SUZUKI GSXR 1000 K1 FORK SEALS

#suzukik1 #suzukigsxr1000 #suzukigsxrservice
HOW TO REPLACE FORK SEALS SUZUKI GSXR 1000 K1 This is the easiest way to replace the fork seals at home on your suzuki gsxr 1000 k1
LINKS to tools:
www.ebay.co.uk/itm/2538320219...

[@smiller787]

First of all, excellent video, plan to make my own tools also, you’re a man after my own heart. Like to get my tools made before I tear into these and while I wait for seals to arrive. What’s the gap on the sprayer spanner to remove and hold the locking nut? Also the gap on the holder that is bolted to work bench that holds the cap while you push down on the compressor, and finally the measurement of the u bracket on the spring compressor, the pin to pin measurement. Ballpark measurements will do. Again thank you for video, very well done. I own 2 k2 1000s, one street, and one track, and fork seals need love. Love these bikes, it’s the closest thing to riding a video game in real life. Been hooked on hyper bikes for 45years, and i think its keeping me young, over here across the pond.

[@PXCBIKES]

Hello, Thank you for watching. I like to inspire people to do their own work..
Unfortunately, it was two years ago when I published this video, and I don't have the tools anymore..
The best way is to measure the components on the forks, but I just used pieces of scrap metal and parts I had lying around.
Hope this helps.

[@deanwyatt2897]

Great instruction. Thanks 😊

[@PXCBIKES]

Thank you for watching

[@BrianJacobsen-vn6is]

Made my own tools too.😊

[@PXCBIKES]

That's fantastic, mate proper engineer respect...

[@lavaughnwilliams1172]

Where do you get the tool from the seal compressor? I’m like you I can make my other tools myself.

[@PXCBIKES]

www.ebay.co.uk/itm/361534450517?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yvwl7HUSReq&sssrc=2349624&ssuid=n3oUZdeyTXi&var=&widget_ver=artemis&media=COPY

[@PXCBIKES]

Try this link for the tool I made mine myself but the tool it self is not expensive

[@83N]

The fork on the 600/750 k6/k7 works the same way right?

[@PXCBIKES]

I believe so yes

[@666alireza]

Was there a metal washer under the sealring?

[@PXCBIKES]

Yes there should be

[@reneortiz2602]

Great video… Where can i find that slide hammer?

[@PXCBIKES]

Fork seal driver ...you can get them on ebay just check the diameter of your forks the search ...fork seal driver tool on ebay

[@reneortiz2602]

Saw a bunch on amazon and its 39mm-50mm diameter

[@PXCBIKES]

🤙

[@BJ-fk9sq]

Hello, what tool did you use to measure the fork oil? And where do you measure it from bc I saw you placed it inside the fork a bit. Lastly, what fork oil did you use? I have k4 1000 so I think I just follow all of your video

[@PXCBIKES]

Hi I use 10w fork oil and I used a depth gauge ...you can buy a tool to measure fork oil but I just do it this way... and you measure it from the top of the fork station tube leave about a 8mm gap from the top to the oil ....

[@BJ-fk9sq]

@@PXCBIKES thank you a lot!

[@thomastraaps4731]

How many inches from the top?

[@PXCBIKES]

Hi sorry... I leave about 100mm

[@mavericklimon1849]

Cuánto lleva de aceite cada barra? Amigo

[@PXCBIKES]

Simplemente llene con aceite hasta 110 mm desde la parte superior Después de eliminar todo el aire 👍👍

[@mavericklimon1849]

Gracias

[@mladenpuzigaca381]

How much fork oil??

[@BrianJacobsen-vn6is]

So many mm with the spring out from the level of oil to the top of the threads on the fork tube. 4-5 inches Google it.