuverability. But i apprecate you sacrificing your fender liners to test it out for us.
A 37 x 11.5 might actually work! Kenda Kleavers come in that size.
And Bronze wheels for sure.
The black wheel era has thankfully come to a close.
I think you’re right. Polished/machine is coming back too.
I have method wheels in the gloss gunmetal and they’re sick. I think they would look great on your truck
Oh that would!
Definitely bronze!
Great job on the video Jon! Thanks for making it. I can't wait to see what you get done at Westcott.
The wife Got home !! 😂
RUN!!!! Hahaha
37’s looked macho.
33s with black wheels
Powered by solar octane.
Were you near Sam’s in Pinellas Park today? I saw my first 4th gen Tacoma when I was leaving Sam’s. Same color as yours. Looked really nice.
With the weak drive train (TFL) in 4th gen taco's, I would not go beyond a stock tire. You may argue it is the ADD actuator made to break at severe offroading. First it wasn't a severe offroading. secondly, replacing a CV is 10 times faster and cheaper than fixing the ADD actuator. I got 4 Toyota 4x4's (hilux, 4R, LC and 3rd gen taco) and driven way extreme than what TFL did and no issues with drive train.
33s look the best
Yea the off set needs some fixing but for a stock truck that’s perfect.
I think machine silver would look great
That’s what I was thinking. Prinsu has it on theirs and I weirdly didn’t like it as much as I thought I would.
Deym 37🔥
So thicccc
Im partial to the bronze looks awesome
That’s awesome that you experimented and sacrificed your truck just a little. Think 35’s will fit ?
Oh most definitely
Black 🎉
wow jon you are toyota family.
Leave the 37x12.5R17, look sick 🎉🎉🎉🎉, trim the plastic😅😅😅😅
What kind of lug nuts are those? They look pretty secure. I’m in the market for good lug nuts for the wheels I’m getting for my 4th gen 4Runner
Relations Race Wheels sells them on their site. 👍🏼
Bronze looks good 👍👍👍👍👍👍👍
Dude it does!!!
Im getting a 4th gen TRD sport soon. First time owning a truck and excited to mod it out. Would I need a lift kit for 33s? And if I put 33s does that put excessive wear on the truck or would it handle it fine? would also love a list of mods that Tacoma owners find essential.
Get the cutting wheel and start cutting.
Black looks better
Hello, can you please tell me the brand and specs of the 37" bronze wheels and tires?
My opinion, bronze. I never liked black wheels. They wash out with the black tire. Wheels should stand out and make the look of the vehicle. I know I'm old school!
TRD JON how do you like the Nitto Recon Grapplers?
Love em!!!!