Throttle Body | Porsche Boxster (987.1 and 987.2) (2005 - 2012)

Sdílet
Vložit
  • čas přidán 31. 07. 2024
  • Step by step guide on removing and installing the throttle body on the 2005 - 2012 Porsche Boxster (987.1, 987.2). We clean the AOS tubes, air intake, throttle body, and intake manifold. We show you where the vacuum lines are hiding and how to get to those.
    [Chapters]
    00:00 Introduction
    00:26 [1] Service Mode
    Guide • Service Mode | Access ...
    00:39 [2] Loosen Clamps on Air Intake Hose and Intake
    7mm socket amzn.to/3VglNpW
    01:05 [3] Remove AOS Plastic Hose
    02:10 [4] Remove Fixture Nut
    02:35 [5] Remove Intake Hoses
    02:59 [6] Disconnect Air Intake Hose
    Flathead Screwdrivers amzn.to/4byB2QZ
    03:46 [7] Disconnect Throttle Body Vacuum Line
    Bent Nose Pliers amzn.to/4aSmRFn
    Regular Pliers amzn.to/3QZKJPW
    05:28 [8] Disconnect Electrical Connector
    06:06 [9] Disconnect Intake Flap Vacuum Line
    06:34 [10] Clean AOS Tube
    MAF Cleaner amzn.to/3yBJobY
    Gloves amzn.to/451zeh2
    07:08 [11] Remove Throttle Body from Intake
    E Torx amzn.to/3R0xxKK
    07:35 [12] Cleaning Throttle Body
    Throttle Body Cleaner amzn.to/3UZX33T
    Gloves amzn.to/451zeh2
    Car Shop Towels amzn.to/3VhTSWT
    Brake Cleaner amzn.to/4bTJNon
    08:32 [13] Cleaning Intake
    MAF Cleaner amzn.to/3yBJobY
    09:02 Reinstallation
    Silicon Lubricant amzn.to/3wO2U4v
    16:45 Benefits
    18:28 Recommendation
    #987 #throttlebody #airintake
    [ BUSINESS / INQUIRIES ] / ruslanvideofilms
    ruslanvideofilms@gmail.com
    [ Cayenne | 957 ] • Porsche Cayenne | 957
    Guides www.planet-9.com/threads/guid...
    Diagnostics www.planet-9.com/threads/diag...
    [ Boxster | 987 ] • Porsche Boxster | 987.1
    Guides www.planet-9.com/threads/guid...
    Diagnostics www.planet-9.com/threads/diag...
    [ SEE MY CZcams ]
    • Tips | Cars • Tips | Home • vlogs
    • Porsche Cayenne | 957 • Porsche Boxster | 987.1
    [ MUSIC ] Karl Casey @ White Bat Audio / @whitebataudio
    DISCLAIMERS
    RuslanVideoFilms assumes no responsibility for damage to property or injury incurred to others or self as a result of any information contained in this video. Use this content and information at your own risk.
    RuslanVideoFilms is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
    Purchases made through links found in this video and description help support the channel and help us make more videos. Thank you for your support!
  • Auta a dopravní prostředky

Komentáře • 7

  • @RuslanVideoFilms
    @RuslanVideoFilms  Před 2 měsíci +2

    Feedback? Tips? Let us know in the comments below!:

  • @Hoster987
    @Hoster987 Před 2 měsíci +1

    Another great video...for some reason we had a horrible time putting the throttle body back in after a starter motor replacement. Struggled for a few hours and gave up but my buddy was able to put them back in less than 2 mins the next morning :-)

    • @RuslanVideoFilms
      @RuslanVideoFilms  Před 2 měsíci

      I had a hard time too! that darn air intake hose, lol

  • @oliwer_defiants
    @oliwer_defiants Před 2 měsíci

    Brilliant as always Ruslan. Thanks so much for such a great content for our Caymans and Boxsters!

    • @RuslanVideoFilms
      @RuslanVideoFilms  Před 2 měsíci +1

      Thank you so much for the kind words and support! And my pleasure!

  • @unicolor2024
    @unicolor2024 Před měsícem

    where does the vaccuum line from the tube flapper go to? I accidentally disconnected both the front and back flapper tubes and dont know where they go. theres two "changeover valves" which one goes where?

    • @RuslanVideoFilms
      @RuslanVideoFilms  Před měsícem

      The larger changeover valve vacuum lines go to thinner lines that should be under the respective valves. Unfortunately, the best solution I can recommend is guessing which smaller line the larger lines get connected to - if you mix them up it will idle poorly and you'll get a CEL.
      I took a look in the parts diagrams but the closest I got to finding them is the parts diagram for the changeover valves and vacuum lines - didn't find what they connect to - part 17 - www.porscheatlantaperimeterparts.com/showAssembly.aspx?ukey_assembly=474594&ukey_product=3813225#9
      I disconnected one of my flapper tubes too, on accident, but only one so it was easy to see which line it gets connected to czcams.com/video/gzuTL8Ymnrk/video.html