How To STOP a Car or Truck From SMOKING at STARTUP
Vložit
- čas přidán 13. 04. 2018
- Stop your car or truck from smoking on startup. If you are sick of watching that puff of smoke come out and feel a bit embarrassed when it happens then this is the video for you. Try it and see if you like the results.
ALERT!!
THROW OUT your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
***********************************************
If you would like to help us out.
www.paypal.me/YourSweetProjec...
***********************************************
TOOLS:
1st ingredient amzn.to/2H0zlxw
2nd ingredient amzn.to/2H262P6
3rd ingredient amzn.to/2GY4m9b
MixMizer amzn.to/2IXf5gN
Funnels amzn.to/2jO1IIk
Venom amzn.to/2B8kLBh
Some products are just not available for other countries we do apologize for that :(
Remember, by changing the formulation or mixture amounts may give you different results, the formulation we use has been used by us for years with great results on our end.
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. BEFORE ATTEMPTING OUR METHODS MAKE SURE YOU CHECK WITH YOUR MANUFACTURER. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this CZcams channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS. - Auta a dopravní prostředky
To all the viewers.....this worked on my 2011 Kia Sorento LX 3.5L 100%.. took about an extra 150 Miles of driving....but no startup smoke now...did exactly has he says.
Glad to hear!! Thank you so much for watching and sharing your results, we really appreciate it. Have a sweeeet rest of your week my friend. mad Mike & team
If your car has turbos your turbos can cause your car to smoke like that
Could I get the names of the items I need to stop smoke on start up on 2011 ford focus mk2 saloon diesel
Sir, I just want to thank you from the bottom of my heart. I know this will sound stupid, but your video was seen by my 81 year old grandmother.
My G-pa passed 7 years ago and she lives alone and still takes care of all of her own handy jobs. Anyhow she watched this video and did exactly as you instructed and took the mixture to the oil change place and had them dump it in at the oil change. It cured her 1970 mustang from smoking at start up. She was so proud of her self that she called my dad and told him the story. We had to find your site and this video to thank you for being an honest person and for changing peoples everyday lives. Thank you sir. I hope that God blessed you.
This right here makes all that we do worth it :) Thank you so much for sharing, we truly appreciate it. Blessings to you and your sweet grandmother. Have a great day my friend. mad Mike the hammer SPC
@@SweetProjectCars THE OLE LADY LUVS A REEL HOSS🇱🇷🇱🇷🇱🇷
Holy hell this actually works. My truck smoked liked a texas smokehouse on startup. I figured got to give it a shot. 100 miles to work. Not even. Took a 20 mile trip the night I changed it and in the morning smoke free. Not a single hint on 2 weeks since. Simply amazing.
Glad we could help bm12! Thank you for watching and sharing your fantastic results, we truly appreciate it, have a great week. mad Mike the hammer SPC
I was amazed!!!! Just like you said 100 miles. No more smoke on my 2001 f150 5.4L. Thank you so much for this SWEET concoction!!!!! Great videos and practical DIY tips.👍🏼👍🏼👍🏼
Glad it helped! Thank you for watching and sharing your results my friend, we really appreciate it, have a great week. mad Mike the hammer SPC
Since I discovered your site I have buffed my head lights with Mother’s, cleaned engine bay with armorall tire, fixed plastic screw holes on son’s hanging bumper cover with crazy glue and paper, 303’d my serpentine belt and wipers. I am going to do this as I have 2006 accord with 277k. It runs great but has the smoke on start up. I tell every body about your channel and how great all your fixes work. You are truly a blessing. You saved many tons of money with your ingenuity. Thanks for all you do. I’m Todd from Minnesota.
Todd Gilbertson from Minnesota welcome and we are very glad we can and have helped you, my friend :)
Did it work?
Todd Gilbertson you did it all, im.about yo, as a woman that will be something to encourage many other woman
I tried your formula and boy did it help me quit my smoking habit. Thanks, friend!
Bernie DIAPER SANDERS Lukso i can see it could help you to quit many things permanently L:)
Wow! Did this change yesterday, drove car a few hours this morning. It’s FIXED!!! Unbelievable! Thank you.
Nice work Doug! Glad we could help my friend! Thanks for watching and sharing your results, it's appreciated, hope you have a fantastic week. mad Mike
@@SweetProjectCars thank you!
How did I miss this one??? No end to the info on this fine channel, and the comment section is testimony to that. Very few trolls, or negative comments, its like a happy family.
True blue how you doing my friend not sure how you missed it but at least you got it we put out a new video every Tuesday and every Thursday just so you have a heads up on that, we launch them at 4 o’clock eastern time on those days that way everybody can be ready I guess, AnyWho we try to keep a real happy fun type atmosphere here we spend a lot of time going over all the comments to make sure that trolls are immediately deleted for life so that helps A lot have a great weekend my good friend
Yes!!!!!!! It works!!!!! This guy is the best! I got a 1986 bmw e30 with a rebuild engine, it’s all forged snd cammed, because of the crankshaft I installed it would smoke a lot after sitting for a couple days, after I put this mixture the smoke is all gone! Thanks a lot
Douglas very glad that we have the Bimmer out this is a great mixture for even engines that don’t smoke it keeps them clean and well protected have a great night my friend if you can share our channel anywhere and everywhere we truly appreciate that
Hey man, this video really works. Thank you for posting this, it saved me a lot of money.
Damn! You're really cranking out gold this week!
Thank you Adrian we truly appreciate that we are working hard to share all our tips before we retire
Tried this like 4 days ago drove like 25 miles right after having seen a hint of smoke since thanks champ 💯
Glad we could help! Thank you for watching and sharing your results, we really appreciate it, hope you have a great week my friend. mad Mike the hammer SPC
I'm here for stuff like this. Glad I subscribed
We are very glad you subscribed and we have many many many more videos coming on the tricks We have used here at our detail shop for over 40 years
It's 8/2021 now, I tried the mixture you made about a year ago and it helped reduce the puff of smoke in the morning to not much of a puff, then I tried another product, after an oil change about a year ago also, that's supposed to work and it had similar results. So, I just stopped using additives and have been living with the puff of smoke in the morning. But, I decided to try a totally different product for a totally different reason. This new product is a friction fighter called Motor Kote. I didn't try it to deal with the morning puff of smoke, I bought it to use to reduce engine wear overall. The day I added it to my oil, about a week ago, it stopped putting out that first start up puff of smoke. Figure that one out. Every day I start it up, so far, no or at least no noticable smoke. I hope it keeps working. Just passing that news on.
Thanks for watching and sharing, have a great day. mad Mike the hammer SPC
I have a 1996 Buick Riviera with 117,000 miles on it. the past few months it began to smoke bad. So I tried this exactly like it says. after 63 miles I noticed less smoke, after 141 miles no smoke at all... this combination really works and runs super smooth and more power. It really Works.. Thanks, I'm A Believer !!! just Turned 118,000 miles , No Problems !!
Sorry I meant 217,000 miles, now 218,000 miles Still runs great !!!
Thank you so much for sharing Charlie! We try to tell people that our methods do indeed work and you did that for us :) Have a fantastic day my friend. mad Mike the hammer SPC
Another SMOKIN' video from SPC!!!! Thank you so much guys for helping all of us poor, broke, DIY'ERS.....
I'm on the verge of buying a new truck for the first time in over 20 years. DO A SEVERAL VIDEO SERIES ON THINGS TO DO TO NEW CARS TO MAKE THEM LAST EVEN LONGER! {besides the one's already pertinent that you've created}----Thanks again!
Thank you very much we are working hard to share all the tricks we have used over the last 40 years that I’ve worked for us flawlessly thank you for being here with us Tyler
My Subaru Crosstrek 2018 has been doing this every time I start it.
Thank you for your video and for sharing knowledge.
🙏🏽
Our pleasure to help jorge! Thank you for watching and commenting, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC
Incredible, maximum respect for all the sweet tricks you share!
Jeff thank you very much that means a lot to us it is not easy doing these videos on top of working a regular job but we want to share all the secrets before we retire
I am planning to put AT205 resell because I have engine leaks , is that Ok with your mix? Or I have to wait until the leaks gone ? Thank you
You guys are my heroes , another great video and tip
Martin thank you so much my friend it’s always great to hear from you we try hard to share what has worked for us for many years
I trust you 100%. And as always thank you so much for your helpful videos
Thank you very much my friend for the great comments we appreciate it we try to do our best sharing techniques it work for us over the years.
Useing a good quality oil and changing oil on time will also clear up that smoke on startup.
Love that one!!. GREAT VIDEO
Trucker ManJr you are very welcome and thanks so much :)
Sweeeeeeeeeeeeeeeeeet Project Cars!👍 Cleaning the inside of your engine! 👍
Thank you Claude We love to keep everything clean LOL
Great Tips and a great video thanks for sharing.
Thank you Matt we appreciate that we try hard to share decent stuff
I love it! Learning too much. She says my head swells up twice the size after I watch your sweet helpful tidbits of knowledge. 🤓
Just one thing - when shopping for a car at night, my wife put the kaboash on one vehicle due to swirl marks she saw.
How do you remove swirl marks 🤬 from the finish that one would have to assume the detail department installed while detailing the car?
Looking forward to your professional opinion. 😐
Harry Pouncey we use this for swirl marks amzn.to/2IYHTW1 and this with it if really bad amzn.to/2JPr2pO hope this helps my friend :)
Always good always the good stuff my friend😆
Soul thank you very much we truly appreciate that more than you know
Interesting! Good to keep in mind for the future. 😁
Good deal and it’s awesome stuff to Run whether you have smoke or not it will keep your engine highly lubricated for a great protection
I can see how you’d figure out your other ‘concoctions’ but this must have taken forever to figure out. Anyway, I’ve learned so many super sweet tricks from you that I’m gonna try this one too. Thanks for all your wisdom! I hope that Bar’s leaks is available in Canada...
Thank you Angelo we’ve been at it for over 40 years and love to try all kinds of things much like a miniature science lab around here and as far as Canada we used to list all the products for Canada but no one was using them sorry about that. Have a great day my friend
Wisdom sir is telling of the future, this action he displayed on the video is knowledge...👍
Hello My friends, this video is for those of you that want to STOP that embarrassing puff of SMOKE when you start up your Car or truck. It will also help keep your motor in TIP-TOP clean condition so you never have that PUFF of Smoke :)
Sweet Project Cars Hi, I can simply watch your videos whole day. Can't get enough of your sweet tips and tricks. Do you have some kind of magic for stoping smoke under load? I drive Audi A4 2.0 TDI 2005. I know it could be a lot of things but hope dies last. Thanks!
Dejan Obradovic thank you very much and glad you like our work...i can say this-this method here will definitely help your under load smoke.
Thanks again, will definitely try. I wasn't sure cause my car is turbo diesel. Keep up with sweet magic of yours! ❤
Dejan Obradovic you are very welcome and you will love the results my friend :)
Sweet Project Cars Sorry to inform that it was dual mass flywheel that caused the problems but as soon i get the car from the service i will treat it with this mixture.
Wow nice trick thanks my friend once again you are awesome.
Thank you very much we try hard to share our secrets that it work for us we believe others need to know about them before we retire from the detailing business
Sir you are the best! Best video
Glad to help carla! Thank you so much for watching and sharing, hope you have a great week my friend. mad Mike the hammer SPC
My Mazda Protege5 does this at every cold crank. Will definitely go ahead and try this. Thanks a lot!!
Did it work?
thanks for all your research, much appreceated .
Kris Kirby you are very welcome my friend :) glad we could help :)
Awesome instructional video as always!
Always mind blowing to see these tricks of the trade from the best of the best!
The Sweet Project Cars Crew are the masters of DIY Car Care.
Why go anywhere else for information on car care when these guys have it all?
These guys are so amazing that they generously give us(the world) all of their tried and true, real world, easy to understand and follow information without asking anything in return.
I always get excited to see the notification that you posted a new video on how to keep my shit box cars running tip top and looking sweet!
Thank you for your time to post this video! Keep kicking butt guys, I know there's a lot of people that totally appreciate your efforts to show us all this extremely useful information!
Cheers to You All and Keep It Sweet!
Halsey thank you so much for that we always appreciate your great comments and support
I love these videos
rayfire50 thank you very much we truly appreciate that :) if you could do us a favor and share our channel czcams.com/users/SweetProjectCars any and everywhere that would really help us out :)
my bmw dose that
now 3 series i have changed the oil and spartplugs after 2 days done that. do i need to drive it faster to clean it or please need advice
BMW's are notorious for valve seals going out, you would think after all the years they have had this problem they would have fixed it by now. Run this mixture until your next oil change, then run the mixture again up to 3 times. Thanks for watching and asking Sebastian, hope this helps my friend. mad Mike the hammer SPC
I have a 2007 Nissan Murano thats been doing this for that pass 3k miles. It has 209k now. I've tried Lucas Engine Oil Stop leak, Restore Engine Restorer and Lubricant and Bar's Oil Seal. This is kinda my last hope before deciding to junk the car. Will keep you guys updated.
You have all to gain my friend, you may have to do it a couple times. Thanks for watching and sharing, have a great week and all the best on your project. mad Mike
might need a new PCV valve
Did it work!
Great tips awesome videos. What brand of oil do you guys stick with on oil changes?
Hello Mike we only use Full synthetic oils, We do not use dura blend oil’s. We are a big fan of mobile one full synthetic but in some cases all the top manufactures Full synthetic oil will work great
Hey SPC,
Would this also be good for cleaning/general wear and tear/preventive maintenance on an older vehicle engine or is it more for just the smoking exhaust problem.
Yes, it will keep your engine spotless, you should use it every 5,000ish miles. Thanks for watching and asking. Have a great evening. mad Mike the hammer SPC
I've got the same question.
That is a very cool fix... thanks
Thank you Ron we truly appreciate that my friend always a pleasure
I dont have this problem but I sure as hell love watching your handy tips and tricks of the trade.
Tuddie good deal my friend...we try to mix it up, we know everyone does not have the same issues...but we try to be a smorgasbord of car tips :)
Marvel Mystery oil loosened up a sticking valve on an old Oldsmobile for my co-workers Dad. After that he added a little every oil change. Ive got a Goldwing that smokes a little on startup, going to give this a try.
Andy Andy good deal and you will love the results :)
All the "GL" Goldwings I've ever owned smoke at start up. Even worse if ya use the side stand, try using the center stand an see if that helps? But the old Gl series goldies they all puff smoke when they come to life..
Will this work on my co-workers at work? Lol.. i luv these great tips and i look forward to your videos!
LOL not sure on the coworkers thing, and thank you for the great comments and support
another awesome video
Thank you Rick we truly appreciate that have a great day my friend
Thanks, worked great on f 150 21 year old
Awesome!! Glad we could help tim! Thank you for watching and sharing your results, have a fantastic day my friend. mad Mike the hammer SPC
There's a cure for everything you just gotta know how to experiment. I wish there were doctors like you!
You got that right my friend thank you very much we are here to help people that’s it nothing more I wish doctors are the same way as well
Thought that's why he was wearing the gloves?
tim jackson we are like car surgeons lol
Something that really works.. thanks for sharing.
Thank you Felix we truly appreciate that my friend glad to have you here with us
Felix - did you try this?Did it work?
Subbed and rang bell. Thanks for info
silicon oil cares for the rubber as well. I think it's the most overlooked oil additive
Thanks for watching and sharing, have a great day. mad Mike the hammer SPC
Awesome as usual, Thanks! Any suggestions on how to remove paint from thin aluminum travel trailer sides?
Thank you Todd for the question, we have never dealt with that but if it were me and I was doing it I would use A 5000 psi power washer in the areas that don’t come off you would then need to use Scotch-Brite I would not use a paint stripper because it could affect the aluminum it will be a timely process but you’ll get it. Thanks for asking
That was a Sweeeeet tip and trick you got there awesome video Thanks : )
Thank you very much we truly appreciate it
Thx it was worth a shot!
dana mckeever you are right, it does not hurt to try :)
dana did it work for you?
Good vid. Thanks
Bill thank you very much, Mike
Just ordered the ingredients for my 2013 Infinity JX35. I'll let you know how it works! Thanks for posting!
rudai123 you are very welcome my friend :)
rudai - did this work for you? Thanks.
@@DRIVEJA876 Nope :(
@@rudai123 Thanks Rudai... I didn't even attempt it...
Hey Sweet, do you have any videos/advice on how to clean a catylitic converter so you dont have to replace it?
Vaquero 357 we use this my friend amzn.to/2HMwqJ9 and do it up to 4 times a year on older cars hope this helps
Sweet tip
This really works, my 05 Silverado RCSB started smoking a month ago only at start, saw the vid last night and in the morning was buying everything to do it around 10am then drove like 65 miles and started after six hours parked and the smoke it’s gone!!! @sweetprojectcars Thank you guys, blessings and one more subscriber for life. AWESOME JOB 😊🙏🏼👊🏼.
Glad we could help Simon!! Welcome aboard! Thank you for watching and sharing your results, we really appreciate it, hope you have a great week. mad Mike the hammer SPC
I got a toyota tundra 2000 v8 4.7l and other day I turned it on hella smoke I called a mecanic he took a spark plugg out had more oil then normal switched all spark pluggs and changed oil still does it any help
So this is for your valve cover gaskets or something else. Also do you think it will work on a riding lawn mower? Thanks for the info
Michael Harless it will work on anything with rubber valve seals and it may work on valve cover gaskets if they are rubber. hope this help. :)
Need to do this for our farm EZ GO dump cart....basically golf cart with dump bed...only holds about 2.5 quarts, so it would appear the mix should be roughly a third of what you just did. Was considering the Lucas treatment but I like the looks of this........thanks......
George1mac it will work great for you and yes do 1/3 amount and you will be good to go, and thank you so much for those great comments it makes it all worth it for all the time and effort it takes to do these videos to help great people like yourself please share our channel if you get a chance thank you again
Just had valve cover gasket replaced, been about a week and I see that puff of smoke back. Not as much as it was, but its back (200 miles on it). What's up with that???
I would use this process in the video exactly as stated and you will most likely not have that issue anymore. Thank you for asking
Could this be used in a single cylinder 700cc ATV motor that holds 2.2 quarts of oil on an oil and filter change? Proportionately say 1/5 of 202 quarts?
Kim yes it can be used on your ATV you would just use The appropriate amount I would delete one-half quart of your regular oil and use this mixture in place of that half quart
Great tip, do you have any tips on removing carbon build up on the valves? Now that more engines are Direct Fuel Injection engines I'm sure there will be more and more cars with bad carbon buildup. Some Subaru enthusiasts are saying they are seeing bad carbon on newer Subies after 40K miles. Those guys are are doing walnut shell blasting to remove it, but there must be an easier way...
Stop buying GDI cars and send the message to the auto makers that we are not going to buy the crap they produce today and charge us up the ass for anymore. The GDI engines are plagued with carbon build up and there is no process for cleaning the carbon off the valves without removing the cylinder heads ,and reconditioning them at your expense$$$$$$$$$$$$$$$$$$$$$$$$$$$. Anyone who tells you they can clean them while running is lying to you so be prepared to spend big bucks every 20 to 40 thousand kilometers or 12 to 24 thousand miles to get your engine running smoothly again. CRAP , CRAP , CRAP I say.
worldsails2000 this the video we do for gas engines czcams.com/video/VS75-Z0MA9A/video.html if you have the valves out of your motor as it sounds by your comment we soak them in this for 3 days amzn.to/2HCPD0H then wire brush them.
Do you need to drive for about 100 miles all at once?
That seems like a great "additives package" you've come up with there. As you stated- it's best to change the oil first, but I would also recommend a thorough FLUSH and filter change as a first step; the gunk must be removed for any "seal restore" treatment to work effectively.
HUBBABUBBA DOOPYDOOP great tip my friend ...hey Hubba just wondering have you subscribed yet :)
Yes Sir! Subbed, AND clicked on bell, to always be notified of a new video from you. Why do you ask? Do I show up in your Subs list?
Thank you so much my friend glad you are subscribed we don’t check the list to see we just believe those who like at work will join us and we are glad you did.
Sweet car project i really need your help i am working on a 2003 dodge caravan the car shake and sometime it die while driving it. So i took it to auto zone itñ have check with a scanner. They found 3 code p0300, p0302, p0202. So i replace spark plugs the codes are gone but one p0202 . The car has blue smoke when idle and fuel coming out from exhaust
Thow Guandong this is what I came up with Failing or failed cylinder 2 fuel injectorFaulty ECMOpen or short in the wiring harness for the cylinder 2 injector circuitPoor or broken electrical connection so it is not good my friend pray it is just the fuel injector otherwise you will need to take it in for service as it could even be your ECM or our wiring harness.
I have a chevy 1500 year 2000 an my lifters make noise when i start it up. I've use marvel mystery oil it work for 2months. But now it not working as much. Do u have any suggestions. Not looking to replace the engine it only has 14700 miles on it
It sounds like your lifters are losing their prime when it sets the oil drains out of them being that they are hydraulic lifters this concoction in the video works really well to clean them up you should try it and see where it goes from there this mix does not take care of your problem you will need new lifters or you can add 2 quarts of Lucas oil treatment to it and of course you would minus out two of your regular quarts of oil that would be another thing I would personally try
Will this cut down on oil use too? I have to add close to 2 qts between changes.
Yes, this will help tremendously especially if you do it a couple of times my friend. Thanks for watching and asking, hope you have a great week. mad Mike & team
Just wondering who has done this? And dose it work?
I have a 2006 forester xt and just had the bottom end rebuilt. I'm thinking the valve seals are going bad. Buns oil at startup if it sits for more than 2 days
Kranken.Kaden if you look through the comments you will find those who have done this with great success.
I've got a benz that does this. It holds 8.5 quarts. Will the same quantity apply for an engine that holds this much oil?
Hello Paul you would actually double the amount of oil going in because you have almost twice the amount of oil that the normal cars would hold hope this helps
@@SweetProjectCars sorry, do you mean double the amount of this mixture ?
@@bigmedge
Yes. That's what he means.
Hello sir. Is this also works for the diesel engine car?
Great video will be doing this on my shop car this weekend! Quick question what can we do with the other side of the 2nd bottle of bars leak since it's not been used?
You can save that added in at the next oil change that’s what we do
Sweet Project Cars ok so my car takes 5qts...so the next oil change just add the normal 5qts then the leftover barsleak
hcoleman 25 yes that will be just fine :)
Thanks for advice
william jindra You may want to CONSIDER THIS czcams.com/video/Nl9JkIdnIG8/video.html it is easy and does just as good of a job.
Nice video I can't wait to try it out I have a V10 6.8 it's close to 7 qts. Does that mean I should double the recipe? Also maybe I miss heard it but is it okay if I do an oil change add this in with the new oil and leave it for 2 to 3000 miles?
That is correct you can double it and do it with a new oil change leave it in until your next oil change...thanks for asking my friend and for being a great Sub.
amazing, i do not know about it, i have ordered through amazon..l am still waiting for that item to arrive and try it .. like usual my # 1 video...thank you so much.....million thumbs up
Spozz thank you very much my friend as always we truly love you being here with us and always sharing great positivity especially in a sometimes very neg world..
Does the oil need to be changed after this is added and driven about 100 miles. Or does this need to be added to a new oil change and then changed at regular time?
David Waites do it on every normal oil change and you will be good :)
My 03 Camry blows that puff of smoke once a day in warm weather at first start up. I don’t see it in cold weather at startup. I use full synthetic 0 or 5-20 weight. I’m wondering if I try switching to conventional 10w-30 or 40 for 3,000 miles if it will stop seeping past the valve seals being that it’s not as thin as synthetic? I did buy the ingredients to make the oil mix you show in the video, but I was going to wait until I changed the oil to try it. What do you think about trying the switch to conventional oil first for 3,000 miles before trying your oil mix?
Here's why it does it when it's hot, it's because your oil is thinner. I'm going to believe that your vehicle has over 75,000 miles for that year which means the engine is more worn out, which means the components are looser allowing hot thinned out oil to escape out your exhaust. The reason it does not do it when it's cold is because the oil is thicker. My suggestion is to do this video for your oil change czcams.com/video/6-NwYpw0BdY/video.html and then do the video here using the exact same ingredients. Thanks for watching, have a great day my friend. mad Mike
@@SweetProjectCars About six months ago, my head gasket blew because two or three of the head bolts stripped out on their own. Apparently, that's a common problem over time with the 2002-2006 Camrys. So, I had the mechanic use thread inserts to replace all of the threads on the engine. The kit I bought is the Time Serts. They're said to be stronger than the original threads. So far so good and when they machined the heads they replaced the valve guide seals. So, no more smoking at all. The car runs great and will hopefully go another 200,000 miles. No rust either thank goodness.
My 2012 titan truck got a oil change and now I have white smoke at ever start up then clear after 3000 miles I check oil I was missing 4 quarts of oil and where I put oil in look gum up should I try it or should I changed the valve cover
4 quarts low?? If you had this done by someone else, I wouldn't go back there again! Give this a shot, you have all to gain and nothing to lose, if it doesn't take care of your issue, you know what you have to do. Thank you for the view and comment, have a great day my friend. mad Mike the hammer SPC
I got an 03 cummins that smokes due to.blow by worn out piston and oil rings but only smokes from one cylinder the rest just have blow.by. when engine is warmed up there is no smoke you think this will.help?
Definitely, give it a shot, you may have to do it a couple of times. Thank you for watching and asking David. Have a great day. mad Mike the hammer SPC
Just did this today on one of my vehicles I noticed started to smoke occasionally on startup. I'll replace the valve seals eventually, but figured I'd give this a test to see if it helps. I am wondering though, I also have a little bit of a rear main leak, have you noticed that this concoction helps with rear main seals since you've been using it?
Kyle Fergusson it will help all the seals in your motor that this concoction comes in contact with my friend :)
Will this work on a Chevy Diesel engine? 1989
It’s a 7.2 liter smokes a whole bunch when I start her up.
thank you sir
Celzo, give it a shot. We use this process on everything. Thanks for asking, have a great day. mad Mike the hammer SpC
Could anyone tell what to do with the another half leftover from the last bottle? I did it today and hopefully it helps. Thanks so much!
Dump it in, it's not going to hurt a thing and you will be glad you did. Thanks for watching and asking Kevin, have a great day. mad Mike the hammer SPC
Great tip! Will it work on a 1970 c10 with 200k? The only time it puffs any smoke at all is on start up. Its an old beater and I don't want to tear into it. Thanks for sharing this...
Hello Jay it will definitely help we have used it for years and it has never let us down thank you for the great question
I just did a timing job on my 5.4 3v F150 engine and now I have that puff of smoke at startup. I'm also burning a decent amount of oil. I was looking into PCV issues but sounds like I may have inadvertently moved a valve or more when I removed and replaced the roller followers during the timing job and some may not be seating properly or maybe valve seals got damaged during the timing job. Would you recommend trying this? Im currently using Mobil 1 5w-30 synthetic. My engine otherwise runs great, just burning through oil and puffs of smoke at startup. Appreciate your help!
For that situation I would use this first amzn.to/3D9vwSH believe it or not, it works. Thank you for watching and asking my friend, have a great day. mad Mike the hammer SPC
@@SweetProjectCars I appreciate it! I will give it a try. I do have some Bar's Leaks Oil Seal coming in the mail. What are your thoughts on that additive? Maybe try your suggestion first?
What does this product do? does it seal the internal leak? and how long that will be good for ? thank you
Oh my friend, do not analyze until you're paralyzed. This magic potion is just that, it's magic. It depends on how bad your valve seals are as to how long it will last, it could last 2 to 3 years. Thanks for watching and asking, have a great weekend. mad Mike & team
Would this work on a car with bad head gasket? Smoke only comes out of exhaust when first starting up.
It is definitely worth a try my friend that’s how we see things here you don’t know unless you try it
Hi well what about if the smoke is Coming out from the exhaust white but the smell of the smoke is a gas not smell oil, What do you advise me to do thank you very much
adam ruben sounds like your car is running rich..or if it smells sweet it is antifreeze...i would take it to a good repair shop and have them check it out.
Good tip thanks .
I like your choice in coffee
Yeah that’s good stuff I wish we could get the Italian blend we’re still looking LOL thank you very much
We live in Commiefornia and a friend introduced us to it in 1978 , but until recently it has always been difficult to find . They were having it shipped to them (she was a newspaper food critique )
Cbmech that's very cool and boy its great coffee :)
Up to what year cars do you recommend this i have an 08 and Wonder if this would work or mess it up
This works on any year, make or model vehicle. Thanks for watching, have a great day. mad Mike the hammer SPC
Thank YOU it works my truck stop smoking
Glad we could help!! Thank you for watching and sharing your results, we really appreciate it, hope you have a fantastic week. mad Mike & team
Hi, hello ,um, are you able to substitute the gun out for the sea foam?
We only recommend this amzn.to/2H262P6 because we know it works. Thanks for watching, have a great day. mad Mike the hammer SPC
What do you think of Bardahl NoSmoke+Stopleak? It claims to do exactly what your formula does. I’m hesitant to use additives. Your
Videos are always topknotch though!
William the only additives we use are What we use in our videos thank you very much for the kind words as well thanks Mike
Pleasantly surprised the mix a totally worked!! 2005 Chevy Tahoe Z71 w/ 5.3 L V8. However, I normally do a 6th qt of Lucas Oil Stabilizer to help the lifter tick. Well, a few weeks into the oil change, the lifter tick came back and almost seems louder now than before. Any help/direction is greatly appreciated!!
U find the problem? Also,got a 5.3 tahoe stutters to start n white smoke comes out
1 MAN ARMY Guzman maybe your valve stem covers
I know old thread...
I also have a 05 Suburban Z71 5.3 L V8 with the lifter tick and every startup smokes. Was told the oil pick up tube o-ring was bad, but what a pain it is going to be to change a$2 o-ring. Shop said $1000. I said no way!
Quick send that to Volkswagen, will save the 100000s they've spent on their dirty engines lol. Great tip never tried that one but have used greased lightening that seemed to work
Cornish that’s a great one on VW if they were to use this they might not of gotten in trouble on LOL thank you for your awesome comments
Great it works for VW's! 🤗
Thanks brother! My wife's car does this all the time.
Dome Arts it will definitely help her car and if it doesn't then you have much more serious problems my friend :)
If someone sees this please HELP me lol bought a Chevy blazer 2022 with 5 thousand miles on it. After a month that I bought it I saw black slight tint inside on of the exhaust pipes. I wiped it down to see if it will continue doing it and yes it does. And I’ve realize in start up it smokes a little, not a lot like in the video but there’s some smoke coming out when I turn it on and it’s 70 degrees today so it’s not because it’s cold lol. Any ideas?? Is there something wrong with this car ?
Can you make this and save it for future use or should you do before use?
Dan you sure can we keep a couple batches mixed up ready to go at all times it’s phenomenal it works great have a great weekend
Great and very informative video, keep them coming coz I am going to try them all. Thanks.
We truly appreciate the great comments and we will continue to work hard to do good videos that I’ve worked for us for the last 40 years
My truck let's out a big gust of white smoke only on start up every start up I live in FL so it's always hot n I can drive it n turn it of and then turn it right back on and smoke again... doesn't smoke while driving or idling after the intial gust
Any guesses ??
Did you do the video? If not, this video is perfect for you Ali! Thanks for watching, have a great day. mad Mike the hammer SPC
Is there anyway it would stop white smoke that smells like anit-freeze. It stops on start up but possible head gasket crack/cracks?
If it's coolant, this will not do anything for a head gasket, if you have a blown head gasket you are going to need this amzn.to/3uColQx we've had the best luck with it. Thank you for watching and asking Brad, hope you have a great week and all the best on your project. mad Mike the hammer SPC