How To Cut HOLES In Tile! The Complete DIY Guide - Every Technique.
Vložit
- čas přidán 8. 07. 2024
- How to cut holes in tile.
In this video tutorial I’m going to deep dive into the various different techniques and tools required to cut various holes in tiles in a bathroom setting.
We will look at what might crop up in a bathroom for you to have to cut round.
If you are planning your own DIY bathroom tiling job then hopefully this video can help you get setup properly for bathroom tiling and the challenges this brings.
I hope this video really helps you on your tiling project.
Thanks,
Rob.
Diamond cone cutting bits bought here:
www.hhtiling.co.uk
#howto #cutholes #intile #howtocutholesintile - Jak na to + styl
You should always use safety glasses/goggles when using a grinder plus a mask for the fine dust, plus you should clamp the tile in your workbench vice to enable the use of both your hands when using the grinder. I've seen too many accidents to not pass on this advice. Cheers.
Ok, nerd.
2800 views???
This video should have a million views for the wealth if information contained within.
I'm starting to tile a shower shortly and can't thank you enough for this video.
Thank you so much! That really means a lot! 🙏🏻
Learnt a lot not easy 😊
One of the best tiling related videos on YT. Thank you so much!
Brilliant ! Thankyou for sharing your skill and knowledge. Priceless.
I had a situation where i had to make a hole with around 80mm diameter to the edge of the tile. There was under 1cm of tile left on the very edge of the hole. I didn't plan my tiling work around the holes really so ended up in that situation. Managed to cut it but damn was it challenging...
Amazing! Thank you
That cone is a game changer love that
Great video pal. Enjoyed everyone I've watched very informative thanks
Thanks
great!
Great video. Ive got a bathroom to tile and this information will help me out.😊😊
Also nippers produce less dust. So better for the lungs. Thanks for the video. Very clear
Great video!
Must admit that I was nervous the whole time about him not having eye protection.
Excellent. Do you use the hammer action on the hand drill at 23:30 please? It sounds like it. Many thanks for a speedy reply :)
Good
So really you could just like some pliers to break off those pieces after making those mini cuts. Nice.
Bedankt
Amazing! Thank you 🙏🏻
how much tile dusk allowable to be inhale when cutting tiles?
Wear a dust mask
Cut out side
Wondering if using cone on the backside will give you that under cut you're looking for.
Sounds like that could work. Thanks. 🙏🏻
Sounds like that could work. Thanks. 🙏🏻
Great video but I’d like to see same on porcelain tiles, as most good bathrooms are made with these tiles
Those *were* porcelain tiles.
The same advice applies to any other rotary equipment (drill) being used.
Thanks John, I do mention to make sure you follow all the PPE advice for the tools you’re using. Pretty obvious really! I’m making a demonstration video here so forgive me if I don’t wear my hazmat suit. Thanks for your comment.
Made a right meal out of that toilet waste hole tbh. Just go around the circumference with the grinder at an angle.
Old heads who do crappy work in the comments mad because they like to do fast and quick work that leads to sloppy outcomes and mistakes better to take your time make it look professional and neat brings more customers in the long run
28:18 What happened here? .. the tile doesnt fit 😂
So very longest time to cut a circle ..
Dangerous grinding any type of ceramic including porcelain without silica dust hazard reduction measures such as using a respirator, using wet process etc…
czcams.com/video/R_sC2wX9Uwc/video.html
Well if i have to work like you i am gone fire my self bad technique losing time i can cut 3 1/2 in hole with my grinder easy dont need the stupide cone blade like 300$ for this tool no way
Just showing people all different methods. No need to take it personally my friend.
If you already know how to do it then this video isn’t for you is it!!