05 CHEVY SILVERADO 1500 4x4 TRANSMISSION NOT SHIFTING INTO 3DR GEAR
Vložit
- čas přidán 4. 07. 2020
- If anyone knows anything that would help fix this issue without having to buy a used or new transmission that would be great. But if it comes down to it ill just buy a used one. Anyone local let me know if you got one for sale
- Auta a dopravní prostředky
You're a smart man. I think that's what drew me to your channel a couple of years ago. That, and your sparkling personality! (Oh, and buckle your seatbelt, 😆).
Wow, thank you!
i think this is an LGBT moment. i'll leave you two alone.....
Unfortunately with transmission it can be a multitude of things. Best bet is to do a thorough diagnostic on it and go from there. Most would recommend the fuse because it's cheapest route, and solenoids fairly cheap as well. Save the headache and completely diagnose it.
When I buy replacement fuses I always choose the ones with an led wired across in parallel with the fuse, that way when ones blows it lights up so you can locate it easily
Going from park to drive is your first shift. As you accelerate and it shifts again for the first time while moving forward, you're actually entering second gear. gotta count your first rolling shift and second gear.
Agree.
I bought a Remain transmission For 7 year warranty . I had 257000 miles before I replaced mines I'm still having this problem that you experience and that in mind is the 5.3 I took it the one transmission shop they couldn't figure it out they said it's not my transmission what's up top mission which I told him and I knew it wasn't because It was brand new. And my truck is throwing all types of transmission codes. So hopefully you find A good shop
Chevy Gmc notorious for trans sticking check your accelerator pedal position sensor
This is what has happened to my just installed remanufactured Trans. First the check engine for no reason and the the trans was only pulling in second.
Purchase a good scanner so you can see the solenoid active positions and trouble shoot it right. Get diagrams and check powers and Grounds. Don't guess, test!
I'm having the same problem but if I put it in tow haul it seems to shift fine
I have an 02 trailblazer that is having the same issue. Shifting into 2nd just fine then hard time shifting into 3rd if it does at all. Any advice?
How did you know you needed to change the 10A BTSI?
You didn’t do a thing to it and it started working ?
I had mine on the obd2 and it said the torque converter is slipping.
Mine is doing the same thinngggg 🙄 gm needs to do better I did everything on my damn truck and nothinnnnn😤 hopefully I can figure it out!!!
Mine wont go into highest gear. ?
Any fix?? Having the same issue :(((
You should have to tear down your transmission, change the 3/4 clutch pack with the pistons, have to pressure test the passage with air for the input drum for air leakage between the drum and shaft
man...
What about to change the whole transmission, Jamel,>?
Change of transmission strainer and new transmission fluid and you should be good to go
Your truck intermediate shaft ion your steering column is worn and replacing. that’s what you hear that clunking in the your steering. Common on those years
thanks for the info man!
The transmission is in limp mode check for power at the plug should be a light pink wire if you have power at the plug than its going to be in the transmission pan ethier bad harness or 1-2 shift solenoids
L18blindboy1997 Thanks for the info but I’m not sure if that’s it either. I’m going to make an update video this weekend to let you guys know what’s going on with the truck. She mostly only shifts bad when and after pulling a trailer with a lawnmower.
I wish I had you to help
It happened to me the same way with the shifts i have a 2004 silverado all i did to it was change 1 and 2 solenoids and also clean the transmission pan and gasket my truck runs good and shifts really good now
@@SACRAMENTO_916 Well you got lucky. Mine is doing same changed A & B solenoids,filter,gasket,fluid and still hving same issue with shifting
limp mode doesnt rev that high
I have a reman transmission in now. And still having the same shift problems. I replaced speed, troque, and shift solenoids. Not to mention the Tccm. Transfercase control module. Still hasn't fixed the problem. Im at a loss now too.
Does a shift to first and second find but when it hits third or fourth it feels like it goes into neutral on the RPMs go up high if you replace everything else and you still having shifting issues it is more likely your 3-4 clutch pack that would need to be replaced inside the transmission
If you put a rebuilt tyranny in doesn't that replace the existing 3-4 clutch pack?
Replace all 4 shift solenoids! Drop the pan!
Transmission shift solenoids my car was doing that too
Mine does the very same thing! When it's cold, I don't have a problem, until it warms up good. (COIL?)
Do you mean ignition coils?
This is a fluid viscosity problem. Your fluid is probably very old and when it thins-out at higher temps, it slips past worn seals/parts so that hydraulic pressure is lost, and therefore gears do not shift normally, or it gets stuck in between gears (neutral). Try Lucas Transmission Fix & Stop Leak.
What was it?
Mine acted the exact same way. It was the throttle positioning sensor (TPS). I bet it idles high after driving a bit and you put it in park. I was even throwing an evap code. 50 dollar part and two screws
Dam I keep getting the evap code even after I deleted the code it would come back like a week later. Thanks for the help man! I’ll make a video and see if this works
@@tylermischief22 yeah mine felt like I wasnt shifting into 3rd. I had to really stomp on it to get it to move around 40 mph and it would rev real hard. I had a transmission guy check codes with a more advanced code reader and he zeroed in on the TPS. i its confused about the throttle position it wont want to upshift. t's a bit tricky to get to but I think A1 Auto has a video on how to replace it easy.
@@tylermischief22 u have a evap canister behind ur gas tank it has plastic tubing that goes to the charcoal canister. Get some 3/4 heater hose and hose clamps replace it . Had same issues with my 06 Silverado . Also another thing I replaced was the sensor on top of the motor that ur fuel line goes into. It was a $25 part . After replacing it my evap codes have not been back on.
Check your throttle position sensor. Not just the gas pedal but the one on the throttle body. The plug on the throttle body is bad for going bad. The yellow and brown wires break easy get replace ment pig tail from o'reilly's it's there 8 wire plug.
Try to change shift solenoids.
I changed all the fuses and sensors but still won't shift into reverse and moves forward when in neutral
Check ball stuck in separator plate
Maybe it can be not the speed sensor but the harness that runs from the speed sensor to the transmission check your harnesses people it might save you a shiet ton
Did you ever figure this out? I have an issue similar to this, Mines on a 11 Yukon Denali, just got a jasper reman transmission put in bc the old one went out and we have about 600 miles on it and it hard downshifted into first or second and revved out, then when we got on the gas it would just rev out and not shift up past 2nd, later trying to limp it to a shop I figured out of I let it coast about the time it was supposed to shift to 3rd it would go in and drive and shift great until I came to a stop again, fluid looks good and was still full and there was no “burnt” smell, we have a 3yr/ 100k warranty but the installer basically is trying to pass the hat, said it’s not the transmission bc it’s a jasper, so we are waiting to see what this other trans shop says, just trying to do some research of my own to see if I can figure out the cause
That is exactly my same problem. I didnt know how to explain it. Did you ever find the problem?
Takes off fine in first, shifts to second perfect but won’t shift to third unless you get the rpm’s up nd let off gas nd put back on, won’t shift into overdrive
mine shifts into 2nd i think then after 60 it forces itself to go went to a mechanic said he need a new transmission 😕 someone help not tryna drop a bag
Try a new tps sensor
Doubt it's the trans. Did you fix it?
It always starts in 1st gear and it shifts into 2nd and so on. Try changing the fluid and filter if that doesn't fix it then change the shift solenoids
i have same or similar issue with shifting in 4l60e. I can get it to shift by applying more or less throttle to about 3300 rpm which i believe is what happened when yours suddenly worked.. no downshifts though i have to manually downshift back to 1st and adjust throttle at each shift to get it to grab. no overdrive. could VVT solenoid cause this?
Try disconnecting and connecting your idle sensor on the throttle body and erase the code that I’ll pop up and you’re idle should be hire just turn off and on your motor until idle drops back to normal and drive it to see if that fixed it because my dads truck had some what similar problem downshifting tho and that fixed it
I’m having the same issue. I was able to do that a couple times. Haven’t been able to for. Couple months now.
What was the issue. Mines doing the same and I can't find any awnsers
Probably bad solenoid
Had the same problem was about to pull the transmission then saw a video telling that the TPS (throttle position sensor) might be bad. $15 part and it shifts!
did your truck not want to go over 40 mph??
@@twistedtuned4273I just got my new motor 5.3 in with 82k miles and a rebuilt transmission 4L60E also got new Acdelco 02 sensors and new catalytic converter’s and new fuel pump the whole engine has everything new except pistons upgraded all new parts and all new sensors and yet when I drove my truck it’s a 2006 Silverado 2wd it still didn’t want to go past 35 up no codes or nothing
@@anthonymorales3120something was obvious done wrong. Start completely over
Did you get any check engine codes before changing the TPS sensor? I have no codes but got this same symptoms
My 02 (4l80 swapped) truck is doing this randomly
Trans was fully rebuilt and working swapped the motor out an now I have no 3rd/4th
Plugged in HP tuners
An it says I’m going through all gears
But it doesn’t physically shift
I tried to “command” shift through HP tuners still no response
Did a ohms test at the plug I have 12v(e) 20.1ohms on (a) an 418 ohms on (b)
Guessing there’s a short in the internal harness??
No codes tho
Replaced tps an speed sensor
Checked every fuse on the truck (none blown)
So frustrating
I have 01, took mine to a shop and they said my transmission cooler lines were leaking and that I didn't have a bad transmission. It was a expensive fix, considering, I could've done it myself for way less, if I would've known. But still having transmission issues. Trouble in shifting from second to third. Like wtf.
Did you ever figured out your problem? Im having the exact same problem.
Short answer no after my comment here it got rebuilt again an 3rd/4th feel like neutral but from what I found out is something in the valve body is damaged and/or forward drum
I actually just ordered a stage 3 jakes performance trans done playing with it
Tcm maybe
So i have a 2005 5.3 l silverado an nutrual acts like drive and i dint have a reverse do you know why?
Shift linkage needs adjusted maybe
@@tylerparker3024 yep easy fix
Not exactly the same but on my truck, 2000 Chevy 2500, 6.0, the PRND display was all messed up and the trans was wonky. I replaced the PRND switch and all was well again. Also you are getting an evap code check the fuel tank vent valve, they are notorious for going bad. Now your air bag light...sorry, no idea, but would be curious what the problem is if you fix it.
What's prn
@@moneymig Park, Reverse, Neutral, Drive. It's the switch the tells you & vehicles what gear you're in.
@@MarkPdot where abouts was ur prnd switch location?
@@Redneck.trades_80 mine is on the driver's side of the transmission. Not too bad to replace.
@@MarkPdot was it the black box with the pigtail of 8 wires ? directly behind the shifting arm linkage?
The ball in the valve body closest to the bell housing will get stuck and cause this problem. Separator plate replacement and or neoprene ball replaced in that area of the plate,first flatten out the edges of the hole with a light hammer.
would this still be the cause if you can get it to shift by applying more or less throttle? also i assume you mean to flatten the old plate where it mushroomed the hole, not modification to the new plate, correct?
@@omgimagod6318 l
You start in first. So when it shifts the first time That’s not first it would be second
I got an 2011 1500 Silverado with the same problem what would the cause of it be?
Shift solenoid 1-2 & 2-3 or module replacement or both should fix. Remember to reset module if replaced..should do it.
Did you see if your o2 sensor and cats are good that what is going on with my truck right now
Why that if it’s a trans problem not exhaust problem
scan tool?
Having the same problem just changed trans and still doing the same..have any ideas yet?
Fuse
Try a new tps sensor , because when tps is not working properly, Transmision only works by oil pressure and it does not know how much you are pushing your throttle pedal
Computer mine was doing same and I overheard others commenting shop said trans looked fine then I changed pcm and it drove fine
@@michaelbaskinmichael9862 What is the pcm you are referring to if I may ask? Thank you.
TPS
Replace your solenoid in the transmission. Easy fix.
Drop guh our pan, pull your filter. You should have 2 solenoids side by side. May as well change them both while your in there. Online they cost about $13 advance had them in stock for $23. Change your filter while you got it off.
Good luck!
Thanks man I'll check into this, but yeah I do have an update video of it still doing the same thing coming out soon
@@tylermischief22 did you ever figure it out? Mines doing this right now. I’ll start my truck and all will be fine. I’ll turn it off and try again, then it won’t shift. It’s like every other time I start the truck it’s sticking in another gear
@@blakesproul9219 I do apologize I gotta get to making that new video of mine still doing the same thing with an update about what I’m going to do about it
Thanks broski!!!!
@@tylermischief22 did it work
Third and fourth clutch pack
i would guess its the 2-3 shift solenoid
2005 yukon same vs anyone figure this out yet?
I have a 2004 silverado 1500 that shifts to second gear in high rpms. The crazy thing is the truck only has 38000 miles. It's like new Inside and out. So it's not ware.
It did it once around 4 years ago, and didn't start up again until this week. 09/28/22
Having this problem right now did u find the problem?
Did you fix the problem?
@@jimmyrogers7494 turns out to be the whole trans man
This is the very problem my husbands truck has .. he has a rebuilt transmission an when it shifts to second it won’t shift to 3rd or 4th just reves up
Did you ever find a fix for this? Or figure out what the problem was?
Maybe ignition switch
Was there a fix for this. Same issue here
Did you fix the problem? I’m in the same situation with my truck
Same for me 2000 Chevy tahoe.
My 04 silverado has the exact same problem I had change the solenoids yesterday and new filter and trans fluid still have the same problem haven't checked the fuse though can it be the 1 2 shift accumulator ?
Have you resolved this mines doing the same thing
I had checked my fluid hot its was low but i still have the same problem only thing is I have to let off the gas go for it to shift so I am just going to rebuild mines until it goes out but my 1 to 2 shift is perfect just need to let off the gas for 3 and 4 so I don't know what it could be my guess is the clutches
time for new 3/4 clutch with 3rd clutch piston, you can say it’s time for mild rebuild.
@@cityboyant863 same problem lol
@@murdamob yea i have the same problem still its a pain in the ass when it doesn't want to shift into 3rd
You are in FIRST gear when you pull out!
My transmission slips from 2 to 3 and drive
Sometime the Corvette servo,
I'm having same problem. Been thru 2 Trans and 2 pcm
I have the same problem did you solved?
Try changing the b solenoid in the transmission, they cost about $20-26 a piece. I always change the a and b shift solenoids shake your old ones make sure the rattle. Take a small pick and a zip tie and work the shift valves out one at a time spray cleaner or gas in a squirt bottle and clean the ports and valves off good blow air to finish cleaning them. Dip valves in clean trans fluid and reinstall oil solenoid seal before installing, test drive if that doesn't fix it remove the heatsheild from the passenger side of trans
Look for the 1-4 shift servo above the pan and between the electrical plug and arch of bell housing about 3" around. Clean and brush around the inner cap. Push in on the center with a pry bar and insert a screwdriver onto slots and pry out retaining ring clean area and blow clean inner surface where ring was, let off pressure with prybar
Use channel lock pliers twist and pull servo cap out watch for inner piston to fall out remove the rest of servo spring and ban apply pin. Notice how sloppy the pistons all move around each other replace with new not remanufactured, oil new one with trans fluid and maybe a little vaseline around the cap seal and trans case reinstall drive it. Make sure your computer isnt the one that loses computer shift ground if so install jumper wire then test drive. Check and clear codes if it has code p0758 p0601-p0605 replace the computer
I have the code for lost speed sensor ground. Where do you jump the ground?
Damn Tim I wish you was still here
Dude lol when you start moving, its in first gear already. It doesnt shift into 1st your first shift is 2nd.
Thank you I'm glad somebody said it that is what I was getting on here to say when you're starting out your already in first!wow
I have first. And second ok second to third slips and third slips and drive slips
What happened to the transmission
@@vincentmangiarotti3400 sounds like 3/4 clutch pack is done or 3/4 piston is culprit. Having same problem with my 01 tahoe 4l60e starts off fine shifts ok goes to make 3rd gear shift and seems like it's in neutral even if I manually shift into 3rd nothing. Can limp around town in 2nd gear but who wants to do that. Hope that helps
💯🙌🤣🤣
Did u ever figure out what the problem was
Probably a solenoid
More than likely it’s the 3-4 clutch plate and honestly it would be easier to just buy a new trans
The the fuses in the door.
My jeep don’t shift at all lol idk what’s going on either
I had the same problem mine was the bottom that shows 2 w
4wf
4wb
Mine was on 4wb i change to 4 wd auto that took care off it good luck it work for me
@@julianrios7914 yes
What? So you put it in Auto and it worked?
Find you a transmission shop or rebuild it yourself, it’s time
Its not going into 3rd
Apparently it can be the 10 amp fuse inside the truck
Which one?
Yeah which one
Supposedly ignition 0 but idk that’s what I’ve heard I’m dealing with same bs
Can anybody tell me why I can manually shift into 1st an 2nd but drive an 3rd it feels like it wants to shift but it just stays in 2nd. It was sitting for a while, and before it felt like a neutral but all sudden, it actually does something just not shifting.
Same problem lmk WHT you find out
Same problem aswell
@@user-yz8id7is1g figured it out it was a sensor on top of the trans that needed to be cleaned all fixed
@@BlazinStationn What sensor I'm having same problem with mine tried to change the shift solenoids still not working
Well I'm looking at your tag and looking at your speedometer your tax showed that it was shifting in each gear don't know what else to say then you should look closer just shifts real easy.
Did you figure out what the problem was mine is doing the same thing
Did u ever figure it out the problem
Mine fucking too .. that sucks
TPS
What was the issue? Having same issue not shifting into 3rd or 4th. When I manually put it in 1st and 2nd no problem. But on Drive it doesn’t go anywhere.
Mee too
Did you find the problem? Mine just started doing this also
@@muddyriverreviewsz670 nope. Thinking it might be an electrical problem.
@@N8Rojas did you ever find the solution?
@@zachdowns5927 nope. Just going to install a TCU from US quick shift. That should fix any electrical issues. I did burn my 3-4 gear pack.
Bro I just started having this problem with my 04 Chevy Silverado 1500 4.8 was driving it then it sounded like something fell out of the transmission an I went from 3rd to first quick now it won’t go past 2nd gear still parks, reverse, goes into neutral. Fixing to drop the pan an change the fluid it’s black and thinking About getting the grand master solenoid kit an for some reason it won’t let my scanner read the codes I just wanna make sure I’m going on the right path or if it’s even worth it plus car payment suck especially after u haven’t had one in 4 years lol
Did you fix it?
It’s only in 2nd not going into 3rd
Chevy avalanche 07 doesn't want to go in the drive
You are in 1st gear when you pull out then it should go to 2nd
Lol it starts in 1st
Oh reset the solenoids after you change them.
How do you reset them?
That fuse wasnt blown, have you checked trans fluid level?
Yeah I checked the trans fluid its pink and not dark. I didn't think it was blown just thought it looked kinda burnt.
Well of course that's the first thing you do...we need the common problems
@@tylermischief22like a light pink on the dip stick or red
Well iv changed a transmission and it still did not fix the problem and I’m still stuck on it changed 2 of the 4 sensors in the transmission I’m stupied for not changing the other 2 but I was kinda broke at the moment but yeah if any one can figure this out please let me know
I'm getting the same thing with my new transmission It hasn't changed, so I have no clue what it is. I need to do update video
Its not the fuse
Check speed sensor
Mind started the same thing 04 avalanche
I have issue bad transmission speed sensor
Ignition switch
Hey You guys i Have a 202 Gmc Yukon Xl Just Bought it About 4 month Ago Drove well unntil About 3 months ago it shifts into 1st gear but when I get to 2nd and 3rd 4th gear it does not shift It's just rev un till I let off gass then it Shits to 3rd gear I really help Is notifying the problem
What did you do to fix your shifting problem?
Hi. I'm having the exact same issues with my transmission. Mine is a 06 Chevy Silverado 6cyl with automatic transmission too. How did you fix your problem?
Mine started doing the same thing.
try checking your sensor could be going bad and theres no connection getting from throttle body or transmission into the pedal
Did you find out? I have the same problem
bad 3-4 clutch pack
It needs a new transmission
gear shift solenoid.
That's not a 6.0l truck
It's the valve stems of the transmission they are sticking
Thanks man! I'm just waiting for it to go out at this point. Need to get my E36 Ute on the road.
Did you change both fuse
Yes
Abs speed sensor. Transmission speed sensor w/e
Body control module
Mine randomly lost 3 and 4, fluid was iffy had a nasty second gear slip for a bit. Just got it back with a new Trans, 1 and 2 are nice and strong but will not even attempt to grab 3 or 4. If I manually put truck into 3/4 it moves. I've read that it could be body control module and I also only have 1 working rear light so would that cause both problems? Annoyed cause I just paid for a trans to be put in and it still only has 1/2
Did u ever Mine says only goes to 40 miles an hour I really think it’s a electrical problem
At 6:38 you replace it in the wrong spot right? Earlier you took the fuse out the was next to gray fuses. Then you took out the fuse and replace it in the wrong spot according to your diagram. I just want to make sure you're seeing what I'm seeing.
Cheers.
James Martinez You might be right maybe I did. I’ll have to look back and check it. But thanks man! Truck is running better. And I’ll do an update video soon
@@tylermischief22 what was the problem mine is doing the same thing
@@damienurquhart4919 I’ll be uploading a video in a few days of what’s going on. Stay tuned!
Don’t leave us hanging. What was the issue. Lol
@@tylermischief22 which fuse is it
Did u find out what the problem was
no
@@tylermischief22 make an update I’m having same problem
Ever find the problem man
Not yet but it’s in the shop getting a new tranny out in.
@@tylermischief22 keep us posted please
Yes keep me posted to mine want get out of third and if I'm on the interstate my speedometer want go past 50 even when I'm going faster than 50
Figure out problem??!!
Speed sensor
Don't buy used, get that one rebuilt.
Thanks man! Looking into it now
I paid 2160.00 Bruce by Transmission
What fixed the issues
Nothing still driving it only does it here in there
I posted a recent video of why I haven’t got anything done to it.
Tps
If you're still driving it like that you're going to screw up your clutches just fix the solenoid like everybody says! Try changing the fluid if not reuse it when you change the solenoids
Replace the solenoids on the transaction
you need to change your fluid
I see what you mean but... I did that and changed the throttle sensor and I'm still having this problem any help would be good help
@@codyleroy9987 ever fix it???