DIY Router Table Part 3 - Insert plate and T-Tracks | Template
Vložit
- čas přidán 11. 09. 2024
- #RouterTable #InsertPlate #TTracks
Fitting the Kreg Insert Plate into the table top and mounting the t-tracks for the mitre sleds, feather boards and end stops.
NEXT PART 4: • DIY Router Table Part ...
Router Table build series:
• Router Table
Table Saw Build Series:
• Table Saw
Products used in this project:
Small T-Track:
www.banggood.c...
Big T-Track:
www.banggood.c...
M6 T-Track nut:
www.banggood.c...
M8 T-Track nut:
www.banggood.c...
450mm Aluminum Alloy Rail Miter Bar Slider:
www.banggood.c...
Feather Board for Router Table Saws Miter Slot Track:
www.banggood.c...
Pocket hole drill jig:
goo.gl/4JaqHc
Start / Stop switches:
1: www.banggood.c...
2: www.banggood.c...
3: www.banggood.c...
4: www.banggood.c...
Dust Extraction Hoses 63-160 mm (2 - 6 inch):
www.banggood.c...
Dust Extraction Hoses 50-55 mm:
www.banggood.c...
Hose Clamps Different sizes:
1: www.banggood.c...
2: www.banggood.c...
90 Degree Stainless Steel Square Ruler:
www.banggood.c...
90 Degree Angle Corner Ruler:
www.banggood.c...
Want to give me a coffee?:
www.paypal.me/...
This videos website page:
willysgaragenor...
Community:
Website: goo.gl/9wZcs1
Instagram: goo.gl/1TnxKW
Facebook: goo.gl/H7L72E
Patreon: goo.gl/5pm5qs
Twitter: goo.gl/fzWWcA
Music & SFX:
www.epidemicso...
Definitely 1st prize for the best music on you CZcams, table is pretty good too.👍
Thanks man, like the misic too 👍👍
Subscribing for the music track you used alone. But also I'm installing a Kreg plate too. Thanks!
Hi and thanks for the subscribe :) some funky music can brighten the day 👍😎 Still very happy with my Kreg plate
Very nice work! Useful to see placement of T-Tracks. Thanks!
BTW... 80s movie studio called. Said they wanted their undercover cop music back.
Hehe, glad the video helped :)
More like Dirty Harry circa 1971.
killer tunes kept me engaged. Thinking about making something like this also. Thanks!
Hi and thanks for watching. I can recommend having a router table in the workshop 👍😄
This very helpful. Gives me more confidence to cut out for the actual plate. Still unsure. Very neat. Thank you.
Hi and thanks for watching, I'm glad the video gave you a bit more confidence :) Try it out on a test piece first, jist to see if your method is the way to go 👍
Finally ‼️ Brilliant all the way ❣️
Nice music
Nice work. Hello from USA.
Thanks and hello from Norway ;)
clever tips and tricks.....
Thanks 👍
It would be the Kreg´s insert plate product official Tour. Congrats my friend.
Thanks for watching my friend :)
Is this also good for 1/2 inch router??
Nice job
Thanks 👍
🎉🎉🎉
What considerations are there to where the insert plate should be positioned (here you have it closer to the back edge) and where the t-track should be?
I'm searching all over trying to find an explanation for why/where the router plate should sit in relation to the table edge, miter bar, etc. It seems like it's kind of random. I'd also like to know the reason for why the T-tracks that the fence ride in aren't longer? The longer they are, the more capacity the router has to do dados in a sheet good, etc. Maybe if it's that large of a piece it's best to use a hand router to do it on the top? Still searching for some answers...
@@l.w.c.2519 I searched as well but as you say it’s very anecdotal. The main issue with the single T Track position seems to be things like feather boards. It would be best to consider the typical locking distance of a featherboard and use that to figure out what distance you might need. As for the fence guides I’ve no idea either!
I couldn’t find any good info anywhere on the issue. I don’t know router tables enough to understand what are the limitations.
Perfect work high level
Thanks, I'm happy with it :)
how thick is the table top plywood? is it 18mm ply or thicker?
Hmm, is there a down and dirty measurement as to the distance of the T tracks from the router? Or is it a personal choice, I'm seeing so many different places of the T Tracks.
I know that table saws have a down and dirty measurement of 15cm from center saw blade. When it comes to router tables I think its personal pref. I can measure on my table and se what I used if you want?
@@WillysGarageNorway Thanks would appreciate that. Norway? Just saw that, winter over there too. Stay warm. Snow coming off the mountains today here in Colorado. Good day to hide out in the garage.
@@tedfritsch3340 I will give you the measurements. Winter and snow is quite normal here :) hehe. Normal temperature during the day is -5 degrees Celsius (23 Fahrenheit) 👍😀❄
@@WillysGarageNorway Up in the Mountains (love to Ski) Vail is usually in the "Teens" 13 F. to 20F. Here in the Front Range it can be in the 50's in January. Currently in conversations with "Eccobauer Construction over there on a possible home to build here in the U.S. Interesting engineering. Looking at their Norweigan-Style handcrafted log Cabin.
Sure seems like a lot of work.
I loved, simple excellent...!!! Would you share the links to buy the ruler and the pencil...?
Hi and thanks :)
What pencil and ruler do you mean?
@@WillysGarageNorway the straight yellow ruler and the green/black pencil you use almost at beginning
Where can I get this same plate set. Thanks, Tony
it's coming along really nicely. :)
Thanks man 😃
You should wear a mask when cutting MDF.
Willy How do I know where the T tracks track go? Is there a measurement from the router bit ?
I used the same measurements as on most table saws (center t-track from center saw blade) that is 15 cm or approx 6 inches 👍
And I think that works great, can even use some of the slide jigs on both machines :)
@@WillysGarageNorway great. Thanks
Se der ja,ble jo kjempe bra det der.Kreg og greier :D
Hehe, ja. Blir bra det der :) 👍 Er nesten ferdig med bordet i "virkeligheten", er litt treghet i CZcams videoproduksjonen 😂
Hvis du er interessert så kan du se fremgang i mer "real time" på Instagram eller Facebook sidene mine 👍
Way to complicated and not accurate routing 3:09, use nylon screws under the 4 corners of the plate for 100% leveling.
It worked for me :)