EASY projects to engrave and sell FAST
Vložit
- čas přidán 22. 05. 2024
- You don't need any tools to get started with the xTool D1 Pro 20w laser. Head over to Hobby Lobby or Michaels to get some inspiration and pick up some ready to engrave projects.
Check out this other video on the 40w module: • 40w diode vs 40w Co2 l...
Thanks to MakeBlock for sending this xTool D1 Pro and MakerStock for the great materials to get me started with this machine.
Get the xTool D1 Pro here:
U.S.: shorturl.at/tJNV8 (Code: VW10)
U.K.: shorturl.at/jmnqD (Code: VW10)
Small Business Ideas with xTool D1 Pro: shorturl.at/dqCDZ
__________________
Buy materials for your laser (MakerStock): shorturl.at/fhiHI
- Use discount code "VOELTNER10" for 10% off at MakerStock
___________________
Amazon materials:
- Rolling pin: amzn.to/3PMlNvL
- Pizza peel: amzn.to/43oeRbc
- Pizza cutter: amzn.to/46IluI7
- Leatherette patches: amzn.to/3O8u381
- Honeycomb bed alternative (TwoTrees): amzn.to/44iUGga
- My other Amazon selections: www.amazon.com/shop/voeltnerw...
__________________
My equipment setup:
xTool D1 Pro 20w
RA2 Pro rotary
Air Assist
Check out my channel to see the other machines I use
Video Equipment Used:
Sony A7iii: amzn.to/37vxJOr
Sony 50mm 1.8 lens: amzn.to/433nPL9
Sony 28-70mm lens: amzn.to/459yzJJ
Konova Slider: amzn.to/3jkctxD
Camera tripod: amzn.to/3LU0a7E
Aputure 300x LED Light: amzn.to/3Kbbe25
Godox 140cm Top Octagon Grid Softbox: amzn.to/3FWkKUh
Timestamps:
00:00 xTool d1 Pro 20w
00:50 Projects 1 and 2
03:25 Projects 3 and 4
05:20 Projects 5 and 6
06:27 Projects 7-9
11:00 Making money with your laser
#xtool #laserengraver #laserengraving - Jak na to + styl
Upgrade your laser for safety and savings! Trade in any open diode machine for an enclosed xTool and get up to $500 off: bit.ly/3vHLipP
Check out the 40w module upgrade for the xTool and see how it compares to a 40w Co2 laser: czcams.com/video/B0PvDSwKWsY/video.html
it's realy nice that you have such a busineses us hoby loby in US because in Lithuania we don't
Very sorry to hear that. Stores like this are inspiring for projects.
To save material when you are setting up your rotary: Wrap your tumbler in foil then put painter's tape or masking tape around it. Engrave. It will not harm the tumbler and let you see if you have it set up the way you want. These are some great ideas!! Thank you!!
That's a great idea!
Thank you!
I'm not sure I understand what you're saying. Do you mean that the laser will engrave the aluminum foil instead of the tumbler?
I believe she was referring to testing before actually engraving so you don’t have to waste tumblers.
@@lindascraftsandthings915 as Voeltner Woodworking stated, for testing only. Once you ruin one or two tumblers because you had it set up wrong you look for other alternatives!!
Thanks for all the great resources, tips and honesty.
You bet! Thanks for watching and subscribing!
I have not even finished the video. I laughed, out loud, at the 16 second mark, when you said "hey" and pointed at the hay. 'nuff said. Dad humor appreciated. I'll finish watching now. lol
Haha. I can’t help it. Plenty of eye rolls around my house. 😂
A big unknown that I do great with us making electrical Control tag plates, push button legend plates Etc. Most companies want oil resistant custom tags and getting a dual color composite material so the letters are easily seen has been great.
That’s a great idea!
This is by far the greates video I've come across that is teaching me how to survive in this crazy economy. Thank you so much. I truly appreciate your time and help.
That’s great. Thanks for the feedback.
This is by far my FAVORITE video for this information! Dude! Great job!
Thank you. Appreciate that.
Always enjoy your videos!
Glad you like them! Thanks for watching!
So many great ideas! Love your channel
Thank you! Glad you enjoyed it.
Dollar store has a ton of Bass wood. Longer ray five ten watt is only three twenty nine and has one of the best detail lasers you can get for the price
I haven’t checked out dollar store. Thanks for that tip.
Great info. Thanks Matt! I'm getting a D1 as well. Looking forward to putting it to use!
Thanks Dave! It’s a good laser.
Great video Matt, you give lots of great information for everyone to add to their tool belts.
Thanks dude! We should team up on some laser content.
Great video, thank you
Thank you!
My first Laser is on the way thanks for this video lot's of great ideas
That's awesome! Congratulations. You're gonna love it.
I've done a lot of last minute cutting board engravings for wedding gifts. People will go by Ollie's (a clearance store) and get one of those 9" x 12" boards and I can put the name on it in about 20 minutes. It's definitely a quick turnover rate. I should go to Ollie's and buy up a bunch of them to have ready.
For sure! It’s a great way to make a couple of extra bucks with minimal effort. 👊🏼
Great video as always Matt.
Thanks so much, David! I appreciate you.
Congrats on this banger of a video!
Appreciate it dude!
Great video and I like your thought process. I already have a 10W laser and I'm always looking for new ideas. I just went to Makerstock and will be ordering some of the 1/8" MDF tomorrow. Looks like a good place to shop. You just earned your self a new subscriber. Now...on to some binging your channel tomorrow.
Hahaha. Awesome on all accounts. Thanks dude.
Great idea! Last July I got a slab of wood that came from a tree trunk, from hobby lobby, I made a ring holder for my Goddaughter and fiance/husband. I put their full names, then 2 strips of rectangles 1 under each name and then roto zipped those rectangles out for their rings to sit in. I am putting a hole or hanger on the back side so it can be hung up and a forever keepsake. I've never seen another one like it. The last name is Paris so the A in the name was the Eiffel tower. It turned out amazing! This is just for anyone wanting to personalize stuff for wedding, anniversary, etc.
That sounds like a great project!
Thank you for this, i will be buying mine in a week's time.
XTool has some really great machines. I recommend also checking out the S1 which is fully enclosed. I have a few videos on my channel about that machine. Glad it helped.
The S1 is pricy for me at this time, hopefully in the future I will be able to afford it 😀. Does it come with same workspace like the pro?
I’ll agree with all the comments on the helpful video brother! Love it!
Thanks Logan!
Great vid, thanks. A laser engraver is next on my list!
Thank you!
Great video!
Thanks
As a hygienist who is patiently waiting for my laser to arrive. I love your shirt!!
Haha. Designed it myself. 😬
Good video Matt. Definitely want a laser eventually.
Thanks Buzz. A great addition for the shop.
Great content
Thank you so much!!
Nice informative video. Thanks for sharing.
Thank you. Glad you enjoyed it.
Great video! Thank you very much!!! ❤
Thanks for watching!
Thank you
You're welcome!
such great ideas.
Thank you! Glad it helped.
Nice video, thank you. I am starting to play with it and hopefully can make some money at one point.
Thanks so much! So many possibilities. You'll do great.
I think you just sold me on this machine lol, thanks for teh great information!
It’s a great machine and can do tons of projects. You’ll love it.
Rock Rooster is in the house!! Keep up the great job!!!
Woohoo! Love you guys.
Subbed. Great vid 👍
Thank you so much
Very cool!!
Thanks dude!
Super informative
Thank you
Ikea has super cheap prices for high quality cutting boards. They have all kinds of shapes also!
That’s a great idea!
Thanks Matt and enjoyed the video for its idea's. But true story here. Long story short, moved and at 62 not looking to work framing houses anymore. Have lots of tools (every carpentry tool imaginable and recently bought a D1. Lots of time on my hands and have made a total of 10 stove top covers and 6 cutting boards. Love the work but do not know where to sell what I have made. Gave a bunch to family and friends.
Off to a great start! If your friends and family can post some photos on social media and tag you, I'm sure you'll start generating some customers by word of mouth. You can always try listing on Etsy or Facebook marketplace; with Etsy, the more you sell the more credibility you get with reviews. Best of luck to you!
Love this. Cause its exactly how I think but i dont know where to start selling!
A great place to start is by selling to friends and family on Facebook and directly. From there they will recommend you to their friends and your network will grow. This is by far the quickest way to get more projects done and gauge what types of products will do well when you get ready to sell on Etsy or your website. Thanks for watching and welcome to the channel.
@VoeltnerWoodworking Good tips! I have my items in a Consignment store and have set up the Etsy store but haven't started yet. Look forward to more of your content!
Thanks man! Im on the fence with getting one of these. Id like to use it on my Custom Made Cigar Box Guitars as well...
Now that sounds like an awesome idea!
Great Video brother. First time seeing your video. Subscribed now.
Thank you so much! Welcome to the channel. What type of content do you typically look for in a channel?
I have the 20w xtool and 100w c02 OMtech. Love them both. Nice video and yes these are money makers. The xtool paid for itself in 3 weeks.
Lots of great opportunities with both of them for sure. Thanks for watching!
Congrats. Thoughts on omtech? Thinking of getting the 24x36 80w.
@myhoneyshandmade1077 I love my OMTech. I have another video on it listed on my channel. I have the AF3555 and it’s been a fantastic machine. I’ve got a discount code for that OMTech if you want it, too.
returned the purchase? and what did you engrave?
@xisssd I’m not sure what you mean? Returned what?
Next time you do sheet stainless, try clamping it to a thick piece of aluminum. It helps when welding
Thanks for the tip!
Oh it would be cool for you to review the xtool m1!
Thank you! It looks like a great machine.
I never met a cheap woodcutting board that didn't fall apart the first time someone put it through the dishwasher, dropped it, or just used it regularly, though I do like Acacia as as Teak substitute
I make my cutting boards primarily from cherry, walnut, and maple. Can't beat a good hardwood for quality.
On the Tumblr when you say that all they’re doing is burning through the paint to get to the stainless steel underneath and some cases that is accurate because they’re bringing the stainless steel the light however, in some cases they are rich in the stainless steel, the same as you are without the paint Also, there are some sprays you can use when edging an area that will turn the ocean color as well. All at the same time what are you do give him permission that is excellent within this show me information is not completely accurate or was lacking the full information is necessary, keep up the good work as I do enjoy watching what you’re doing and how you’re doing it
Thank you
Great video! Thank you.
Would you end up in a darker engraving on metal if you run the same design twice?
Thanks. Yes, but each material is affected differently so it’s best to run tests.
This is great-thank you! Do you have any info on how the ventilation of the xTool works? It just..... goes everywhere in whatever space you're in? There's no body/housing to force it through a duct system of any kind?
They do make an enclosure for this system which will make it better, but they just announced a new laser that is fully enclosed. I’ve been testing it for a couple of months and it is awesome. I have a video coming out soon on it: www.xtool.com/products/xtool-s1-laser-cutter?ref=FCYiXVqZuxgXT&
Great video Matt, are you treating the stainless steel with cmark or anything? I have an xtool and I do not have much success engraving stainless. thank you for any input you may have.
Thanks so much. This was completely untreated. Run it at a very low speed, make sure the surface is free of oils, and you're good to go. You have a 20w?
This was interesting, and a nice breakdown on the machine itself. I am curious, is there a reason why you shimmed the rotatory attachment at 12:20 ? The bubble level shows the surface to be level on that metal, are the attachment wheels on an angle?
Thank you! The cup was slightly angled so I shimmed it level. Good eye!
@@VoeltnerWoodworking Nice trick, I haven't seen that one before. Though I guess it makes sense when you think about it and I just couldn't.
I commonly see people suggest 3D printing or laser-cutting rings to slide on. That way you create the same circumference on the tumbler top and bottom.
The problem with some projects that people intend to sell is that the Etsy market is flooded with too many, and at really low prices too. Best to try and sell local, or at least do something unique with the project.
Yeah, good photos/video on Etsy along with personalization is a must to be successful there. I like to sell locally and on my website for most profitability.
What are you using for your hold down pins? Those look perfect
They are from TwoTrees. I have a link to the honeycomb set in description. They work good as long as the metal doesn’t warp. Lol.
New subscriber, searching out makers channels, because I like to make and build stuff
Awesome! Welcome. What do you make?
Well, at the moment I’m working on a two-story farmhouse. But as far as making stuff goes, it could be anything. I put a video out of making a cornhole board not too long ago. I am heavily involved in the Homesteading community although I’m not really a true Homesteader. I am a maker at heart and and that’s where I want my channels focus to be. I have most of the woodworking equipment. Next step is to buy a drill press.
Sounds like you're a busy guy!
lol, you’ll barely have time to make CZcams videos 😂
Do you have a link for the magnets used to hold down your leather patch? Please and thank you!
They aren’t actually magnets. They are hold downs with the Two Trees honeycomb. I have a link in the description for the Two Trees honeycomb. Hope that helps. Thanks for watching.
When you do customized products on Etsy do you set specific parameters that customers can choose from when it comes customization or do you let them send you whatever they want it to look like?
Most customizations are done through my website. I find Etsy more difficult for things like that because there is a lot of back and forth for customization. Etsy has a metric for response time and I am not a huge fan of that for customization.
Can you share the settings for the pizza spatula thing? Was it a 20w diode?
Yes, this was a 20w diode from xTool. I'll have to look for the settings for this one, but best thing to do is get a second piece of similar material and run some material tests. I usually run material tests and keep them for future reference.
Is there some kind of adapter to etch glass? Specifically glencairn whisky glasses
The RA2 rotary works with all sorts of cylindrical objects including the oddly shaped glencairn glasses. Should work great. You’ll want to use a dark tempura paint or something as a marking agent to absorb the light.
@@VoeltnerWoodworking thanks for the quick reply.
Where can I find the cork Coasters viewed in videos at 1:24? Thanks.
Here you go: amzn.to/45E0wJw
Great video!
Ive watched a few of your videos now and I wanted to know if you designed your power and speed pattern or purchased from somewhere?
I use Lightburn which has a built in material test feature that you can use. It's very customizable and easy to do. Perhaps I should do a video on it?
@@VoeltnerWoodworkingyes please
@@deannahepner9355 sure thing!
very informative. where did you find the hold down buttons at
Thank you. I have links in the video description. These are made by TwoTrees.
thank you just starting out alot to learm 😀@@VoeltnerWoodworking
I have to ask, is this engraving the stainless or etching it? I have a project that will require real engraving with enough depth to add epoxy into it for a desired look. I had a local guy say he could engrave it and it was just etched.
It's just etching. It won't be deep enough to hold epoxy.
Hi thank you for the video. I just have 1query.. I can use leather and other material with this machine as well?
Yes, you can. If you click on the link in the description for the machine it will tell you the materials you can cut/engrave. Glad it was helpful.
Are you using the honeycomb and hold downs sold by XTool?
I had a 3rd party honeycomb that I was using. It’s from TwoTrees. I haven’t used the XTool honeycomb because I had this other one.
I just received my first ever laser so have much to learn! Thank you for the information! Is it rude to ask how you etched the edge of the cutting board with the xtool d1 pro? I have the 20w and cannot figure out how to make it tall enough to etch the edge. Thank you in advance.
Do you have the risers for it? You could always use 3 of the risers and shim up the remaining corner to make the machine level.
@@VoeltnerWoodworking I have the 8 extra riser pieces. Your way is genius! Thank you!!!!! And thank you for taking the time to respond. 🙂
Absolutely! I always respond to kind comments. :)
Matt, does mild steel etch as well as stainless?
This will only etch stainless steel effectively without marking spray. I just received the IR module for this and am looking to do some tests with it soon. Will make sure to post a video on that when I run some tests. Thanks for watching.
I have an xTool D1 20W pro. All videos I've watched stated you needed a medium on stainless to etch, ceramark, etc. How did you get the nice color? Can you please give you laser wattage and settings to give us a ballpark place to try on our own?
I ran the pizza cutter on the 20w laser at 100% power 7mm/s. It was a little too slow, so I would say around 10mm/s would be best. No marking spray required on stainless steel. If you’re wanting to do other metals you will require marking spray. Maybe I should make a dedicated video on this?
@@VoeltnerWoodworking video sounds good to me! Thx for the info and the videos.
How do you deal with that is created by the laser? I notice that you are cutting without any enclosure in the middle of your shop. My shop is a attached garage below my dining room so the smell would go right upstairs.
There is an enclosure you can buy with exhaust port for ventilation. I highly recommend that for any laser. I have a detached garage and since I do videos I leave mine open for now.
would you still go for the d1 pro to start or the s1, currently i dont have an outdoor place with power
If you can afford the S1 I would recommend that 100% mostly because of the safety and ease of use. The additional features like curved surfaces and conveyor attachments are great too.
@@VoeltnerWoodworking thanks again!
How do you get the engraving so dark and black
Increase power and lower speed to get darker engraving. It’s always good to do some samples for different materials to know which settings are best for each type of material. Hope that helps. 👍
What settings did you use?
A lot of them. 😂
What software do you use to create your designs
I use a combination of Adobe programs (Illustrator, Photoshop) and sometimes Canva. Often you can find good pre-made designs at sites like designbundles.net or something similar.
My wife and I want to start selling items on Etsy, what are some things that we should know about this laser machine? Is there a limit to how many things we could engrave? does it last long time without breaking down
I recommend checking out the xTool S1 laser for another option. It will last longer and is fully enclosed. It’s a great machine that will keep up with your needs. There’s a few videos on my channel on that machine.
Great video! Can you share the name of the font you used on the sign "grateful"?
Thank you. I can’t remember which one it was, but I get most of my fonts from DesignBundles.net. They have a great selection of fonts.
@@VoeltnerWoodworking Excelent, Thanks!! Really appreciate it!
Sure thing
I have always worked with co2 lasers, do you prefer the diode over a co2? The stainless engraving intrigues me, lol.
I like both for different reasons. The CO2 cuts much faster, but the diode is great for metals and small text.
@VoeltnerWoodworking thanks for replying, I appreciate your input.
New video coming out tomorrow on this. 👍🏼
Finding the xtool hard to price. Amazon Canada has it for about 1,900. Without knowing anything about the accessories or if I would need them just the accessories add up to around 2k? 4K is what I should expect to pay?
I have a link in the bio of the video that should work for Canada as well. If you’re looking for the 20w, there is a bundle that includes the rotary and attachments needed. That’s a great place to start. The 20w does plenty for most people and you can upgrade the module to 40w or IR module easily in the future if you need.
www.xtool.com/?ref=FCYiXVqZuxgXT&
Updated Canada xTool link: ca.xtool.com/products/xtool-s1-laser-cutter
What type of machine do you recommend buying
Check out this machine. Highly recommend. xTool S1 40w laser
czcams.com/video/u8oyTlRlMAQ/video.html
Do you have a fee chart on how to charge for stuff
I don't because it really depends on a lot of factors. The best thing to do is compare prices among places like Etsy, FB marketplace, etc. Based on your equipment and how long it takes you to complete something you can adjust from there. If I batch produce things I will generally have those products lower than one-of-a-kind type projects and those that take a long time to complete. If your machine is slower than industry standard, unfortunately you can't charge more because it takes you longer. If a set of coasters costs $3 in materials and you can design/engrave in 30 minutes versus another machine that takes 10 minutes, you shouldn't charge more. If the average for a custom set of coasters sells for $25 on Etsy then you should charge around that price.
What you lose in time, by something taking longer to complete, you pay for by learning. Think of it like paying to attend a class where you're the teacher. LOL! Next time you'll complete it a bit faster and learn better ways to do it.
I hope this helps!
Which Cnc router is behind you?
That’s the Stepcraft M.1000 CNC.
I get a lot from Hobby Lobby...especially the rotating sign. Can't share a picture here, though 😐
It’s such a great place for supplies. I spend way too much there and Michael’s. Lol.
Good video & information, but you really should promote safety and wear those special glasses while running any laser.
If you watch my videos you know I do promote safety and I do wear the glasses
Do you have a box for ventilation?
I don’t yet, but it’s on my list once I find a permanent spot.
Hi, I have been wanting to buy a laser engraver and cutter for plexiglass.
This would be a new journey for me. Is there a small machine you recommend for someone who has never done this before?
You’ll want to make sure it’s laser-friendly acrylic, and I would recommend a CO2 laser if you want to do clear acrylic. Both OMTech and XTool have CO2 lasers I would recommend. I have discount codes for both sites too. It depends on the size of the material you’d want to cut/etch on the machine I would recommend.
@@VoeltnerWoodworking thank you for the recommendations. I enjoy your videos. Very very helpful for people just starting. Trying this as a side hustle, so I did not understand the importance and function of each machine til watching these videos. Thank you , appreciate what you are doing and continue Blessings 🙏 I'm sure I will be bugging you soon 😁
Sure thing. No bother. Glad they were helpful.
Where can you get that
I have links for everything in the video description. Let me know if there’s something you’re looking for specifically.
You can't do stainless steel with a C02 can you? I was surprised to see you could do it with a diode. I thought you had to have a Fiber to do metal.
It works well on a diode. Either diode or fiber will work.
Can you tell me what machine you are using
Sure thing. There’s links in the description, but here it is: shorturl.at/tJNV8 (Code: VW10)
Can I cut stained glass for real glass windows or panels w lazer?
Unfortunately you won’t be able to cut glass. It can only etch the glass.
@@VoeltnerWoodworking I see some UT videos that mention cutting clear glass bit it gives no detail like thickness, power speed. Brand or type of lazer
Wanted more
@user-be5ng6il4y a 50w CO2 laser is capable of cutting glass. I haven’t done this as I have no need for that, but if you think it would make an interesting video let me know.
@@VoeltnerWoodworking imagine needing to make multiple windows for a building with similar images, with some center image changes but majority of fill is the same. Cutting by hand would be beyond difficult, could pay for a 40 watt machine on first job compared to a commercial contract shipped from out of state!
I am strongly considering getting a laser to cut and image plywood. Wonder how much more it would cost to upgrade to do limited side huddle glass cutting and etchings?
I tried cutting stained glass on the P2 co2 laser and referenced your question in the video. Give it a watch if you’re interested.
This is the CO2 laser to beat! My xTool P2 laser review
czcams.com/video/yR17uB5HiiM/video.html
Can you provide a Link to website that you purchase your Tumblers from?
If you're looking for one-offs, search for them at stores like Walmart, Hobby Lobby, etc., but if you're looking for bulk orders here's one site where you can get tumblers: browse.jdsindustries.com/ Hope this helps! Thanks for watching.
What store is that with all the raw wood products
It’s called Hobby Lobby. Michael’s also has a lot of these types of things if you don’t have a Hobby Lobby nearby.
@@VoeltnerWoodworking ah, you're so lucky you have a hobby lobby nearby! they are so much better than michael's.
I agree! I love HL!
What about the fumes?
If you’re working in an open space it’s not terrible, but they do make a cover for it. I didn’t use the cover for this video because it doesn’t make for great video content but would help eliminate fumes.
👏👏👏👍👍👍👍👍👍
Thank you
to bad the codes dont work for discount
The codes should work for XTool on their website. Which one are you using? Use code VW10. Lots of other people have used the code listed in description without issue. Let me know if it’s not working as expected.
Most leatherette material is not laser safe.
Definitely the reason the links provided are laser safe. 👍🏼
Please add a warning about types of leather you shouldn’t use in the laser because of safety. There are cured leathers that will give off poisonous fumes. Seems like a quick disclaimer would be a good idea.
Thanks for your concern. I’ve listed leather safe to use in the video description. 👍
Damn wtf people are douchey in the comments lol. Jealousy is loud.
Hahaha. Now that’s funny. Two thumbs up 👍🏼👍🏼
@VoeltnerWoodworking your video was exactly what you said it was. Good length. Lots of good information there. Love your replies putting everyone in their place lol. Thanks for the content will be watching you more
Thanks. I can’t help but be snarky sometimes. It’s a blessing and a curse. 😂
While I greatly appreciate 98% of the 'content' and conceptual ideas... there is one HUGE thing MISSING: TIME - how long does EACH OF THOSE engravings take? I understand there are variables of 'power' and 'speed' (of laser) - but how long did EACH OF THE engravings did you spend on EACH ITEM?? From the 'design' to the actual engraving? Those facts & points are 1000% MORE IMPORTANT for educated decisions. Also, what does a person need to consider for their SAFETY - eye & fingers - in particular.
I actually took the time per unit out of the final edit because it didn't flow well. Each of the engravings took between 8-15 minutes.
As far as safety, that is a topic of a future video actually; this video needed to stay on topic and is made as a general consideration of the various TYPES of projects people can make with this machine. These videos take a lot of time, so I like to break them up into topics instead of a comprehensive review because people generally come for one thing or another. Judging by retention across my videos, including it in this video would have been a fail. I have the safety video coming out next. Thanks for your thoughts, and I hope you'll take a look at the next video when it comes out. Cheers.
@@VoeltnerWoodworking - thank you... 15 minutes of 'production time' for JUST ENGRAVING is 4 an hour, 48 in a long day, 96 in 24 hours under perfect conditions.
If you're working 12-24 hours a day at the laser you may need a more powerful unit and probably not buying pieces to engrave from Hobby Lobby. LOL! I will typically start the machine and prep the next piece or work on something else around the shop while it's running, so you gotta be efficient. I have a 130w CO2 machine that I use for high volume projects, but that's not what this video was about.
@@VoeltnerWoodworking - well stated. So, this machine is a good hobby and starting machine, but if one starts to really 'get orders' and actually hopes to make money knocking out custom orders, they will need multiple more powerful machines. That makes sense. THANK YOU!
Agreed! It works for me because I'd only be using it to customize gifts for my real estate clients at closings! Now when the other realtors start calling for custom gifts... then I might need to upgrade. 😉
You should say, "I'm an XTool affiliate" in the first 30 seconds.
Thanks for your concern. It’s listed as a sponsored video so it’s not necessary. I do say it in the video where it fits naturally.
We don't all know realtors and most of these ideas would just be considered tat
The hustle doesn’t just come, you gotta put the work in. :)
Great energy but somewhat misleading. Coasters $30-$40 I call BS! I have so many products out on Etsy and almost no sales. Have a customer before buying supplies.
May be marketing. I sell mostly local because Etsy isn’t as great as word of mouth in my experience. Coasters and similar products sell great around Christmas.
There’s too many people trying to be an affiliate so that was kind of pointless to mention because none of us can do it because everybody else has done it already
That’s not entirely true. People have clicked on my link and used it the last few days and I’m new to affiliate with them.
I thought I'd come back and report that affiliate sales for this machine have done way over expectations. Never stop short of trying. You never know unless you try. This was my first xTool affiliate mention in a video and have had 23 orders in 45 days.
This is more of a pitch video for the xTool D1 pro, why didn't you just call the video that instead of 'Projects to engrave and sell fast'?
It shows the projects you can make with the D1 Pro, so yeah.