Why This Tiny Honda Engine Can Make 1000hp

Sdílet
Vložit
  • čas přidán 11. 05. 2023
  • Thanks to Factor for sponsoring today’s video! Use code DONUT40 to get 40% off your first Factor box at bit.ly/41JC9bA !
    We got our hands on a K20A from the DC5 Honda Integra to see what makes this one of the greatest engines Honda has ever produced.
    Special thanks for Jose for lending us his K20A-swapped DC2 -- / type_r_jose
    And shout out to Club DSport for all the help with the K20A -- clubdsport.com/
    Donut = We like cars, and we like making videos about cars. Hopefully our videos make you like cars too.
    Subscribe for +50hp
    Notification bell for +100hp
    Get a Donut shirt ►►www.donut.media/
    Check out our membership program Donut Underground!
    ► / @donut
    Our instagram has good memes: / donutmedia
  • Auta a dopravní prostředky

Komentáře • 6K

  • @edwardinthemiddle
    @edwardinthemiddle Před 11 měsíci +8336

    This doesn’t ruin the fact that Hector’s running 3 spoon engines…

  • @DarkOmega150
    @DarkOmega150 Před 11 měsíci +4859

    As a car noob I really appreciate all the explanations and the diagrams+animations you guys put in your videos!

    • @Itsasupramaniswear
      @Itsasupramaniswear Před 11 měsíci +91

      I absolutely don't know everything, but I have learned so much just by watching their videos for the past few years. Now I can do almost any job on my SC400 even if it makes me wanna die. But keep learning man. I think everyone likes more people in the community that are willing to learn and do the work.

    • @crisstw4454
      @crisstw4454 Před 11 měsíci +18

      @@Itsasupramaniswear yeah these guys are incredibly good teachers it makes looking at the mess of my engine bay easer to understand lmfao now I have a pretty good idea of my car. I also love they work on so many cars so you always learn sum new

    • @silmarian
      @silmarian Před 11 měsíci +7

      I agree. I'm getting back into cars now that my kids are older and I've got less mom stuff going on, and they really help me get back up to speed. I'm hoping to buy my first project car this summer and work on it with my (teenage) kids.

    • @Itsasupramaniswear
      @Itsasupramaniswear Před 11 měsíci +6

      @@silmarian I got into cars at like 14 or 15, but now I'm 18 and I'd say that a lot of the car community rn is people my age that don't know what taste is to be polite like i know a bunch of kids that don't understand that loud doesn't mean it sounds good and that straight line speed isn't all that matters but you can't explain that to people who have daddies money and are too far up their own *ss to listen

    • @ps.6023
      @ps.6023 Před 11 měsíci

      yet a lack of research

  • @A2ON
    @A2ON Před 11 měsíci +578

    Let’s be honest - Zach and Jeremiah are the best combo on donut. Two great personalities that keep us entertained and things interesting!

  • @Sr.Fluffioso
    @Sr.Fluffioso Před 10 měsíci +114

    I love the fact that they actually show sometimes things don't go according to plan whereas big shows never show the issues you run into

    • @theExperiencedVirgin
      @theExperiencedVirgin Před 6 měsíci

      Great observation!

    • @xdemon5015
      @xdemon5015 Před 28 dny +1

      Also useful for when you're watching to get ideas. I'm looking to build up a car and was planning to do a lot of the work myself, but now I'm noting what I'd rather take to a professional place to get done, and what I'm actually comfortable to do myself. All thanks to this channel, it's really awesome.

  • @Coooastal
    @Coooastal Před 11 měsíci +737

    Engine analysis videos are easily one of my favorite types of videos y’all make!

  • @reemeruxd
    @reemeruxd Před 11 měsíci +420

    Shout out to the video editors and animators. All the titles, infographics and sfx were exceptional on this episode.

  • @duckispve5283
    @duckispve5283 Před 11 měsíci +24

    Can I just say that for someone at the age of 32 just now getting into fast cars, this channel is the absolute best. You all break it down and use pictures and cartoons lol it’s the best. Finally got my Silverado how I want it. Surprisingly the JDM scene looks like a lot of fun coming from a country boy 😂

    • @_Clem_H_Fandango_
      @_Clem_H_Fandango_ Před 3 dny

      Getting into cars at age 32? Son you best turn in your Redneck Association Card, your daddy failed you

  • @jacquescrusan9500
    @jacquescrusan9500 Před 9 měsíci +14

    5:29-5:42
    I had this same issue putting together my LS engine less than 4 days ago, using an inexpensive ratcheting ring compactor. 2 things in conjunction that I found worked were:
    1) ensuring the piston was centered both vertically and horizontally in the compressor as I tightened it, while ensuring at least 10mm of piston skirt stuck out the bottom so that when placed on top of the cylinder, I could use the skirt to help guide the piston into the bore and center the compressor above it.
    2) when inserting the piston, I had to give it a truly solid thwack so that it would fly out of the compressor and deep down into the cylinder in one go. Applying oil on the outside diameter of the piston and rings, and the inner bore of both the cylinder and the compressor helped out a lot in this endeavor (and no, I would never install pistons into cylinder bores that weren't pre-oiled first).

  • @3000dudeman
    @3000dudeman Před 11 měsíci +544

    Zach and Jeremiah are definitely the best guys to pair up on an analysis video like this. They both have the best understanding of actual mechanics amongst the guys at Donut.

    • @ryland69420
      @ryland69420 Před 11 měsíci +15

      Haven’t seen Aaron in a long time. He was very fluent. Wonder what happened to him.

    • @iiGingiey
      @iiGingiey Před 11 měsíci +17

      Now if only Zach could figure out his guts so he didn't get the squirts all the time

    • @iiGingiey
      @iiGingiey Před 11 měsíci +9

      ​@@ryland69420 from science garage yeah he was great and may even be the reason why I found donut, but what I heard is he got a family and started doing something else, also donut has gone a different direction as well from what his videos where

    • @aaronembry9692
      @aaronembry9692 Před 11 měsíci +5

      ​@@ryland69420 I've seen him on a Motortrend show called Runs Good. It's just okay.

    • @gdijkema
      @gdijkema Před 11 měsíci +17

      Zach is a trained auto technician and Jeremiah studied mechanical engineering. Pumphrey and Nolan are "just" actor/comedians who like cars.

  • @Plimpert
    @Plimpert Před 11 měsíci +257

    More like this please! Jeremiah’s attention to detail with the concerns over the tensioner was such a related thing to leave in, better to spend the time and double check before it’s in a car. Can’t wait to see it in the EG!

    • @E1337Jerk
      @E1337Jerk Před 11 měsíci +2

      Maby it has something to do with a mechanical engineering degree???❤

    • @dat_bouy
      @dat_bouy Před 11 měsíci +1

      I nuked a k20 because of that tensioner.....

  • @jacobporter7216
    @jacobporter7216 Před 9 měsíci

    Thank you Mr. Burton and Mr. Jobe for breaking down these videos so well for someone like me who don't know anything about cars to where it is so easy to follow along and learn so easily. You guys are great at what you do.

  • @streetstormer3845
    @streetstormer3845 Před 11 měsíci +31

    I love these videos when you explain certain engines. I’d love to see a 4A-GE engine video!!

    • @MusicWisp
      @MusicWisp Před 2 měsíci

      As someone with a 4a-fe, I would love that. I know the ge is better and more aftermarket but haven’t found a good explanation why

  • @alcoyot
    @alcoyot Před 11 měsíci +488

    Just look at the quality of those cast aluminum parts. They look flawless. The Honda makers and quality control are just perfectionists, so proud of their craft. I work in a hospital laboratory and I can appreciate this greatly, because for me making a mistake is never an option, it could result in someone dying. Taking this pride in the quality of the things you create has a powerful effect on the soul, and I’d recommend anyone to try it.

    • @rayzecor
      @rayzecor Před 11 měsíci +20

      I am a programmer, not nearly as impressive as someone that is working hands on with an actual product, but that validates your point even further. I can say with all confidence that there is no single better feeling than having written some really robust and elegant code. Sometimes I want to just sit there and look at it

    • @HTOP1982
      @HTOP1982 Před 10 měsíci +4

      @@rayzecor Even better when old-you helps current-you after a stackoverflow search...

    • @nicholaslopez4170
      @nicholaslopez4170 Před 9 měsíci +10

      ​@@RepentandbelieveinJesusChristrepent diz nut

    • @tomhullick6557
      @tomhullick6557 Před 8 měsíci +2

      @@RepentandbelieveinJesusChristwhat proof do you have of god’s existence?

    • @MrSirGiuseppe
      @MrSirGiuseppe Před 8 měsíci

      ​@@rayzecoridk about that, depending on the work you do programmers are incredibly important. If it was code for some life support machine or something then that could cause issues if not written well etc.

  • @OddBawZ
    @OddBawZ Před 11 měsíci +176

    Mike at Stanceworks being the benchmark for crazy K-Series Swaps makes me happy!

    • @BoostedMike
      @BoostedMike Před 11 měsíci +1

      bawz when you going to do a car show im building a mitsubishi barbarian with a 500 bhp bmw diesel i want to race your civic, weird seeing you outside wt

    • @OddBawZ
      @OddBawZ Před 11 měsíci +10

      @@BoostedMike As long as you're racing me around a track in that, then I'm good with it! 😂

    • @itsjussjerry
      @itsjussjerry Před 11 měsíci +5

      I love Mike and his Ferrari, but The benchmark for K was there long before his build even came to fruition.

    • @BoostedMike
      @BoostedMike Před 11 měsíci

      @@OddBawZ I'm down for that it's on 33 Inch knobblys I'm building it like a trophy truck but got to haul ass

    • @notfunny3397
      @notfunny3397 Před 11 měsíci +1

      Can't wait for the type r with roof mounted mgs in war thunder

  • @connorbegley8464
    @connorbegley8464 Před 9 měsíci

    I don’t know much about engines, but you guys make it really easy for me to follow along and learn about how the engine works, so I appreciate that!

  • @alexmackenzie3544
    @alexmackenzie3544 Před 11 měsíci +8

    When doing torque turn, just use the bolt head. 360/6 is 60 degrees. If you just mark the socket at one of the 6 points, then mark that girdle at at the next point on the bolt. Just turn the bolt until the lines meet up.

  • @naerkode
    @naerkode Před 11 měsíci +509

    Looking forward to testing it on the $500 Civic😅. Could be interesting to see how the car does since it has new suspension and all?

    • @Leenre9
      @Leenre9 Před 11 měsíci +4

      Yeah, but that car will need some good wheels and tyres before that.

    • @naerkode
      @naerkode Před 11 měsíci +14

      @@Leenre9 👍 agreed. Won't be the first time 1 upgrade has led to more upgrades 😄

    • @hondagamer79
      @hondagamer79 Před 11 měsíci +1

      Yeah

    • @skylarradisic6849
      @skylarradisic6849 Před 11 měsíci +22

      I’m going to cry if that civic doesn’t become the next money pit

    • @stevenwood6939
      @stevenwood6939 Před 11 měsíci +7

      I still don’t believe they found an EG in the LA area for $500. I’m in Southern California and those things are very overpriced.

  • @cwadlow
    @cwadlow Před 11 měsíci +338

    I can’t describe why but Adam is one of my favorite donut personalities. Not always shown on camera but clearly knows a lot and works hard

    • @SansNeural
      @SansNeural Před 11 měsíci +6

      "clearly knows a lot" I'll give him that in general, but I'm a computer programmer and even I knew you can't evaluate the timing chain slack with no oil pressure. I was yelling at the screen ;)

    • @AB0BA_69
      @AB0BA_69 Před 11 měsíci +5

      Same, but for me it's Jeremiah. I think it's probably because he's one of the most level headed people on the team who's not a fan of YOLO-worksmanship and also because his first name is cool AF. (Yeah, bro, we've come full circle where Biblical names are back to being cool!)

    • @Peter-cx4ir
      @Peter-cx4ir Před 11 měsíci

      @@SansNeural shut it dork. Nobody cares what you do or what you think you knew.

    • @davidhollenshead4892
      @davidhollenshead4892 Před 11 měsíci

      @@SansNeural Same here, seeing the timing chain tensioner.
      Having worked on imports I also suspect that there is little margin for error on Honda engines, which seem to be rather fragile...

    • @guysumpthin2974
      @guysumpthin2974 Před 11 měsíci +2

      My vtec had a 9600 redline

  • @grubb910
    @grubb910 Před 11 měsíci +3

    Trowing this out there, I'm pretty sure you should have put the oil pan on last. You never know if you might drop something in there while working on it, and the front cover is designed to be installed before the oil pan. The way that the oil pan seals would work better against the bottom of the front cover, by doing the front cover first.

  • @hondaminium
    @hondaminium Před 7 měsíci

    In my book, these engine rebuilds that donut does will allways be the best videos donut can make

  • @lebronjames4705
    @lebronjames4705 Před 11 měsíci +199

    Jeremiah and Zach are the bread and butter of this channel. Entertaining as hell and they actually know what they’re talking about.

  • @anothermike4825
    @anothermike4825 Před 11 měsíci +260

    I love when y'all do this type of video. Tearing it down and rebuilding it better. Along with some charisma, you guys got "it!"

  • @claytron712
    @claytron712 Před 10 měsíci +10

    These teardown videos are so cool and so fun to watch

  • @HaltonLax44
    @HaltonLax44 Před 10 měsíci +1

    Honestly I feel the K20 should go into the $500 Civic. Make a man entirely new 3 or 4 part series about how a cheap car could be built into some crazy type of beast. Let’s see the full potential of that $500 Civic..

  • @skylerwaite
    @skylerwaite Před 11 měsíci +187

    The boys and girls at Donut have really outdone themselves with this one. From the topic itself, the wealth of knowledge and passion on display, to the incredible animations, and perhaps my favorite thing of all, the ad progress bar (thank you so much for keeping this alive, I'm sure it's not easy), I am truly blown away. Donut Media is hands down the best automotive enthusiast channel on CZcams, maybe even the best channel overall. Much love and appreciation.

    • @Solvablevoice70
      @Solvablevoice70 Před 11 měsíci

      You're excluding non binary people

    • @sk8xaq
      @sk8xaq Před 11 měsíci +1

      My thoughts, as well. Donut has been doing this a long time, and has a huge following, yet they continue to tangibly improve on their methods. It's exactly what you would expect from professionals, and yet it's amazing to behold.

  • @JamesCreamerIII
    @JamesCreamerIII Před 11 měsíci +184

    The closest thing we could get to the DC5 Type-R was the 05/06 Type-S. The K20Z1 was so close in performance to the K20A that with a few mods it’s indistinguishable around the race track.

    • @familialgameaholics7618
      @familialgameaholics7618 Před 11 měsíci +8

      Even had the same chassis reinforcements.

    • @alfredotovar8984
      @alfredotovar8984 Před 11 měsíci +13

      Ditto, the K20Z1 used cams, etc. from the JDM K20A and has only minor differences, mostly for emissions compliance

    • @KJ-dv6pf
      @KJ-dv6pf Před 11 měsíci +6

      Not to mention all the K24a2s I see everywhere so many wrecked TSX

    • @CthulDude
      @CthulDude Před 11 měsíci +3

      This is true because the z1 uses the type r cam profiles, but realize there is more support for tuning an a2 than the z1.

    • @jacks_Dc5
      @jacks_Dc5 Před 11 měsíci +5

      @@CthulDude there’s not more support for tuning in the a2 and the z1. There’s more support for tuning in the 02-04 rsx than 05-06. All you need is to swap the ECU and primary 02 sensor and your good.

  • @zone47
    @zone47 Před 9 měsíci +4

    I had a 216K mile K20A2 in my 02 RSX when I sold it. I bought it new and used it for a daily driver. Always running pure synth oil, it kept running better and better. It would even run strong on regular gas with no detonation.... good spark knock sensor I guess... I should have kept that car just for the engine but didn't know these could even come close to 1K hp.

  • @johnathansmith1003
    @johnathansmith1003 Před 10 měsíci +1

    So good to see you make videos about vehicles again!

  • @SSLOW96
    @SSLOW96 Před 11 měsíci +28

    Bro that Jetta didn't stand a chance on that highway pull. Straight GAPPLEBEES

    • @caseyjones5145
      @caseyjones5145 Před 11 měsíci +3

      Oh, im taking that 😂

    • @binskee677
      @binskee677 Před 11 měsíci

      But that wasn’t a K Series engine

    • @RealLeskot
      @RealLeskot Před 11 měsíci

      @@binskee677 Yes it was... it was k series swapped integra, they told it in the beggining.

  • @KoalazDank0420
    @KoalazDank0420 Před 11 měsíci +192

    I love it when you guys do Honda stuff

    • @aestheticswim3397
      @aestheticswim3397 Před 11 měsíci +3

      its a shame that honda has fallen so low in recent times my uncle had a 2017 civic si coupe and the engine blew on him within the first year of ownership those earth dreams engines are garbage

    • @turbone54
      @turbone54 Před 11 měsíci +10

      ​@@aestheticswim3397 he messed with it.

    • @chrisalarcon17
      @chrisalarcon17 Před 11 měsíci

      @@turbone54 right, no way it did normally

    • @aestheticswim3397
      @aestheticswim3397 Před 11 měsíci +1

      @@turbone54 no it was stock it was in and out of the shop since he got it that car gave us nothing but problems, face it old honda was way better than new

    • @niko4628
      @niko4628 Před 11 měsíci

      ​@@aestheticswim3397 some early Earthdream engines had issues with fuel leaking into and diluting the oil, which can easily lead to a trashed Si engine. Apparently it's been addressed.

  • @funpeoplearoundtheworld7027
    @funpeoplearoundtheworld7027 Před 8 měsíci

    What most people don't know about compression ratio is that it works on piston while going down also (intake)
    The piston being closer to the top of the cylinder creates a greater vacuum force while on the intake stroke. This is why big cams work better with high compression ratio - they need the momentum of fast moving air to wake up the cams.

  • @jcar12321
    @jcar12321 Před 10 měsíci +8

    You guys really make quality content. Within the last 2 years, I've really consumed quite a bit of cartube and Donut is easily one of my favorite outlets. I would love to maybe see a video formatted this way, but about why Dodge's Hemi Engine is so infamous.

  • @Patrick-bu5vy
    @Patrick-bu5vy Před 11 měsíci +85

    These two dudes are super knowledgeable and super entertaining - big ups to Pumphry for hiring them. Donut should start a race team and document the inevitable ups and downs. Porsche Cup is calling you boys.

  • @aqhr050
    @aqhr050 Před 11 měsíci +193

    It would be extremely cool and amazing if you guys could sometime build a 1000 HP engine over the course of a series or something 🙏. It's always been rather shush shush in terms of details beyond broad strokes (at least on CZcams in my experience).

    • @nycyabber7103
      @nycyabber7103 Před 11 měsíci +2

      or motoIQ* actually lol.

    • @piccalillipit9211
      @piccalillipit9211 Před 11 měsíci +2

      YEP - Id watch that

    • @DragonKnightX12
      @DragonKnightX12 Před 10 měsíci +1

      High vs Low S2K

    • @allurared9029
      @allurared9029 Před 9 měsíci +1

      If you want to make big power you have to read. Even lots of the SA design books will get you on the same page with the high performance guys

  • @docmorrell
    @docmorrell Před 20 dny

    I had a 2005 RSX Type-S. It wasn’t exactly the engine from this video, but that car was a blast to drive. It LOVED being near redline and never had any issues with it. I miss that car so much.

  • @nathanmallen
    @nathanmallen Před měsícem

    Major props to the graphic artist on this vid, super informative and clear to read.

  • @alcoyot
    @alcoyot Před 11 měsíci +206

    This is such an incredibly well produced informative video. I can hardly believe that content is being made this way by regular ppl, that is 1000x better than stuff being made in mainstream media by 100 billion $ corporations. Stuff like this is truly the way of the future for media.

    • @kooksgarage3301
      @kooksgarage3301 Před 11 měsíci +8

      I wanna agree with you but in the first 15 seconds he says the dumbest shit about a dc2 with a swapped k20 is the closest we can get to a DC5 ??? Dude we got k20 rsx in the states….. those are the closest thing to a dc5 not a swapped dc2 😂

    • @nicholaslopez4170
      @nicholaslopez4170 Před 9 měsíci

      ​@@RepentandbelieveinJesusChristrepent dis testieer

  • @Haris_2617
    @Haris_2617 Před 11 měsíci +22

    Can't wait for it to be in the EG hatch rippin around tracks.

    • @X88DRAGON
      @X88DRAGON Před 11 měsíci +4

      With the suspension and now the new engine that EG is gonna be a track monster

    • @leto1596
      @leto1596 Před 11 měsíci +1

      Now they just need some wheels lol

    • @kreczmer88
      @kreczmer88 Před 11 měsíci

      I feel like the stock transmission might struggle with this motor.

  • @silent_bob_
    @silent_bob_ Před 11 měsíci +2

    15:45 - I see a little green honda it would fit into nicely.

    • @taqveem
      @taqveem Před 10 měsíci

      Definitely! Honda's powertrain belongs in a Honda chassis! I know the body wasn't the best built, they would rust eventually, but that 3 door coupe series was the pin-up 😍

  • @dangitnicky
    @dangitnicky Před 11 měsíci +1

    The edits, animations and explanations are just beautiful...

  • @grtych
    @grtych Před 11 měsíci +31

    I enjoy the mix of tips, tricks, and struggles. Because we all know when it's said and done 80% was struggle.

  • @Captcarbide
    @Captcarbide Před 11 měsíci +50

    Loving the technical content guys! B2B and money pit are what got me to subscribe. Hoping to see more stuff like this on a regular basis

  • @sasquatchish
    @sasquatchish Před 8 měsíci +1

    The cardboard bolt sorter is freaking genius!

  • @kaidk751
    @kaidk751 Před 6 měsíci

    Amazing attention to detail. Love this channel ❤

  • @eaglebaize
    @eaglebaize Před 11 měsíci +40

    As a fan of your Money Pit series, I really enjoyed this video. :D I'd love to see this turn into a series that covers popular motors.

  • @Adam-nv9zo
    @Adam-nv9zo Před 11 měsíci +32

    I have couple cars and have had a few more with K20's and K24's I've been impressed with every single one of them. In my opinion they are one of the best 4 bangers ever made. Great video, guys. 👏 👏 👏

    • @izzy031096
      @izzy031096 Před 11 měsíci +5

      Kseries, 4age, and 3rz are the best 4bangers ever made. 2zz and 4g motors not far behind.

    • @ybitv5475
      @ybitv5475 Před 11 měsíci

      @@izzy031096 fastest civic is Bseries

    • @izzy031096
      @izzy031096 Před 11 měsíci

      @@ybitv5475 Na kseries makes more power. Bseries motors go hard though. So do dseries with boost

    • @jacobk.1291
      @jacobk.1291 Před 11 měsíci

      @@izzy031096nah d series rods are paper thin and will break, just do a b18 vtec

  • @ws8061
    @ws8061 Před 7 měsíci

    I love an engine with inline cylinder configuration, I've just always had great luck with them from the 22RE from Toyota to Ford's old 300 I6 I've never owned one that gave me issues.

  • @kamarijackson1918
    @kamarijackson1918 Před 8 měsíci

    Great video, just starting to learn about cars so someday I can build
    One myself 👏🏾👏🏾🤷🏾‍♂️

  • @curtisss
    @curtisss Před 11 měsíci +69

    I hope you guys realise you set yourself a high bar with this episode, really well edited and everything.

  • @beforemetherewas0441
    @beforemetherewas0441 Před 11 měsíci +89

    Would love too see a series where you guys build a car with 3 beginner mechanics and record the journey along the way!

  • @apexjuan494
    @apexjuan494 Před 10 měsíci

    I would install the crank and girdle plate on a flat table vs the engine stand. Love me some k20 power!

  • @briansantana3157
    @briansantana3157 Před 11 měsíci +62

    Algorithm boost comment lol

  • @samuelpollock8538
    @samuelpollock8538 Před 11 měsíci +45

    these are the best kind of donut videos. Entertaining and I feel like I learn something cool in the process. These two are my favorite hosts, always fun and seems like they are the most knowledgeable

  • @bebop306
    @bebop306 Před 11 měsíci +33

    Jeremiah seems hella pissed that Zach got “sick” lol

  • @Charlie-Oooooo
    @Charlie-Oooooo Před 11 měsíci

    Honda makes engines that run well but also that just look really tight and tasteful, with well designed placement and interconnectivity of all components.

  • @SKORPION0
    @SKORPION0 Před měsícem +1

    2:40 I think it's quite the opposite don't you think? Smaller is for rpm, bigger is for torque since it has more room for explosion and producing much more power.

  • @tyvanvleet
    @tyvanvleet Před 11 měsíci +10

    Not only do these videos show the unique way engines are made, but the fact that they don't dumb it down makes it so much better. Education and entertainment all in one. Keep up the great work guys 🤘🏼

  • @noforktouse
    @noforktouse Před 11 měsíci +5

    I love these rebuild videos, I learn so much and it's really well edited and produced with great personalities, flow, and educational but fun content.
    Watched a few videos way in the past but got more consistent when HiLow first came out and I've learned so much about building, fixing, and modding. Haven't done much myself yet for my car since I don't have that many tools or time to make it easy, but I've been working on my bikes with more confidence.

  • @sasuipunhu31
    @sasuipunhu31 Před 10 měsíci

    Dual VTEC....when low RPM you can set it for 280 degre cam. In high rpm you give itu 330 degree cam profile. So it become an afterburner piston engine since it install turbocharger. Just make sure your valve and piston are not melting.

  • @DMechRoo77
    @DMechRoo77 Před 9 měsíci

    Reminds me of TRUCKS from back in the day! Good stuff boys keep it up! 👍

  • @theprismaticsystem2833
    @theprismaticsystem2833 Před 11 měsíci +21

    Something I haven't heard you mention, the reason that engine is so used over other k series engines that are similar is the ECU for it was the original base for k tuner and those are cheap compared to the other variants with similar internals. Similar goes for the k24s from that year range being as used that only require two connectors swapped compared to back grading the ECU and harness like later engines in that series require for kpro. Other you did a good job explaining the basics for new car enthusiast.

    • @averyalexander2303
      @averyalexander2303 Před 5 měsíci

      I think the biggest reason people use the K20 over the K24 is because a stock ECU will run the K20 without complications. The K24A2 has drive by wire, so its ECU can't easily be used for swaps. That means a modified or standalone ECU and tune is required to do the swap right. But since the K24A2 can be found for around $500 vs $2K+ for a performance K20, a K24A2 swap still ends up being about the same price or cheaper and has much more torque.

  • @NekoWinters
    @NekoWinters Před 11 měsíci +5

    I'm not even a Honda boi but if my 86 goes I'm totally planning for the K swap cause I love the balance of a boxster motor but 500+hp in an 86 chassis would be INSANE

    • @yongling9825
      @yongling9825 Před 11 měsíci +1

      Replacing your spark plugs would be way easier too.

    • @jamesharlow4088
      @jamesharlow4088 Před 11 měsíci +2

      my FRS engine just went... saving up for a k-swap as of now! super excited to have a beautiful and light chassis that can actually have power

  • @hollywoodpeezy
    @hollywoodpeezy Před 10 měsíci

    I love these videos. They give off such a nostalgic vibe. Feels like watching the old school hot rod tv shows 😂

  • @OldOll1994
    @OldOll1994 Před 11 měsíci

    I just bought a dc5 last Saturday
    Firs time I've ever owned an integra.
    I was very chuffed to watch this :D

  • @nuttyDesignAndFab
    @nuttyDesignAndFab Před 11 měsíci +11

    the trick to the ring compressor is you want to seat it inside the block a little. If you get the cheapo ratcheting ones this works great cuz you can push them in axially and they sorta "spiral" out, giving you a nice edge to stick into the bore. the edge being in there helps transition the rings. DO NOT hammer on them or force them if they're snagging, you can bend or snap the rings.

  • @ppichos95
    @ppichos95 Před 11 měsíci +3

    Yessssss!!!! I’m here for all the Honda Boys that we fought our friends and family saying that the B and K series special K20A were one of the greatest engines ever created!!!! I been waiting for a Honda series on Donut and my Teenage self is going crazy right now!!!

  • @alex042687
    @alex042687 Před 8 měsíci

    K series is awesome. Been in production since at least 2001 so there are parts for days!

  • @ethanacton408
    @ethanacton408 Před 11 měsíci +18

    These engine rebuilds videos are great. Cant wait to see more

  • @thetjdman
    @thetjdman Před 11 měsíci +3

    My first car i ever bought was a 92 Integra 3 door with the B18 without VTEC. It wasn't the fastest thing but i had it set up like a go cart and it was probably the most fun I've had in a car.

  • @TheRedsuper1
    @TheRedsuper1 Před 8 měsíci

    I have JDM K20A sitting in my USDM 02 EP3. Even have the 6speed LSD too. ❤

  • @rockingrugger
    @rockingrugger Před 11 měsíci

    Epic video as always @Donut , one of your best!
    Just one thing I'm still not clear on - What's the specific thing that differentiates the K20A from the other K's?
    Is it a different kind of I-VTEC from the K20B & K20Z? Or is it just the magic combination of all the best bits of the rest?
    Lastly what's that sick DnB track at 14:10? About time you guys stateside caught up with us :P

  • @colton6428
    @colton6428 Před 11 měsíci +15

    Literally have been working on my Teg a lot lately and honestly thank you guys for making this video. Really helps me on my research!

  • @bobcantstandzyobitz9778
    @bobcantstandzyobitz9778 Před 11 měsíci +4

    My friend had a 94 civic hatch with the K20 in the early 2000s and damn it was fun. I think he had the rev limit at 9500 rpm. It sounded great.

  • @kraigkilborne2256
    @kraigkilborne2256 Před 11 měsíci

    THIS is the kind of content I love from Donut

  • @TheAwareHuman
    @TheAwareHuman Před 6 měsíci

    Hello Donut team. I love your channel and content. My suggestion would be to put the K20A motor into a Subaru BRZ, the one with the older body style! The car has amazing suspension that’s overdamped and handles great. It’s also compact and the engine bay would be proportionate to the K20A engine. What the lacks is power. And the boosted K20A would be the powertrain it needs and will turn the car into an absolute rocket 🚀. I’d also put 225 tires on the BRZ with some nice aftermarket wilwood racing brakes. Add couple of aero mods. For tuning the boost, I wouldn’t start at 1000bhp, perhaps 500 bhp is more than adequate to test out the vehicle on a track.
    Thank you for producing such great content for us car enthusiasts! Looking forward to the build!

  • @SlammedZero
    @SlammedZero Před 11 měsíci +8

    Love this. Make this a series. Would love to see you tear down the legendary 4G63T next!

  • @jakefromstatefarm145
    @jakefromstatefarm145 Před 11 měsíci +35

    I love waking up in the mornings to watch my Daily Dose of Donut.

  • @angelrocha6505
    @angelrocha6505 Před 11 měsíci

    Love this vid man good stuff!

  • @user-lb1xc8je7u
    @user-lb1xc8je7u Před 8 měsíci +1

    These teardown videos are so cool and so fun to watch. This doesn’t ruin the fact that Hector’s running 3 spoon engines….

  • @williamlau7247
    @williamlau7247 Před 11 měsíci +14

    I would love to see an episode on the rotary 13B and maybe bring back Aaron to really go in-depth into the engine.

  • @jdeee.mp3
    @jdeee.mp3 Před 11 měsíci +3

    Loooove these longer, technical mechanical videos!

  • @yveslegrand9826
    @yveslegrand9826 Před 8 měsíci

    Back in the early 80's Renault F1 engines were factory tested and adjusted after assembly. They were 1.5 liter turbo engines. The test and adjust run on the Dyno was limited to 15" max and the minimum acceptable power was...1500 HP.
    After 15" the engine was either "good" or ... scrapped...
    My point is, it's relatively easy to get very high hp from an engine. The only valuable aspect is how long it will last.

  • @CrazyA340Fan
    @CrazyA340Fan Před 5 dny

    I have a K24 in my honda element, All it needed was a cold air intake, Exhaust mod, And a tune to get to 350 HP from a stock 160

  • @Oc3anMaster
    @Oc3anMaster Před 11 měsíci +3

    I used to have a EJ6 fully built D16 SOHC turbo that I built with friends and man that thing was fun to drive, the dream was always to upgrade to a K swap motor, but this was like a decade and a half ago so it was kind of expensive then. To see the prices now, it makes me want to build another one again. I think I would easily go all-motor though in a lighter chassis, the all motor NA just slaps and feels so much more raw and visceral IMO.

  • @ethakis
    @ethakis Před 11 měsíci +4

    I'm very excited to see what comes next for this Honda. Though I am a little sad that we won't get to see you slap some turbos into the old engine.

  • @houstoner
    @houstoner Před 9 měsíci

    I had one of those K20s, with turbo in my CRX. God I miss that car.

  • @noahpoitras12
    @noahpoitras12 Před 11 měsíci

    stuff it in that 3rd gen prelude in the shop, i have a 3rd gen i’ve always dreamed of doing a crazy k series swap

  • @toast2558
    @toast2558 Před 11 měsíci +3

    You guys put the K20A in a Honda fit😁😁😁

  • @chefcc90
    @chefcc90 Před 11 měsíci +25

    I'm loving these engine builds. I like when you go through what is different from the run of the mill cars that aren't build for power. Thoughts on doing a rotary? Maybe a 13B REW?

  • @Pepsi-Cola69
    @Pepsi-Cola69 Před 9 měsíci +1

    Man they should make a video about the 4g63 i am very interested in that engine

  • @willwhite2449
    @willwhite2449 Před 9 měsíci +1

    Now the question I have is can you hook a automatic transmission to it! I have a v6 09 escape I thought I could get one of these engine and do same set up and put it in my escape.

  • @riproarin1000
    @riproarin1000 Před 11 měsíci +3

    I’m so glad you guys are doing build videos again! I might be wrong but felt like there was a bit of a dry spell there. Thank you guys for all you do!

    • @KingdomCre8tive
      @KingdomCre8tive Před 11 měsíci

      You know they don't read your comments right lol

  • @travisbrady3907
    @travisbrady3907 Před 11 měsíci +3

    I’m so happy you guys are doing Honda builds now

  • @KenzyK27
    @KenzyK27 Před 2 měsíci

    I love these kind of videos and want to learn more about cars and engines in general and want a personal project car in a couple years, where can i start to learn?

  • @Mike-zk4vg
    @Mike-zk4vg Před 6 měsíci

    These two transformed donut for me. I love them and they are the core of the show for me

  • @donovansmith2686
    @donovansmith2686 Před 11 měsíci +5

    Awesome guys! That engine in a MR2 Spyder hardtiop would be spicy, the sound in that cabin of 9000rpm alone would be insane... then there's the tight handling low center of gravity and fast acceleration from the light chassis. Great video, im sure whatever car that engine goes into will be incredible.

    • @izzy031096
      @izzy031096 Před 11 měsíci

      I think that’s the plan. It’s gotta be a k series or a 2zz.

    • @christopherscott3120
      @christopherscott3120 Před 11 měsíci

      A friend of mine has a built K-series in an MR2 Spyder. Super fun car. Another friend has something much weirder: a K-swapped DeLorean!

    • @donovansmith2686
      @donovansmith2686 Před 11 měsíci

      @@christopherscott3120 that DeLorean definitely hits more than 88mph now.... how about K20a in an Elise

  • @Aceblackjack101
    @Aceblackjack101 Před 11 měsíci +7

    You guys should do a VR6 tear down next, or an EA113. I feel like Jobe experience from ECS would come in handy.

    • @willo4k3s01
      @willo4k3s01 Před 11 měsíci

      EA113 All the way especially CDL S3 8p l, Golf 6R

  • @atomicsquirrelproductions6662
    @atomicsquirrelproductions6662 Před 9 měsíci +1

    I loved my D16zC motor....It didn't like just more than 8 lbs of boost though w rebuilt stock internals..upgraded the bearings rods and pistons a bit after the first slung the 4th rod bearing and second blow because of the 4th piston again because it ran hotter than the rest......I always wanted a B18C3 though as an upgrade but the motor I had was so cheap and easy to rebuild......2.5 inch exhaust....B&m short shifter....Fluidyne radiator, walboro 255 lph fuel pump....I forget the company but my ignition was all upgraded.....Fuel rail, injectors were also done, stock trans....But stage 1 clutch...did some other upgrades but I loved my civic.....Greddy turbo kit...Blow off valve was by....I forget but they told me it was for Subaru even though it was a universal kit....oh turbo XS...My next car was a 2004 sti w more money in the driveline than my house cost....Made over 40o hp at the wheels and 370 lbs of torque....26 lbs of boost all day long...custom built and tuned....Loved that thing...can't believe I sold that and my custom Honda CBR F4i....but was making 100k a year and had a lexus is350 awd and an suv and bought a house at 29 years old.....had 3 kids...went to great wold lodge and had tvs and xboxes in every room....all was great until I caught a coworker co manager of mine embezzled money and when I found out he had upper management lay me off because they were in on it...since then my life has been homeless basically...I pray karma takes them out to this day a few years later..

  • @joeg3950
    @joeg3950 Před 9 měsíci

    Cool. As an aging gearhead, I appreciate your content. Keep it up!

  • @killamods4
    @killamods4 Před 11 měsíci +9

    ya we need more of these there some of my fav. vids. ever sense they did it with the zs and subies closest were going to get to science garage miss that show so much. and def put it in the eg hatch as a new money pit car