33 Inch Tires NO LIFT! Toyota Tacoma | Method Race Wheels | Nitto Ridge Grapplers (THE RIGHT WAY)

In this video, I show how I was able to fit 33 inch tires on my 3rd gen 2021 Toyota Tacoma with no rubbing! The combo i used in this video is a set of Method MR309 Grid Matte Black 0mm offset Wheels wrapped with 285/70R17 Nitto Ridge Grappler Tires! Hope this video helps you to be able to fit your wheels on your Tacoma!

[@austinwade3194]

You should of been able to adjust the caster via the lower control arm to get the necessary clearance from the pinch welds. I believe stock it is set at 2.4 degrees and you can move it to about 4.5 degrees (but 3.5 you should be good) which results in the wheel moving a 1/2" forward.

[@ernz6718]

First, your way of checking clearance is the best so far on CZcams. I had a question tho, why cut so high on the plastic? I want to do the same, get as much clearance that does t rely on a lift. Thanks! 🤙🏼

[@FloGarage]

The only reason I cut so high is because the mounting clips are there. I didn’t want part of liner hanging down and possibly get blown around by driving on the freeway

[@ernz6718]

Makes sense!

[@maskedminer1262]

Get this man a lift kit!

[@Thattrailboss2019]

What year is ur Tacoma I’m ordering u a leveling kit 2in

[@nickrana7152]

Title should say “no rubbing after minor modifications”

[@JamesReedy]

Ughh bro, but crap is gonna get everywhere in places it ain’t supposed to go.

[@scottfergusson8411]

OR……. Put on 255/85 R16’s

[@JamesReedy]

This is what I’m considering, it’s only 10mm narrower than my 265/75/R16 and honestly with 0 offset wheels they poke out past the fender a bit and throw shit. It looks nice, but pizza cutters, lift, SPC upper control arms I’m hoping a 255/85/R16 could be run without cutting anything at all?
Also wish there were more 255/85/R16 options. No K02 or K03’s iirc.

[@sinister184]

You can buy a lift for a few hundred bucks. No need to hack your truck to pieces and ruin the resale value.