I was trying to use my steam cleaner to clean my carpet. Then I realized no water was coming out. If you're having a problem with your Bissell ProHeat 2X you might want to watch this video.
I would recommend keeping the nozzles off and flush the lines well before putting them back on. Part of the problem is soap crystallizing in the system. My Bissell had one hose coming off the other. When I blocked the more powerful side with my finger, the other side cleared out a lot more. Always use the rinse option to clean this machine out after using it.
Thank you so much, my friend!! I have a dog with diarrhea and my Bissell wasn't throwing water. This solved my problem. Good video. Saved my carpets!!! ❤
After trying every other thing on CZcams, this simple needle thing worked! I had done it one time before but it needed it again and I thank you very much.
Having a lot of trouble taking the plastic pieces off the nozzles. Using a metal putty knife and can’t get it off the life for me, you make it look so easy haha
Thanks and did the trick for me, but had to clean the nozzles twice. Also flushed out the lines with hot water. I'll take another commenters advice of running a rinse only cycle when finished to clean out any residual soap.
Good video. I have the same problem and cleaned out my jets once a while ago. But they seem to be plugged up again. I'll use your video to help me remember how I did it the last time.
Took apart the entire machine before doing this step, unclogging solved the problem on all ports (both tips, and the clean shot, and the wand). To be fair I also found the heater lid was cracked so I JB welded that shut and it works like new.
I would recommend keeping the nozzles off and flush the lines well before putting them back on. Part of the problem is soap crystallizing in the system. My Bissell had one hose coming off the other. When I blocked the more powerful side with my finger, the other side cleared out a lot more.
Always use the rinse option to clean this machine out after using it.
Thank you so much, my friend!! I have a dog with diarrhea and my Bissell wasn't throwing water. This solved my problem. Good video. Saved my carpets!!! ❤
After trying every other thing on CZcams, this simple needle thing worked! I had done it one time before but it needed it again and I thank you very much.
THANK YOU!! Clear and concise, not a lot of talk and wasting time!!! Thanks again!!
Having a lot of trouble taking the plastic pieces off the nozzles. Using a metal putty knife and can’t get it off the life for me, you make it look so easy haha
Thank you. I'm going to save this video so that I can check my machine to see if it helps
Thanks and did the trick for me, but had to clean the nozzles twice. Also flushed out the lines with hot water. I'll take another commenters advice of running a rinse only cycle when finished to clean out any residual soap.
Epic solve! Straight to the point. Can't thank you enough!
It worked! I’ve tried everything but this is what finally made it spray! Now my machine works perfectly! Thank s a million!
Thanks for this vid ..I bought one of these off a lady on Facebook ...when I got it ..it barely sprayed water ...tried this fix and it worked ..
Thank you SO much! It worked and as a 61yr old female- if i can do it anyone can. ❤️ u tube!
You're a lifesaver, thank you sir! 😊
Thank you! Clear. Brief. Very helpful!
Thank you folks! Solved our problem!
This helped us so much!!! Thank you!!! 👏🏼
Thank you cleaning these made it work again
Awesome!!! That’s what I’m looking for , thank you so much 🙏🙏👏
Thank you so very much for this video!!! 😊
Good video. This may be my problem. Thanks.
Excellent video many thanks, question to be raised, cleaned the heater found clogged, pipes and nozzles were cleaned but still no flow ?
Good video. I have the same problem and cleaned out my jets once a while ago. But they seem to be plugged up again. I'll use your video to help me remember how I did it the last time.
Hi Glenn , I’m glade it helped, Take care Friend.
Thank you! It solved my problem!!
Hi from down under. Thank you. Good to know.
I'm sure lovin' on you right now neighbour. Thank you again!
Took apart the entire machine before doing this step, unclogging solved the problem on all ports (both tips, and the clean shot, and the wand). To be fair I also found the heater lid was cracked so I JB welded that shut and it works like new.
THANK YOU VERY MUCH
THANK YOU!
is there a specific kind of belt u used? mine melted so i’m not sure 😭
Nice I did it to mine
Thanks bro!
Your welcome brother
Thanks
I tried it’s but the water isn’t coming out the hose on either side
That was great. But mine isn't suctioning
Ok I'll show you how to clean the suction area.
Basil carpet cleaner?
where is belt location?
Did you ever find the belt on the unit
My white sprayer pieces wouldn't come off no matter how hard I tried 😥
Me too!
Flush the tubes before replacing the cleaner jets...
2:18 That’s what she said
Bro.....
@@robertgibson7739 😂😂😂
Poory engineered and cheap problematic crap from Bissell!
Sound is bad
Lifesaver
Thanks
Welcome, I'm glade it helped. Hey if you have something you need help with leave a comment and maybe I can help. Take care okay.