- 140
- 2 320 696
WillysGarageNorway
Norway
Registrace 5. 11. 2011
I make videos of different DIY projects. Everything from fixing cars to programming Arduino boards.
I have made my own DIY CNC machine that I enjoy making things on. I consider myself a maker (of all things) :)
If you have any business requests or want to send me something , please contact me on:
wgn@willysgaragenorway.no
Community:
www.willysgaragenorway.no
willysgaragenorway
willysgaragenorway
WillysGNorway
www.patreon.com/WillysGarageNorway
I have made my own DIY CNC machine that I enjoy making things on. I consider myself a maker (of all things) :)
If you have any business requests or want to send me something , please contact me on:
wgn@willysgaragenorway.no
Community:
www.willysgaragenorway.no
willysgaragenorway
willysgaragenorway
WillysGNorway
www.patreon.com/WillysGarageNorway
Setting up the CNC machine | New Workshop # 6
Making room in the CNC and noise room in the new workshop. This is to make rom for setting up my old diy CNC machine.
This is the CNC machine I built in my "First DIY CNC machine build" series on this channel. Before setting it up I needed to build a table for the machine and then figure out the placement of the electronics box, computer and monitor. There where also some faulty electronics and wires that had to be changed. Please enjoy the video :)
This is part 6 of the new workshop build, playlist here:
czcams.com/play/PLbU4V5X-fLzsKdCbt_F8H3iTZW6aDXzaI.html
CNC machine build playlist here:
czcams.com/play/PLbU4V5X-fLzsESZ52pG1Smf05pfN7k1Rc.html
This videos website:
willysgaragenorway.no/2023/03/13/setting-up-the-diy-cnc-machine/
Want to give me a coffee?:
🍹 www.paypal.me/WillysGarageNorway
🍹 www.buymeacoffee.com/willysgarage
Community:
Website: goo.gl/9wZcs1
Instagram: goo.gl/1TnxKW
Facebook: goo.gl/H7L72E
Patreon: goo.gl/5pm5qs
Twitter: goo.gl/fzWWcA
Music:
www.epidemicsound.com/
Index markers:
00:00 Introduction
00:20 Clearing out the room
00:50 Building the CNC table
01:19 Placing the old CNC machine
01:38 Explaining whats done
01:58 DIY CNC Machine details
02:52 How to get the CNC running again
03:11 Computer and monitor stand
03:51 Fixing the stepper motor drivers ans wiring
05:27 Turning on CNC for the first time
05:54 Testing the CNC for the first time
06:22 Connecting with UGS Platform
07:19 Fixing the Z-axis stepper motor controller
08:19 Finishing up the installation
08:46 Outroduction
#cnc #diycnc #cncmachine
This is the CNC machine I built in my "First DIY CNC machine build" series on this channel. Before setting it up I needed to build a table for the machine and then figure out the placement of the electronics box, computer and monitor. There where also some faulty electronics and wires that had to be changed. Please enjoy the video :)
This is part 6 of the new workshop build, playlist here:
czcams.com/play/PLbU4V5X-fLzsKdCbt_F8H3iTZW6aDXzaI.html
CNC machine build playlist here:
czcams.com/play/PLbU4V5X-fLzsESZ52pG1Smf05pfN7k1Rc.html
This videos website:
willysgaragenorway.no/2023/03/13/setting-up-the-diy-cnc-machine/
Want to give me a coffee?:
🍹 www.paypal.me/WillysGarageNorway
🍹 www.buymeacoffee.com/willysgarage
Community:
Website: goo.gl/9wZcs1
Instagram: goo.gl/1TnxKW
Facebook: goo.gl/H7L72E
Patreon: goo.gl/5pm5qs
Twitter: goo.gl/fzWWcA
Music:
www.epidemicsound.com/
Index markers:
00:00 Introduction
00:20 Clearing out the room
00:50 Building the CNC table
01:19 Placing the old CNC machine
01:38 Explaining whats done
01:58 DIY CNC Machine details
02:52 How to get the CNC running again
03:11 Computer and monitor stand
03:51 Fixing the stepper motor drivers ans wiring
05:27 Turning on CNC for the first time
05:54 Testing the CNC for the first time
06:22 Connecting with UGS Platform
07:19 Fixing the Z-axis stepper motor controller
08:19 Finishing up the installation
08:46 Outroduction
#cnc #diycnc #cncmachine
zhlédnutí: 1 918
Video
Metal Work Room | New Workshop #5
zhlédnutí 759Před rokem
This is part 5 of the new workshop build where I finish the metal work room in my workshop. To do this I weld a new workbench for the metal lathe, new trim around the windows, paint and placing stuff and tools. New Workshop Playlist: czcams.com/play/PLbU4V5X-fLzsKdCbt_F8H3iTZW6aDXzaI.html Finishing the workshop | New Workshop #4: czcams.com/video/143r-IeWkVw/video.html The Insulation Job | New ...
Finishing the workshop | Trim | 230v | New Workshop #4
zhlédnutí 728Před 2 lety
Finishing some details in the workshop like finishing trim, 230 volts main power system and LED lights :) NEXT PART 4: czcams.com/video/4qLdT2Sqv7s/video.html New Workshop Playlist: czcams.com/play/PLbU4V5X-fLzsKdCbt_F8H3iTZW6aDXzaI.html Want to give me a coffee?: 🍹 www.paypal.me/WillysGarageNorway 🍹 www.buymeacoffee.com/willysgarage Community: Website: goo.gl/9wZcs1 Instagram: goo.gl/1TnxKW Fa...
The Walls | Layout | New Workshop #3
zhlédnutí 774Před 2 lety
Explaining the layout and building the inside walls of the workshop! Insulating and mounting OSB plates (sheets). NEXT PART 4: czcams.com/video/143r-IeWkVw/video.html Want to give me a coffee?: 🍹 www.paypal.me/WillysGarageNorway 🍹 www.buymeacoffee.com/willysgarage Willys Garage Norway products link sheet (BETA-Version): 🔥 bit.ly/2PL9Nxm Community: Website: goo.gl/9wZcs1 Instagram: goo.gl/1TnxKW...
Ortur - Firmware Update | MacOS | Tutorial | Aufero Laser 2
zhlédnutí 2,3KPřed 2 lety
How you can download and install new firmware on the Ortur Aufero Laser 2. In the video I do it using a MAC computer but it would be the same doing it on a Windows computer. This procedure should work on most of Ortur´s laser machines, such as the Aufero Laser 1, Laser Master Engraver 2 Pro and Laser Master Engraver 2 🔥🔥 Product links 🔥🔥 AUFERO Laser 2: 👀 s.zbanx.com/r/Z85FLn1pGYHI AUFERO Laser...
Aufero Laser 2 Review | Firmware Update | Assembly
zhlédnutí 2,1KPřed 2 lety
Aufero Laser 2 Review | Firmware Update | Assembly
Insulated Door | Budget drill | Review | New Workshop #2
zhlédnutí 464Před 2 lety
Insulated Door | Budget drill | Review | New Workshop #2
Aufero Laser 1 Review | Ortur | Engraver
zhlédnutí 846Před 2 lety
Aufero Laser 1 Review | Ortur | Engraver
Detailed Assembly | Ortur Laser Master 2 Pro
zhlédnutí 1KPřed 2 lety
Detailed Assembly | Ortur Laser Master 2 Pro
Ortur Laser Master 2 Pro | Review | Engraver
zhlédnutí 2,1KPřed 3 lety
Ortur Laser Master 2 Pro | Review | Engraver
DIY Table Saw #6 - Assembling the saw | FUTURE plans
zhlédnutí 5KPřed 3 lety
DIY Table Saw #6 - Assembling the saw | FUTURE plans
DIY Table Saw #5 - To-Do list FIX | Slots | Rails | Mounted Bearings
zhlédnutí 5KPřed 3 lety
DIY Table Saw #5 - To-Do list FIX | Slots | Rails | Mounted Bearings
DIY Table Saw #4 - Cabinet AND Tilt Mechanism | Testing
zhlédnutí 26KPřed 3 lety
DIY Table Saw #4 - Cabinet AND Tilt Mechanism | Testing
DIY Table Saw #3 - Lift Mechanism v.2.0 | Redesign
zhlédnutí 9KPřed 3 lety
DIY Table Saw #3 - Lift Mechanism v.2.0 | Redesign
DIY Ceramics 3D Printer (part 5) - Electronics Cabinet | Box | Recycling
zhlédnutí 3,4KPřed 3 lety
DIY Ceramics 3D Printer (part 5) - Electronics Cabinet | Box | Recycling
DIY Ceramics 3D Printer (part 4) - Mounting the Cable Chains
zhlédnutí 4KPřed 3 lety
DIY Ceramics 3D Printer (part 4) - Mounting the Cable Chains
DIY Table Saw #2 - 1st Lift Mechanism | FAIL
zhlédnutí 11KPřed 3 lety
DIY Table Saw #2 - 1st Lift Mechanism | FAIL
DIY Table Saw #1 - Design | Lift Mechanism
zhlédnutí 26KPřed 3 lety
DIY Table Saw #1 - Design | Lift Mechanism
CNC Made Chisel Rack | Fusion 360 | Design
zhlédnutí 1,2KPřed 3 lety
CNC Made Chisel Rack | Fusion 360 | Design
CNC Made Clamp Rack | Fusion 360 | Design
zhlédnutí 1,2KPřed 3 lety
CNC Made Clamp Rack | Fusion 360 | Design
DIY Ceramics 3D Printer (part 3) - Building the Mechanics | CLAY | PROFILES | Linear DRIVE
zhlédnutí 7KPřed 3 lety
DIY Ceramics 3D Printer (part 3) - Building the Mechanics | CLAY | PROFILES | Linear DRIVE
Cartrige Filter for Dust Collector | Swapping | Upgrade | Canister
zhlédnutí 29KPřed 3 lety
Cartrige Filter for Dust Collector | Swapping | Upgrade | Canister
DIY Router Table Part 6 - Finishing up | Overview
zhlédnutí 4,4KPřed 3 lety
DIY Router Table Part 6 - Finishing up | Overview
DIY Router Table Part 5 - Fence with Dust Extraction
zhlédnutí 11KPřed 3 lety
DIY Router Table Part 5 - Fence with Dust Extraction
DIY Router Table Part 4 - Start Stop Switch | Dust Extraction | Router Instalment
zhlédnutí 10KPřed 3 lety
DIY Router Table Part 4 - Start Stop Switch | Dust Extraction | Router Instalment
DIY Router Table Part 3 - Insert plate and T-Tracks | Template
zhlédnutí 117KPřed 3 lety
DIY Router Table Part 3 - Insert plate and T-Tracks | Template
DIY Router Table Part 2 - Drawer Slides | Drawer Fronts
zhlédnutí 2,8KPřed 4 lety
DIY Router Table Part 2 - Drawer Slides | Drawer Fronts
your humor is great
I wounder for your presentation, u see i bought an old mechanical mini wood lathe machine but this one is much more latest and i have never seen in such away. Thanku
OHHHHHH🤣🤣🤣🤣 1000MM PR SEK CAN YOU CNC RUN 90.000 RMP 😅😅😅😅
Looks awesome!!!
willysgaragenorway.no/2018/03/27/creality-cr-10-mini-diy-spool-holder-upgrade-ball-bearings/
Where can I get the SPL download for this spool holder?
Hi, look on my website: willysgaragenorway.no/2018/03/27/creality-cr-10-mini-diy-spool-holder-upgrade-ball-bearings/
Thank you!!
Brother help me my cnc machine is going to program and suddenly stopped and showing grbl 1.1h for help.. What isse Peressist I have no idea
Sound like a wiring problem if it suddenly stopped
@@WillysGarageNorway ok thanks
@@WillysGarageNorway brother I'm not happy waste my money and time I'm so upset my machine is now Dustbin. My dream is not true 😕😕😕 I'm not lucky
Sorry to hear that, good luck
@@WillysGarageNorway my dream upset 😕😕
Nice music
Very elaborate! Or.....you could turn the bed upside down and attach the feet before the banjo, tailstock etc.😅
I've been trying to do this for several weeks, this is the best video on the subject, straightforward and effective, thank you very much
No problemo 😄 Old video but still relevant, glad it helped!
@@WillysGarageNorway 😊👍
Thank you
Ställ en serveringsbricka under. 8:55
Riktigt fin! Jag gillar när saker inte är mer komplicerade än dom behöver vara!
Riktigt fint router bord! Jag ska försöka bygga något liknande och fick massor av idéer från ditt bygge! Men först ska jag försöka förbättra klyvsågen. Det är en sån där billig sak med bord i tunnplåt. Jag blir galen på den, men med ett bord av 18mm formplywood ska det nog bli bra!
Høres bra ut, sjekk spillelista mi på bordsag bygget :) DIY Table Saw: czcams.com/play/PLbU4V5X-fLztcxpi_Frfq9CspAXTVVLyL.html
@@WillysGarageNorway Yes! Jag hittade precis den! 👍
@@J1I9M7M4Y Den motoren jeg bruker der kommer fra en klyvsåg med tunnplåt som bord. Den fungerer utmerket godt som bordsag motor 😄
@@WillysGarageNorway Ja, den jag har fungerar utmärkt rent mekaniskt, men det går inte att såga rakt med det bordet! 😂 Tror märket är Kellen (det heter nog Einhell nuförtiden).
Sure seems like a lot of work.
بارك الله لك
Please reply😢 Here is a problem to my CNC grbl with stepper motor that the response time, I send the command to stepper motor but it doesn't revolve it revolve when I reset or close the grbl and again open or linked up with arduino then the stepper motor runs with the previous code which I upload but it does not revolve at that time I am also change the response time to one What is the solution please tell
I know this is old, but did you jumper the steps on the CNC?
czcams.com/video/r1zi9vx3YP0/video.html
Thanks for that. I just can’t see if you jumped the micro steps under the drivers. Like did you jump it down to 1/2, 1/4, 1/8 or 1/6?
I also tried blowing dust😂
I bought mine a few months ago, in my opinion it is the best in its weight class. so many features that are only found on lathes that are twice the money.
Why don’t you create a tutorial ?
How mach this machine with assris❤❤
🎉🎉🎉
You’ll have skin from your scalp and face and dust that came on you from the outside on you and your cloths. Slip on a cover like the doctors use, the white jacket to cover your outside cloths instead of having to strip each time or even painting scrubs with the hood that only keeps your face and hands uncovered. I’m making a dust free area now and came for some ideas. Nice work! I like the curtain idea too.
Quale sorbo hai montato?
Ok that was very clear and I want to see how to build a model of tilting and lifting mechanism at the same time with a circular saw machine coz I see that, you explain very well then most of any other CZcamsrs on woodworking experiment 🤗👍
Excelente ideia parabéns!
Bro I can't connect ugs to aurduino board.. Give feedback. Please
You must upload the GRBL software to the Arduino
Almost forgot to ask: Does this still work if I use external dm542 drivers, not onboard A4988 drivers? I assume it does. Thanks
Thankyou! Most demos only show the X axis cloning, and I wasn't sure about the yellow pins for doing the Y. All clear now.
Здравствуйте , скажите пожалуйста как название программы для моделирования ?
Wow that's awesome 😢😢 now i understand thanks bro welcome but i found one issue that's openbuild "please wait machine idle joging" what is this problem and machine is not running please if u help for this feedback.. Please 👍👍👍
That was actually helpful thanks
Hello, i really need help. Is cr10s from 2018 12v or 24V? My hotend heats up really slowly and cant even heat more than 170C. Hotend 24v fans are really quiet. So i maybe think that half of the machine is 12v and another half 24v?Thanks!a
Great video - thanks. Which router did you use/would you recommend for the table?
If I had that piece of shit I would take it straight to the scrap yard
Thanks for making the video, its given me lots of good ideas but PLEASE, use a pusher when running wood through your circ bench saw.
lets say circle have 400 locations on it, each location identified as numeric location id, so how can we move to pointer to series of location given... for example starts from 0 to 10 then move to 34 -> 200 -> 90 -> 275 -> 345 and so on .. how to do these series moves one after other
You can do this with special stepper motors that sends position information back to the controller.. This is not possible with regular stepper motors
Big thank you!!!
delightful! amazing work!
The filter bag is great for golf balls !!!!!
Hello, how can'I change xy length in grbl?
SUBSCRIBED ❤
Is this also good for 1/2 inch router??
Oh hey! I’m doing a similar table saw conversion right now! I’m a couple of videos in and have a slightly different approach - but I think yours is better!
Bro what 3d printer will u use cose that is a beast of a extruder to sit on the axis
what diameter exactly is your separator ring that the filter fit onto?
I know this is outdated but its by far the most concise and simple video to follow for a complete newb on F360 cam. Thank you!
I bought this filter for my dust collector. It was shipped quickly, even during the holidays. I will be installing it very soon. Thank you for posting this video. Greatly appreciated!